Search   
MSDS 
:
 1-Triphenylphosphoranylidene-2-Propanone,  99%
CAS 
:
 1439-36-7
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1439-36-7 |1-Triphenylphosphoranylidene-2-Propano| 99 | 215-878-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Air sensitive.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation. Place under an inert
atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Handle
under an inert atmosphere. Store protected from air.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 1439-36-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 203.00 - 205.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C21H19OP
Molecular Weight: 318.34

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to air, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, air.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1439-36-7: UC3900000
LD50/LC50:
Not available.
Carcinogenicity:
1-Triphenylphosphoranylidene-2-Propanone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1439-36-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1439-36-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1439-36-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propargyl bromide, 80 wt% solution in toluene, stabilized 106-96-7
Carbowax PEG 8000 25322-68-3
1-Bromopentane, 98% 110-53-2
Hydrindantin dihydrate, 96% 5950-69-6
Benzylacetone, 98% 2550-26-7
2-Amino-5-Chlorobenzophenone Oxime, Mixture of Syn and Anti Isomers 18097-52-4
Trimethylacetaldehyde 630-18-2
Polyvinyl Alcohol 9002-89-5
Tetraphenyltin, 97% 595-90-4
Potassium Metal 7440-09-7
1-Chloro-2-Fluorobenzene, 99% 348-51-6
Potassium Acetate 127-08-2
5-Fluorocytosine, 99+% 2022-85-7
Trichloroisocyanuric Acid, 99% (Titr.) 87-90-1
Potassium Bitartrate 868-14-4
Solketal, 97+%(GC) 100-79-8
Aluminum Potassium Sulfate Dodecahydrate 7784-24-9
1,4-Naphthoquinone-2-Sulfonic Acid, Potassium Salt 34169-62-5
1,2,3,4-Tetrahydro-1-Naphthylamine 2217-40-5
12-Crown-4, 97+% 294-93-9
Dimethyl Nitroterephthalate, 99% 5292-45-5
3-Nitrobenzamide, 98% 645-09-0
3-Pyridinesulfonic acid, 98% (titr.) 636-73-7
2-Methyltetrahydrofuran 99+% stabilized with 1% Butylated 96-47-9
Potassium Bicarbonate 298-14-6
Cyclobutyl-4-fluorophenyl ketone, 98% 31431-13-7
1-Triphenylphosphoranylidene-2-Propanone, 99% 1439-36-7
Methyl 3,5-Dimethoxy-4-Hydroxybenzoate, 98% 884-35-5
2-Amino-5-Iodobenzoic Acid, 99% 5326-47-6
5-Bromo-2-Chlorobenzoic Acid, 98% 21739-92-4
Potassium Bromide 7758-02-3
2-Acetylbenzoic acid, 99% 577-56-0
Potassium carbonate anhydrous 584-08-7
Potassium chlorate 3811-04-9
2-Bromohexadecanoic acid, 98%. 18263-25-7
Diphenylmercury 587-85-9
Potassium chloride 7447-40-7
2-(Tert-Butylamino)ethanol, 99+% 4620-70-6
Potassium chromate 7789-00-6
Potassium Citrate Monohydrate 6100-05-6
2-Methoxybenzyl alcohol, 99% 612-16-8
Chromium (III) Potassium Sulfate Dodecahydrate 7788-99-0
Potassium Cyanide 151-50-8
Oxalyl chloride, 98% 79-37-8
Amberlyst 15(wet) ion-exchange resin 9037-24-5
Potassium dichromate 7778-50-9
Potassium ferricyanide 13746-66-2
Potassium Ferrocyanide Trihydrate 14459-95-1: Oral, rat
3-Sulfobenzoic Acid Disodium Salt Mono- Hydrate 14995-40-5
Methylene Blue 61-73-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net