Search   
MSDS 
:
 2-Methoxyethyl Acetoacetate, 97%
CAS 
:
 22502-03-0
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 22502-03-0 |2-Methoxyethyl Acetoacetate | 97% | 245-043-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 22502-03-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 120 deg C @ 20.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 103 deg C ( 217.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0900g/cm3
Molecular Formula: C7H12O4
Molecular Weight: 160.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Acids, bases, oxidizing agents, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 22502-03-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methoxyethyl Acetoacetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 22502-03-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 22502-03-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22502-03-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2',4'-Dimethylacetoacetanilide 97-36-9
2,5-Dihydroxybenzoic Acid, 99% 490-79-9
Mandelonitrile, tech. 532-28-5
N-Acetylsulfanilyl Chloride, 99%(Titr.) 121-60-8
DL-Amethopterin hydrate 60388-53-6
D-Ethionine, 98% 535-32-0
Boron trichloride, 1M solution in methylene chloride 75-09-2
2,4,4-Trimethyl-2-Oxazoline, 99% 1772-43-6
4-Nitrophenyl Isothiocyanate 2131-61-5
Norephedrine Hydrochloride, 98% (Titr.) 3195-78-6
Diethyl phenylphosphonite, 99% 1638-86-4
2,3-Dichlorobutane, 98% 7581-97-7
1,1-Diphenylethylene, 99% (GC) 530-48-3
2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate, stab. w/ 92-84-2
1-Hydroxybenzotriazole, 98% 2592-95-2
3',4'-Dimethylacetophenone, 97% 3637-01-2
4-Chloro-alpha-methylbenzylamine, 97% 6299-02-1
4-Phenylazophenol, 97% (UV-Vis) 1689-82-3
Diethyl oxalate, 99% 95-92-1
l-Lysine dihydrochloride, 99% 657-26-1
2-Iodobenzoyl Chloride, 98+% 609-67-6
2-Chloronicotinamide, 98% 10366-35-5
2-Thenylmercaptan, 98% 6258-63-5
2-??4-(4-dimethylaminophenyl)-1,3- butadienyl??-3-ethylbenzothiazolium 114720-33-1
3-Chloro-2-methylpropionitrile, tech., 85+% 7659-45-2
Sodium Deuteroxide (30 wt. % Solution in D2O), 99+ Atom % D 7732-18-5
Succinyl chloride, ca 95 % 543-20-4
2-Chloro-4-fluorobenzyl chloride, 98% 93286-22-7
1-(2,4-Dichlorophenyl)-1-Propanone 95% 37885-41-9
3-Ethoxyphenol, 98% (gc) 621-34-1
Rhodium on alumina powder (5% rh)
Dibutyltin bis(2-ethylhexanoate) 2781-10-4
2,4-Diamino-6-phenyl-s-triazine, 99+% (titr.) 91-76-9
Ethyl Methylcarbamate, 99% (GC) 105-40-8
(4-Aminophenyl)trimethylammonium iodide hydrochloride, 94% 62654-12-0
2,2,5,5-Tetramethyl-3-Pyrrolidine- Carboxamide 702-96-5
Celestine blue 1562-90-9
1-(2-Furyl)-1,3-butanedione 25790-35-6
N-alpha-Benzoyl-dl-arginine-p-nitroanilide hydrochloride, 99+% 911-77-3
Hydroxy Naphthol Blue, Disodium Salt, P.A. 29114-66-7
Linoleic acid (techn), 60% (gc) 60-33-3
Octafluorotoluene, 98% 434-64-0
Cacodylic acid sodium salt, trihydrate 124-65-2
2-Methoxyethyl Acetoacetate, 97% 22502-03-0
2-(2-Thienyl)pyridine, 97+% 3319-99-1
Naphthol green b 19381-50-1
2,4,5-Trimethyloxazole, 95% 20662-84-4
P-Arsanilic Acid, 99% (UV-Vis) 98-50-0
(S)-(+)-10-Methyl-1(9)-Octal-2-One,98.5% 4087-39-2
Indole-3-pyruvic acid , 97% 392-12-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net