Search   
MSDS 
:
 Platinum(ii) bromide, 98%
CAS 
:
 13455-12-4
SYNONYMS 
:
 Platinous bromide; Platinum dibromide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13455-12-4 |Platinum (II) bromide | 98 | 236-648-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. May cause
sensitization by skin contact.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed. Avoid ingestion and inhalation. Use with adequate
ventilation. Wash clothing before reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13455-12-4:
United States OSHA: 0.002 mg/m3 TWA (as Pt) (listed under Platin
soluble salts).
Belgium - TWA: (listed as platinum soluble salts): 0.002 mg/m3 VL
(as Pt)
Japan: (listed as platinum soluble salts): 0.001 mg/m3 OEL (as Pt
Malaysia: (listed as platinum soluble salts): 0.002 mg/m3 TWA (as
Netherlands: (listed as platinum soluble salts): 0.002 mg/m3 MAC
Pt)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 250 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 250 deg C
Solubility in water: Not available.
Specific Gravity/Density: 6.6500g/cm3
Molecular Formula: Br2Pt
Molecular Weight: 354.90

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen bromide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13455-12-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Platinum (II) bromide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 24 Avoid contact with skin.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 13455-12-4: 1
Canada
CAS# 13455-12-4 is listed on Canada's NDSL List.
CAS# 13455-12-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13455-12-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-(3,4-Dihydroxyphenyl)-2-Methyl-l-Alanine Sesquihydrate, 99% 555-30-6
DL-2-Methylglutamic Acid Hemihydrate, 99% 71-90-9
Berberine hydrochloride hydrate, 97% 633-65-8
Triethanolamine salicylate, 99% 0-00-1
3'-(Trifluoromethoxy)acetophenone, 97% 170141-63-6
2-(Aminomethyl)pyridine, 99% 3731-51-9
Platinum(ii) bromide, 98% 13455-12-4
2-Hydroxy-6-aminopurine, 98%
Trans-(+)-chrysanthemic acid, 99+%(gc) 4638-92-0
3,3'-Iminodipropionitrile, 99+% (GC) 111-94-4
Beta-d-thioglucose tetraacetate, 97% 28878-90-2
3-Hydroxy-4-Methoxybenzaldehyde, 98% 621-59-0
2-Naphthol-3,6-Disulfonic Acid Disodium Salt (Tech), 85% (UV-VIS) 135-51-3
4-Carboxybenzenesulfonyl azide, 99%(titr.) 17202-49-2
1-Methylcyclohexanol, 96% 590-67-0
N,N-Diethyl-4-Nitrosoaniline, 98% 120-22-9
2-Amino-2',5- Dichlorobenzophenone, 99% 2958-36-3
4-Hexyloxyphenol, 99% 18979-55-0
O,O-Bis(Diethoxyphosphoryl)Calix[4]Arene 97% (TLC) 0-01-1
3,4-Dihydro-2,2-Dimethyl-4-Oxo-2H-Pyran-6-Carboxylic Acid, 98% 80866-93-9
Lead Tetrafluoride, 99% 7783-59-7
4-Carbamoyl-2,2,5,5-tetramethyl-3-imidazol ine-3-oxide-1-oxyl,free 69826-43-3
N,N-Dimethylformamide dineopentyl acetal, 99% 4909-78-8
Diethyl Phosphate, 98% (Titr.) 598-02-7
2-Amino-4,6-Dihydroxypyrimidine, 98% 56-09-7
N-alpha-FMOC-L-Arginine, 99+% 91000-69-0
Ethyl Disulfide, 99% (GC) 110-81-6
4-Carboxybenzo-18-Crown-6, 99% 60835-75-8
Methyl 2-hydroxy-2-methoxyacetate, 95% 19757-87-2
Tetradecanedinitrile, 95% 0-01-1
Pentafluorobenzenesulfenyl chloride
Ammonium Sulfamate, Reagent ACS, 98+% (Titr.) 7773-06-0
2-Bromoindanone tech., 88-92% 1775-27-5
Trans-Stilbene, Scintillation Grade 103-30-0
4-Methylbenzyl Alcohol 98% 589-18-4
2,6-Diaminotoluene, 98% 823-40-5
2,6-Dichloro-4-Methylsulphonyl Phenol, 95+% 20951-05-7
Piperonylamine, 97% 2620-50-0
Undecanophenone, 98% 4433-30-1
2,4-Pyridinedicarboxylic Acid, 99+% 499-80-9
Dimethyl oxalate 99% 553-90-2
2-Amino-5-(4-nitrophenylsulfonyl)- thiazole 39565-05-4
exo-2-Bromonorbornane, 98% 2534-77-2
10,11-Dihydrocarbamazepine, 99% 3564-73-6
3,4-Dibromotoluene, 98+% 0-00-1
Cyclohexylmethanol, 99% 100-49-2
5-Chlorobenzoxazole, 99% 17200-29-2
4-Tert.-Butylcyclohexanecarboxylic Acid 99%, Cis/Trans Mixture 5451-55-8
Lauric acid sodium salt, 99% (titr.) 629-25-4
Bis(triphenyltin) oxide 1262-21-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net