Search   
MSDS 
:
 Trans-Stilbene, Scintillation Grade
CAS 
:
 103-30-0
SYNONYMS 
:
 Trans-1,1'-(1,2-Ethenediyl)bis(Benzene)
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 103-30-0 |Trans-Stilbene | 100 | 203-098-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Use
process enclosure, local exhaust ventilation, or other engineering
controls to control airborne levels.
Exposure Limits
CAS# 103-30-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: colorless to beige
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 306-307C
Freezing/Melting Point: 124.00 - 126.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 0.9707
Molecular Formula: C14H12
Molecular Weight: 180.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 103-30-0: WJ4926500
LD50/LC50:
CAS# 103-30-0: Oral, mouse: LD50 = 920 mg/kg.
Carcinogenicity:
Trans-Stilbene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 103-30-0: No information available.
Canada
CAS# 103-30-0 is listed on Canada's DSL List.
CAS# 103-30-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 103-30-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/27/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-(3,4-Dihydroxyphenyl)-2-Methyl-l-Alanine Sesquihydrate, 99% 555-30-6
DL-2-Methylglutamic Acid Hemihydrate, 99% 71-90-9
Berberine hydrochloride hydrate, 97% 633-65-8
Triethanolamine salicylate, 99% 0-00-1
3'-(Trifluoromethoxy)acetophenone, 97% 170141-63-6
2-(Aminomethyl)pyridine, 99% 3731-51-9
Platinum(ii) bromide, 98% 13455-12-4
2-Hydroxy-6-aminopurine, 98%
Trans-(+)-chrysanthemic acid, 99+%(gc) 4638-92-0
3,3'-Iminodipropionitrile, 99+% (GC) 111-94-4
Beta-d-thioglucose tetraacetate, 97% 28878-90-2
3-Hydroxy-4-Methoxybenzaldehyde, 98% 621-59-0
2-Naphthol-3,6-Disulfonic Acid Disodium Salt (Tech), 85% (UV-VIS) 135-51-3
4-Carboxybenzenesulfonyl azide, 99%(titr.) 17202-49-2
1-Methylcyclohexanol, 96% 590-67-0
N,N-Diethyl-4-Nitrosoaniline, 98% 120-22-9
2-Amino-2',5- Dichlorobenzophenone, 99% 2958-36-3
4-Hexyloxyphenol, 99% 18979-55-0
O,O-Bis(Diethoxyphosphoryl)Calix[4]Arene 97% (TLC) 0-01-1
3,4-Dihydro-2,2-Dimethyl-4-Oxo-2H-Pyran-6-Carboxylic Acid, 98% 80866-93-9
Lead Tetrafluoride, 99% 7783-59-7
4-Carbamoyl-2,2,5,5-tetramethyl-3-imidazol ine-3-oxide-1-oxyl,free 69826-43-3
N,N-Dimethylformamide dineopentyl acetal, 99% 4909-78-8
Diethyl Phosphate, 98% (Titr.) 598-02-7
2-Amino-4,6-Dihydroxypyrimidine, 98% 56-09-7
N-alpha-FMOC-L-Arginine, 99+% 91000-69-0
Ethyl Disulfide, 99% (GC) 110-81-6
4-Carboxybenzo-18-Crown-6, 99% 60835-75-8
Methyl 2-hydroxy-2-methoxyacetate, 95% 19757-87-2
Tetradecanedinitrile, 95% 0-01-1
Pentafluorobenzenesulfenyl chloride
Ammonium Sulfamate, Reagent ACS, 98+% (Titr.) 7773-06-0
2-Bromoindanone tech., 88-92% 1775-27-5
Trans-Stilbene, Scintillation Grade 103-30-0
4-Methylbenzyl Alcohol 98% 589-18-4
2,6-Diaminotoluene, 98% 823-40-5
2,6-Dichloro-4-Methylsulphonyl Phenol, 95+% 20951-05-7
Piperonylamine, 97% 2620-50-0
Undecanophenone, 98% 4433-30-1
2,4-Pyridinedicarboxylic Acid, 99+% 499-80-9
Dimethyl oxalate 99% 553-90-2
2-Amino-5-(4-nitrophenylsulfonyl)- thiazole 39565-05-4
exo-2-Bromonorbornane, 98% 2534-77-2
10,11-Dihydrocarbamazepine, 99% 3564-73-6
3,4-Dibromotoluene, 98+% 0-00-1
Cyclohexylmethanol, 99% 100-49-2
5-Chlorobenzoxazole, 99% 17200-29-2
4-Tert.-Butylcyclohexanecarboxylic Acid 99%, Cis/Trans Mixture 5451-55-8
Lauric acid sodium salt, 99% (titr.) 629-25-4
Bis(triphenyltin) oxide 1262-21-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net