**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 15199-43-6 |DIMETHYL-D6 SULFATE | | 239-257-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 25 26 34 45
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic if swallowed. Very toxic by inhalation. Causes burns. May
cause cancer.Carcinogen.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. Causes redness and pain.
Skin:
Causes skin burns. Causes redness and pain.
Ingestion:
Poison by ingestion. Causes gastrointestinal tract burns. Causes
severe pain, nausea, vomiting, diarrhea, and shock.
Inhalation:
May be fatal if inhaled. Effects may be delayed. May cause
irritation of the respiratory tract with burning pain in the nose and
throat, coughing, wheezing, shortness of breath and pulmonary edema.
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
May cause liver and kidney damage. May cause cancer in humans.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustible liquid.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 15199-43-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 60 - 61 deg C @ 7.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 83 deg C ( 181.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3970g/cm3
Molecular Formula: C2D6O4S
Molecular Weight: 132.18
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases - ammonia - sodium azide.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 15199-43-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
DIMETHYL-D6 SULFATE -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: DIMETHYL SULPHATE
Hazard Class: 6.1 (8)
UN Number: 1595
Packing Group:
IMO
Shipping Name: DIMETHYL SULPHATE
Hazard Class: 6.1
UN Number: 1595
Packing Group: I
RID/ADR
Shipping Name: DIMETHYL SULPHATE
Hazard Class: 6.1
UN Number: 1595
Packing group: I
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 45 May cause cancer.
R 25 Toxic if swallowed.
R 26 Very toxic by inhalation.
R 34 Causes burns.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 15199-43-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 15199-43-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 15199-43-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Methyl 2-isocyano-3-methylpentanoate, 96%
| 0-01-1 |
|
4-Bromobenzonitrile, 98%
| 623-00-7 |
|
Methyl 3,4,5-Trihydroxybenzoate, 99 %
| 99-24-1 |
|
3-Hydroxy-2-nitropyridine, 97%
| 15128-82-2 |
|
Methyl 2-isocyano-3-methylbutyrate, 96%
| 40846-66-0 |
|
Methyl 3-isocyanopropionate, 96%
| 0-01-1 |
|
Methyl 2-isocyanopropionate, 96%
| 33115-74-1 |
|
1-Isocyano-3-isopropoxypropane, 96%
| 602262-07-7 |
|
1,1,3,3-Tetramethylbutyl isocyanide
| 14542-93-9 |
|
2,3-Dihydro-6-isocyano-1,4-benzodioxine, 95%
| 174092-82-1 |
|
Butyl Lactate, 99% (GC)
| 138-22-7 |
|
Dimethyl-d6 sulfate, 99+ atom % d
| 15199-43-6 |
|
Cyclopentyl isocyanide, 96%
| 68498-54-4 |
|
2-Cyclohexen-1-ylethyl isocyanide, 96%
| 172223-58-4 |
|
Diphenylmethyl isocyanide, 96%
| 3128-85-6 |
|
Methyl 2-isocyano-3-phenylpropionate, 96%
| 63157-14-2 |
|
alpha-Methylbenzyl isocyanide, 96%
| 17329-20-3 |
|
4-Fluorophenyl isocyanide, 95%
| 24075-34-1 |
|
3-Phenylpropyl isocyanide, 96%
| 111944-21-9 |
|
Phenylethyl isocyanide, 96%
| 59795-89-0 |
|
Benzo[a]pyrene, 96.5%
| 50-32-8 |
|
1-(Trifluoroacetyl)imidazole, 95%
| 1546-79-8 |
|
Ethylurea, 97%
| 625-52-5 |
|
1-Naphthalenemethanol, 98%
| 4780-79-4 |
|
Trimethylaluminum, 1,0M solution in heptane
| 75-24-1 |
|
Triisobutylaluminium, 1.1M solution in toluene
| 100-99-2 |
|
Ethylmagnesium chloride, 2.0M solution in THF
| 109-99-9 |
|
Triethylaluminium, 1,3M solution in heptane
| 97-93-8 |
|
Diethylzinc, 1,5M solution in toluene
| 108-88-3 |
|
Sodium thiophosphate hydrate
| 10489-48-2 |
|
cis-2,6-Dimethylmorpholine, 97%
| 6485-55-8 |
|
N-(2-Chloroethyl)pyrrolidine hydrochloride, 98%
| 7250-67-1 |
|
MP Alumina R, ICN material
| 1344-28-1 |
|
Tributylborane, 98%
| 122-56-5 |
|
L(-)-10-Camphorsulfonyl chloride
| 39262-22-1 |
|
Sodium cyanoborohydride, solution in THF
| 109-99-9 |
|
1-Phenyl-2-propanol, 99%
| 14898-87-4 |
|
N-(4-Dimethylamino-3,5-dinitrophenyl)maleimide
| 3475-74-9 |
|
8-Chloro-1-octanol, 98%
| 23144-52-7 |
|
1,10-Diamino-4,7-dioxadecane
| 2997-01-5 |
|
(4-Methoxybenzylidene)malonitrile, 98%
| 2826-26-8 |
|
1-(2-Hydroxyphenyl)piperazine, 98%
| 1011-17-2 |
|
5-Bromo-2-methylaniline, 98%
| 39478-78-9 |
|
1-Iodo-3-methylbutane, stabilized, 98%
| 541-28-6 |
|
2,4,6-Trivinylcyclotriboroxane-pyridine complex
| 92988-08-4 |
|
2-Methyl-5-nitroanisole, 99%
| 13120-77-9 |
|
Methyl 3-benzoylpropionate, 97%
| 25333-24-8 |
|
Ethyl 3-methylbenzoate, 98%
| 120-33-2 |
|
3,4-Dichlorostyrene, stabilized, 95%
| 2039-83-0 |
|
Dihydroquinine hydrobromide hydrate
| 0-01-1 |
|
|