Search   
MSDS 
:
 3-(N-Methylpiperazine)-Propyl Bromide Hydrobromic Salt
CAS 
:
 0-00-1
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| Not available |3-(N-Methylpiperazine)-Propyl Bromide | ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 0-00-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H17N2BrHBr
Molecular Weight: 301.9474

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 0-00-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-(N-Methylpiperazine)-Propyl Bromide Hydrobromic Salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 0-00-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/02/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Chloromethyl-2-methylquinoline hydrochloride 0-00-1
2,4,5-Trifluoroaniline, 99% 367-34-0
2,4-Diamino-5-Phenylthiazole Monohydrobromide 6020-54-8
1,4-Dibromobenzene-d4, 98 atom% D 4165-56-4
5-Hydroxy-1-Naphthalenesulfonamide, 98% 17286-26-9
2-Ethyl-1,3-Cyclopentanedione, 99% 823-36-9
Sodium persulfate, 5-25% w/v 7732-18-5
3-Buten-2-ol, 98% 598-32-3
Tert.-butan(ol-d), 98+ atom % d 3972-25-6
Copper(II) chromate 13548-42-0
Five Alcohol Blend 67-63-0
Gas Generating Kit (Campylobacter System) 87-69-4
(Bromodifluoromethyl)triphenylphosphonium bromide, 97% 58201-66-4
Lancerclean Detergent 0-00-1
Casein, Tech. 9000-71-9
Lancerinse Lancer Acid 64-19-7
Sodium Hydroxide 6.25% W/V 1310-73-2
Oxalic Acid Potassium Salt, Dihydrate, 99% (Titr.) 127-96-8
L-Leucine-(4-Methyl-7-Coumarinylamide) Hydrochloride, 99% 62480-44-8
4 Alcohol Blend 71-23-8
4-(2-Thienyl)-3-O-MOP-B-Lactam 0-00-1
2,6-Dichloro-3-Nitrobenzenesulfonamide, 98% 89281-19-6
Water--UK 7732-18-5
Orthophosphoric acid, 2.5% w/w 7664-38-2
0.1% Trifluoroacetic acid blended into acetonitrile 75-05-8
3-Morpholinopropanoic Acid Hydrobromic Salt 4497-04-5
3-Morpholinopropanol 4441-30-9
3-Morpholinopropanal 1M solution in acetone 67-64-1
3-(N-Methylpiperazine)-Propanoic Acid Hydrobromide Salt 0-00-1
3-(N-Methylpiperazine)-Propanol 5317-33-9
3-(N-Methylpiperazine)propanal 1M solution in acetone. 0-00-1
3-(N-Methylpiperazine)-Propyl Bromide Hydrobromic Salt 0-00-1
3-[1H-(1,2,4-Triazolyl)]-Propanoic Acid 76686-84-5
3-[1H-(1,2,4-Triazolyl)]-Propanol 84497-70-1
3-[1H-(1,2,4-Triazoyl)]-Propanal 10% wt/v Solution in Dichloromethane 0-00-1
3-[1H-(1,2,4-Triazolyl)]-Propylbromide Hydrobromide Salt 0-00-1
3-[1H-(1,2,4-Triazoyl)]-Propanamine Dihydrochloride Salt 69807-82-5
Aqualine Electrolyte CG 67-56-1
Ethyl-2-Bromobenzoate, 98% 6091-64-1
Aqualine Electrolyte AG 0-00-0
2,6-Dichloro-3-nitrobenzenesulfonamide 89281-19-6
Oxoid Anaerogen 50-81-7
Pyridine, 65% in Water 110-86-1
Trans-1-Acetyl-4-Hydroxy-2-Proline 33996-33-7
1,1,1-Trifluoro-2,4-Pentanedione, 98% 367-57-7
Diaminethanetetra-Acetic Acid, Disodium Salt, 18.5 g/L Solution. 0-00-1
Sulfuric Acid/Orthophosphoric Acid Mixture 7664-38-2
Amberlyst xn-1010 ion-exchange resin 54991-00-3
Tetrakis(triphenylphosphine)nickel(0) 15133-82-1
Sodium Carbonate 0.274N 497-19-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net