Search   
MSDS 
:
 Beryllium acetate
CAS 
:
 19049-40-2
SYNONYMS 
:
 Beryllium oxide acetate; Beryllium oxyacetate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 19049-40-2 |Beryllium acetate, basic | 100 | 242-785-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 25 26 36/37/38 43 49 48/23

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Very toxic by inhalation. Irritating to eyes,
respiratory system and skin. May cause sensitization by skin
contact. May cause cancer by inhalation. Toxic : danger of serious
damage to health by prolonged exposure through inhalation.Cancer
suspect agent.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed. Repeated or prolonged exposure may cause
allergic reactions in sensitive individuals. Chronic beryllium
disease, an immunologically mediated response occurring after a
latent period ranging from a few weeks to many years, causes
difficult breathing on exertion, weight loss, nonproductive cough,
fatigue, chest pain, anorexia, and weakness. Cancer suspect agent.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Poison room
locked.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 19049-40-2:
United Kingdom, WEL - TWA: (listed as beryllium compounds, n.o.s.
0.002 mg/m3 TWA (as Be)
United Kingdom, WEL - STEL: (listed as beryllium compounds, n.o.s
0.006 mg/m3 STEL (as Be)
United States OSHA: 2 ug/m3 TWA (listed under Beryllium compound
n.o.s.).5 ??g/m3 Ceiling (listed under Beryllium compounds, n.o.s
Belgium - TWA: (listed as beryllium compounds, n.o.s.): 0.002 mg/
VLE (as Be)
France - VME: (listed as beryllium compounds, n.o.s.): 0.002 mg/m
VME (as Be)
Germany: (listed as beryllium compounds, n.o.s.): 0.002 mg/m3 VME
Be)
Japan: (listed as beryllium compounds, n.o.s.): 0.002 mg/m3 OEL (
Be)
Malaysia: (listed as beryllium compounds, n.o.s.): 0.002 mg/m3 TW
(as Be)
Russia: (listed as beryllium compounds, n.o.s.): 0.001 mg/m3 TWA
Be)
Spain: (listed as beryllium compounds, n.o.s.): 0.002 mg/m3 VLA-E
(except aluminium beryllium silicates, as Be)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 331 deg C
Freezing/Melting Point: 284 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3600g/cm3
Molecular Formula: C12H18O13Be4
Molecular Weight: 406.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 19049-40-2: DS2900000
LD50/LC50:
Not available.
Carcinogenicity:
Beryllium acetate, basic -
California: carcinogen, initial date 10/1/87 (listed as Beryllium comp
NTP: Known carcinogen (listed as Beryllium compounds, n.o.s.).
IARC: Group 1 carcinogen (listed as Beryllium compounds, n.o.s.)
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: BERYLLIUM COMPOUND N.O.S. (BERYLLIUM ACETATE, BASI
C)
Hazard Class: 6.1
UN Number: 1566
Packing Group: II
IMO
Shipping Name: BERYLLIUM COMPOUND N.O.S. (BERYLLIUM ACETATE, BASI
C)
Hazard Class: 6.1
UN Number: 1566
Packing Group: II
RID/ADR
Shipping Name: BERYLLIUM COMPOUND N.O.S. (BERYLLIUM ACETATE, BASI
C)
Hazard Class: 6.1,54b
UN Number: 1566
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 49 May cause cancer by inhalation.
R 25 Toxic if swallowed.
R 26 Very toxic by inhalation.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
R 48/23 Toxic : danger of serious damage to health
by prolonged exposure through inhalation.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 19049-40-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 19049-40-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 19049-40-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/27/2001 Revision #2 Date: 9/03/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Antimony Silicate (Tungsten Doped) 1314-35-8
Beryllium atomic absorption standard solution, 1mg/ml Be in 2% HNO3 7440-41-7
Ammonium Standard, 1000ppm (as N) 7732-18-5
1-Bromopropane, 99% 106-94-5
Thallium Atomic Absorption Standard Solution, 1mg.ml Tl in 2% HNO3 7440-28-0
1,4-Dioxane, Reagent ACS 123-91-1
GASAB 0-01-1
Nicotine Solution, Cigarette 0-01-1
1,6-Heptadien-4-ol, 97% 2883-45-6
Carbol Fuchsin 108-95-2
(S)-2-Amino-3-Methoxypropanoic Acid, 98% 32620-11-4
(R)-(-)-5-Hydroxymethyl-2-Pyrroldinone 66673-40-3
(S)-(+)-5-Triloxymethyl-2-Pyrrolidinone 105526-85-0
N,N-Didecyl-1-Decanamine (Pract) (Isomeric Mixture) 1070-01-5
R-(+)-3-Pyrrolidinol 2799-21-5
Ruthenium atomic absorption standard solution, 1 mg/ml ru in 10% hcl
Isophthalaldehyde, 99% 626-19-7
3-(Methylthio)propionaldehyde, 95% (GC) 3268-49-3
3-Nitropropionic acid, 99% 504-88-1
Chromium standard metal solution in 2% nitric acid 7440-47-3
Cobalt Chloride 7646-79-9
Arsenic standard metal solution, 1000 ppm in 2% HNO3 1327-53-3
n-(3-Bromopropyl)-phthalimide 5460-29-7
2-Hydroxymethyl-1,4-Benzodioxan, 98%(GC) 3663-82-9
Cyclohexanebutyric acid, 99% 4441-63-8
ICP Standard Metal Solution in Hydrochloric Acid 0-00-0
Arsenic standard metal solution, 10000 ppm in 5% HNO3 1327-53-3
2-Methyl-3-Methoxypyrazine, 70-90%, Balance 10-30% 63450-30-6
CRANCO 67-64-1
2,4'-Dibromoacetophenone, 98% 99-73-0
2,3-Diaminopropionic Acid Hydrobromide 98 % 18635-45-5
Matrix 1 7732-18-5
Matrix 2 7664-39-3
Matrix 3 7664-39-3
Beryllium acetate 19049-40-2
Hafnium oxychloride octahydrate 13759-17-6
Ammonium Hexafluorotantalate 33380-11-9
Ammonium Tetraborate 0-01-1
3-Amino-2,4-dimethylpentane, 98+% 4083-57-2
3-Bromo-4-Fluorobenzonitrile, 98% 79630-23-2
Sodium dichromate 10588-01-9
2,4-Dinitrofluorobenzene 70-34-8
Phenylmalonic acid, 99% 2613-89-0
Carbonylbis-(triphenylphosphine)-rhodium (I) chloride 13938-94-8
2,2'-Methylenebisbenzothiazole, 97% 1945-78-4
Chromosulfuric acid 7664-93-9
Lead (II) Hydroxyacetate 0-01-1
Ethyl 3,4,5-Trimethoxybenzoylacetate
Hydrofluoric Acid (Hydrogen Fluoride, liquefied) 7664-39-3
Lactic acid, reagent ACS 50-21-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net