**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 107-51-7 |Octamethyltrisiloxane | 98 | 203-497-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of very large amounts may cause generalized depression,
headache, and drowsiness.
Inhalation:
High vapor concentrations may cause drowsiness. May cause
respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause irritation.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Flammable liquid and
vapor. May accumulate static electrical charges, and may cause
ignition of its own vapors. Vapors are heavier than air and may
travel to a source of ignition and flash back. Vapors can spread
along the ground and collect in low or confined areas.
Extinguishing Media:
Use alcohol compatible foam, CO2 or water spray.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Forms smooth, slippery surfaces on
floors, posing an accident risk. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
away from heat, sparks and flame. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Use only with adequate ventilation. Avoid
breathing vapor. When heated to temperatures above 150C in the
presence of air, product can form formaldehyde vapors.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 107-51-7:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Glove protection is not normally required.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 153 deg C @ 760 mmHg
Freezing/Melting Point: -82 deg C
Autoignition Temperature: Not available.
Flash Point: 29 deg C ( 84.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Negligible.
Specific Gravity/Density: .8200 g/ml
Molecular Formula: C8H24O2Si3
Molecular Weight: 236.54
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, silicon dioxide, formaldehyde.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 107-51-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Octamethyltrisiloxane -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 107-51-7: No information available.
Canada
CAS# 107-51-7 is listed on Canada's DSL List.
CAS# 107-51-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107-51-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/30/1997 Revision #7 Date: 7/08/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Chloroacetic Acid, P.A.
| 79-11-8 |
|
N-Formyl-3-Methoxy-Morpholine, 95%
| 61020-09-5 |
|
Chloroacetic Acid, Flakes, 99%
| 79-11-8 |
|
Methanesulfonic Acid, Tech., 70%
| 75-75-2 |
|
Formic Acid, Reagent ACS, 96+% (Titr.)
| 64-18-6 |
|
Formic Acid, Reagent ACS, 88+% (Titr.)
| 64-18-6 |
|
Formic Acid, P.A.
| 64-18-6 |
|
Formic Acid, 99%
| 64-18-6 |
|
Hydrochloric Acid 1 N or 1 M Solution
| 7647-01-0 |
|
Hydrochloric Acid, C.P.
| 7647-01-0 |
|
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyrano syl bromide, 98.5%,
| 572-09-6 |
|
Hydrochloric Acid, Reagent ACS
| 7647-01-0 |
|
Hydrochloric Acid, P.A., Min. 37%
| 7647-01-0 |
|
Inosine 5'-Monophosphate, Disodium Salt Hydrate, 99+%
| 4691-65-0 |
|
Hydrochloric Acid, 0.1N Standard Solution
| 7647-01-0 |
|
Hydrochloric Acid, 1N Standard Solution
| 7647-01-0 |
|
Methyl 3-Trifluoromethylbenzoylacetate
| |
|
Deuterium Chloride, 20 wt% Solution in D2O 99+ Atom % D
| 7698-05-7 |
|
]1,3-Benzodioxole, 99%
| 274-09-9 |
|
Deuterium Oxide, 100.0 Atom % D
| 7789-20-0 |
|
Deuterium Oxide, 100.0 Atom % D Low in Paramagnetic Impurities
| 7789-20-0 |
|
Octamethyltrisiloxane, 98%
| 107-51-7 |
|
Water, Deuterium-Depleted
| 7732-18-5 |
|
Water for HPLC
| 7732-18-5 |
|
Ammonium Iron (II) Sulfate Hexahydrate, P.A.
| 7783-85-9 |
|
Ammonium Iron (II) Sulfate Hexahydrate, Reagent ACS (Crystals)
| 7783-85-9 |
|
Ammonium iron(iii) sulfate dodecahydrate, p.a.
| 7783-83-7 |
|
Ammonium iron(iii) sulfate dodecahydrate, reagent acs (crystals)
| 7783-83-7 |
|
Methyl Butyrate, 99% (GC)
| 623-42-7 |
|
Diphenylamine, 99%
| 122-39-4 |
|
Hydrochloric Acid 5 to 6N Solution in 2-Propanol
| 67-63-0 |
|
2,3-Benzofluorene, Tech.,90%
| 243-17-4 |
|
Diphenylamine, p.a.; redox-indicator
| 122-39-4 |
|
Silicon (IV) Chloride, 99.8+%
| 10026-04-7 |
|
Diphenylamine, reagent acs
| 122-39-4 |
|
Sodium Hypochlorite (5% Chlorine), Reagent
| 7681-52-9 |
|
Hydrochloric acid, 0.5N solution
| 7647-01-0 |
|
Hydrochloric acid, 2N solution
| 7647-01-0 |
|
Hydrochloric Acid, 1:1 Aqueous Solution
| 7647-01-0 |
|
Ferric Ammonium Sulfate Indicator Solution
| 7664-93-9 |
|
Hexamine Solution
| 100-97-0 |
|
Perchloric Acid, 0.100 N Solution
| 64-19-7 |
|
Phenolphthalein, 0.5% IPA Solution
| 67-63-0 |
|
Test MSDS
| 67-63-0 |
|
This is new.
| |
|
Hello
| |
|
fgfghjfgkh
| 4252-78-2 |
|
Sodium hydroxide, purum, pellets
| 1310-73-2 |
|
Sodium hydroxide, pellets, p.a.
| 1310-73-2 |
|
Sodium hydroxide, reagent ACS, pellets, 97+%
| 1310-73-2 |
|
|