Search   
MSDS 
:
 Sodamide
CAS 
:
 0-00-0
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |Sodamide | 100.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 14/15 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water liberating extremely flammable gases.
Causes burns.Corrosive.Water-reactive.Air sensitive.

Potential Health Effects
Eye:
May cause irreversible eye injury. Contact with eyes may cause
severe irritation, and possible eye burns.
Skin:
Causes skin burns. May cause deep, penetrating ulcers of the skin.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Reacts violently with water giving off flammable
gas which may explode. Flammable solid.
Extinguishing Media:
Do NOT use carbon dioxide. Use dry chemical to fight fire. Use
alcohol foam. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Remove all sources of
ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from strong acids. Keep away from water.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 0-00-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to gray white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 400 deg C
Freezing/Melting Point: 210 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Reacts violently with water
Specific Gravity/Density: Not available.
Molecular Formula: NaNH2
Molecular Weight: 39.0105

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, contact with
water, oxidizers.
Incompatibilities with Other Materials:
Reacts violently with acids, water, halocarbons. Please refer to Fire
Protection Guide to Hazardous materials for details.
Hazardous Decomposition Products:
Sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodamide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing Group: II
IMO
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing Group: II
RID/ADR
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 14/15 Reacts violently with water liberating
extremely flammable gases.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 0-00-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl trans-2-hydroxy-1-cyclopentanecarboxylate (>95%)
Sulfur 7704-34-9
Sulfolane 126-33-0
Succinic Anhydride 108-30-5
Styrene, stabilized with 10-15 ppm tert-butylcatechol 98-29-3
(+)-2,3-O-Isopropylidene-L-threitol, 98+% 50622-09-8
Sulfuric acid 20-55% w/v 7664-93-9
Steel Wool
Strontium Carbonate 1633-05-2
Sorbic Acid 110-44-1
Sodium thioglycollate 367-51-1
Sodium Tauroglycocholate 0-00-0
Sodium Starch Glycolate
Sodium Metasilicate 6834-92-0
Sodium Sesquicarbonate Dihydrate 6106-20-3
Tetra-Sodium Pyrophosphate Anhydrous 7722-88-5
Sodium Propionate 137-40-6
Sodium persulfate 7775-27-1
Sodium perborate tetrahydrate 10486-00-7
Sodium selenite 10102-18-8
Sodium Selenate Decahydrate 10102-23-5
Sodium Metavanadate 131718-26-8
Sodium Metaborate Tetrahydrate 15293-77-3
Sodium metasilicate pentahydrate 6834-92-0
Sodium Malonate 141-95-7
Sodium Hypophosphite 7681-53-0
Sodium Hypochlorite Solution 1310-73-2
Sodium Hydrogen Tartrate Monohydrate 526-94-3
Sodium bisulfate 7681-38-1
Sodium Hydrogen Selenite 7782-82-3
Di-Sodium Hydrogen Citrate, Sesquihydrate 6132-05-4
Sodium Sulfite Hydrated 10102-15-5
2-Chloro-4-ethylamino-6-isopropylamino-s-triazine, 98% 1912-24-9
1,5-Diphenyl-1,5-pentanedione, 99% (uv-vis) 6263-83-8
Disodium hydrogen orthophosphate dihydrate 7558-79-4
Sodium b-Glycerophosphate Hydrate 1300-25-0
Sodium Gluconate 527-07-1
N,n,n',n'-Tetramethyldiaminomethane, 99% 51-80-9
Sodium Formaldehyde Sulfoxylate 149-44-0
Sodium Fluorosilicate 16893-85-9
Sodium Fluoroborate 13755-29-8
Sodium Hexacyanoferrate (II) Decahydrate 59299-99-9
Sodium Dithionite 7775-14-6
Sodium Cacodylate 124-65-2
Sodium Bismuthate 12232-99-4
Sodium Arsenate,Hydrated 10048-95-0
Sodium Aluminate 1302-47-7
Sodium Alginate 9005-38-3
Sodamide 0-00-0
Soda lime granules 2390-59-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net