Search   
MSDS 
:
 2,4-Dichlorophenol
CAS 
:
 120-83-2
SYNONYMS 
:
 2,4-Dichlorohydroxybenzene; 2,4-DCP.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 120-83-2 |2,4-Dichlorophenol | 100 | 204-429-6
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T C N
Risk Phrases: 22 24 34 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Toxic in contact with skin. Causes burns.
Toxic to aquatic organisms; may cause long-term adverse effects in
the aquatic environment.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
May be fatal if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes severe respiratory tract irritation with possible burns.
Chronic:
May cause liver and kidney damage. Chronic exposure may cause blood
effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
SPEEDY ACTION IS CRITICAL! Destroy contaminated shoes. In case of
contact, immediately flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Material may destroy the nerve endings in the skin; the absence of
pain does not necessarily mean the skin has been properly
decontaminated.
Antidote:
It is recommended that further amounts of 2,4-DCP may be removed
from the skin by repeatedly spraying/swabbing the skin with
polyethylene or polypropylene glycol mixtures, alternating with
rinsing with large quantities of water for 30 minutes.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Solid streams of water may spread fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Do not
breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or
on clothing. Use only with adequate ventilation.
Storage:
Store in a cool, dry place. Store in a tightly closed container. Do
not store in copper or copper alloy storage vessels. Moisture in
2,4-DCP increases the potential for corrosion, therefore, rendering
carbon steel inadequate as a material of construction. Stainless
steel should be avoided due to the potential for stress-corrosion
cracking.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower. EXPOSURE
GUIDELINE for 2,4-DCP: Dow Agrosciences industrial hygiene guideline
is 1 ppm, Skin. (Immediately absorbed through the skin in amounts
that have caused rapid death to humans).
Personal Protective Equipment

Eyes:
Wear chemical goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure. Nitrile or Neoprene gloves are recommended.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure. Recommended personal protective clothing
includes neoprene boots and suit of Saranex,
Neoprene, or Kapler CPF3.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: phenolic
pH: Not available.
Vapor Pressure: 0.07 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 209-210 deg C @ 760 mm Hg
Freezing/Melting Point: 41-44 deg C
Autoignition Temperature: 653 deg C ( 1,207.40 deg F)
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.382 @ 60/4C
Molecular Formula: C6H4Cl2O
Molecular Weight: 163.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents, acid chlorides, copper, steel, acid anhydrides.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 120-83-2: SK8575000
LD50/LC50:
Not available.
Carcinogenicity:
2,4-Dichlorophenol -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: 7.75 mg/l.; 96 hour; bioassay not specified

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing Group: II
IMO
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing Group: II
RID/ADR
Shipping Name: Toxic Solid, Corrosive, Organic, N.O.S.
Hazard Class: 6.1
UN Number: 2928
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C N
Risk Phrases:
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 34 Causes burns.
R 51/53 Toxic to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/Safety data sheets.
WGK (Water Danger/Protection)
CAS# 120-83-2: 3
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 120-83-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 120-83-2: Not available.
US FEDERAL
TSCA
CAS# 120-83-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #3 Date: 7/17/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Copper (II) Sulfide 1317-40-4
Copper (I) Cyanide 544-92-3
Copper (I) Iodide 7681-65-4
3-Amino-1-Propanol, 99% 156-87-6
Copper (I) Oxide 1317-39-1
Curcumin 458-37-7
Iso-Cyanatobenzene 103-71-9
Cyclohexane-1,2-dione 765-87-7
Cyclohexylamine 108-91-8
p-Cymene 99-87-6
L-Cysteine 52-90-4
L-Cysteine Hydrochloride Monohydrate 52-89-1
5-Fluorouracil, 99% 51-21-8
Poly(Ethyl Methacrylate), Sec. Stand., Aver. M.W.340000, Aver. 9003-42-3
gamma-Cyclodextrin 17465-86-0
Dabsyl Chloride 56512-49-3
Dansyl Aziridine 51908-46-4
Dansyl Hydrazine 33008-06-9
1-Decanesulfonic Acid, Sodium Salt 13419-61-9
N-(P-Aminobenzoyl)-L-Glutamic Acid Diethyl Ester, 99% 13726-52-8
Dextrin 9004-53-9
Diacetyl 431-03-8
1,2-Diaminoethane 16889-59-1
Diaminoethane tetra-Acetic Acid Diammonium Salt 20824-56-0
Diaminoethane tetra-Acetic Acid Dipotassium Salt Dihydrate 2001-94-7
Diaminoethane tetra-Acetic Acid Disodium Salt 139-33-3
Diaminoethane tetraacetic acid, tetrasodium salt tetrahydrate 64-02-8
2,4-Diaminophenol dihydrochloride 137-09-7
Dibenzo-18-crown-6 ether 14187-32-7
1,3-Dibromopropane 109-64-8
2,6-Di-tert-butyl-p-cresol 128-37-0
Di-n-butyl ether 142-96-1
Di-iso-butyl ketone 108-83-8
Dichloroacetic Acid 79-43-6
2,3-Dichloro-5,6-dicyanobenzoquinone 84-58-2
Dichlorofluorescein 76-54-0
1,1-Dichloromethyl Methyl Ether 4885-02-3
2,4-Dichlorophenol 120-83-2
Dicyclohexylamine 101-83-7
Dicyclohexylcarbodi-imide 538-75-0
Diethanolamine 111-42-2
1,1-Diethoxyethane 105-57-7
d-(-)-Lactic acid, lithium salt, 98% 27848-81-3
Diethylammonium Diethyl dithio-Carbamate 1518-58-7
Diethyl Carbonate 105-58-8
Di(2-ethylhexyl)phthalate 117-81-7
Diethyl Malonate 105-53-3
Diethyl oxalate 95-92-1
Diethyl Pyrocarbonate 1609-47-8
Diethyl Sulfate 64-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net