Search   
MSDS 
:
 1-Hydroxybenzotriazole, 98%
CAS 
:
 2592-95-2
SYNONYMS 
:
 HOBT
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2592-95-2 |1-Hydroxybenzotriazole | 98.0 | 219-989-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11 44

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Risk of explosion if heated under
confinement.Light sensitive.

Potential Health Effects
Eye:
Dust may cause mechanical irritation. May cause lacrimation
(tearing), blurred vision, and photophobia. May cause chemical
conjunctivitis and corneal damage.
Skin:
May cause skin irritation and possible burns.
Ingestion:
May cause irritation of the digestive tract. May cause nausea,
vomiting, abdominal pain, and increased salivation.
Inhalation:
Inhalation of dust may cause respiratory tract irritation. Olfactory
fatigue may occur. Can produce delayed pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Dust can be
an explosion hazard when exposed to heat or flame. Flammable solid.
May burn rapidly with flare burning effect. May re-ignite after fire
is extinguished. Containers may explode when heated. Risk of
explosion if heated under confinement.
Extinguishing Media:
Use water spray to cool fire-exposed containers. For large fires,
use water spray, fog or regular foam. Contact professional
fire-fighters immediately. For small fires, use dry chemical, carbon
dioxide, sand, earth, water spray or regular foam. Cool containers
with flooding quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Scoop up with a nonsparking tool,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Remove all sources of ignition. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2592-95-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 157 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 157 deg C
Solubility in water: 0.3% (20C)
Specific Gravity/Density:
Molecular Formula: C6H5N3O
Molecular Weight: 135.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. Heating above 180C results in rapid exothermic
decomposition. Heating may cause an explosion.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants, heating above the melting point (155-158C).
Incompatibilities with Other Materials:
Strong oxidizing agents, copper nitrate.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2592-95-2: DM1288000
LD50/LC50:
CAS# 2592-95-2: Draize test, rabbit, eye: 100 mg Mild.
Carcinogenicity:
1-Hydroxybenzotriazole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.*
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
IMO
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
R 44 Risk of explosion if heated under confinement.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 2592-95-2: No information available.
Canada
CAS# 2592-95-2 is listed on Canada's DSL List.
CAS# 2592-95-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2592-95-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/17/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2',4'-Dimethylacetoacetanilide 97-36-9
2,5-Dihydroxybenzoic Acid, 99% 490-79-9
Mandelonitrile, tech. 532-28-5
N-Acetylsulfanilyl Chloride, 99%(Titr.) 121-60-8
DL-Amethopterin hydrate 60388-53-6
D-Ethionine, 98% 535-32-0
Boron trichloride, 1M solution in methylene chloride 75-09-2
2,4,4-Trimethyl-2-Oxazoline, 99% 1772-43-6
4-Nitrophenyl Isothiocyanate 2131-61-5
Norephedrine Hydrochloride, 98% (Titr.) 3195-78-6
Diethyl phenylphosphonite, 99% 1638-86-4
2,3-Dichlorobutane, 98% 7581-97-7
1,1-Diphenylethylene, 99% (GC) 530-48-3
2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate, stab. w/ 92-84-2
1-Hydroxybenzotriazole, 98% 2592-95-2
3',4'-Dimethylacetophenone, 97% 3637-01-2
4-Chloro-alpha-methylbenzylamine, 97% 6299-02-1
4-Phenylazophenol, 97% (UV-Vis) 1689-82-3
Diethyl oxalate, 99% 95-92-1
l-Lysine dihydrochloride, 99% 657-26-1
2-Iodobenzoyl Chloride, 98+% 609-67-6
2-Chloronicotinamide, 98% 10366-35-5
2-Thenylmercaptan, 98% 6258-63-5
2-??4-(4-dimethylaminophenyl)-1,3- butadienyl??-3-ethylbenzothiazolium 114720-33-1
3-Chloro-2-methylpropionitrile, tech., 85+% 7659-45-2
Sodium Deuteroxide (30 wt. % Solution in D2O), 99+ Atom % D 7732-18-5
Succinyl chloride, ca 95 % 543-20-4
2-Chloro-4-fluorobenzyl chloride, 98% 93286-22-7
1-(2,4-Dichlorophenyl)-1-Propanone 95% 37885-41-9
3-Ethoxyphenol, 98% (gc) 621-34-1
Rhodium on alumina powder (5% rh)
Dibutyltin bis(2-ethylhexanoate) 2781-10-4
2,4-Diamino-6-phenyl-s-triazine, 99+% (titr.) 91-76-9
Ethyl Methylcarbamate, 99% (GC) 105-40-8
(4-Aminophenyl)trimethylammonium iodide hydrochloride, 94% 62654-12-0
2,2,5,5-Tetramethyl-3-Pyrrolidine- Carboxamide 702-96-5
Celestine blue 1562-90-9
1-(2-Furyl)-1,3-butanedione 25790-35-6
N-alpha-Benzoyl-dl-arginine-p-nitroanilide hydrochloride, 99+% 911-77-3
Hydroxy Naphthol Blue, Disodium Salt, P.A. 29114-66-7
Linoleic acid (techn), 60% (gc) 60-33-3
Octafluorotoluene, 98% 434-64-0
Cacodylic acid sodium salt, trihydrate 124-65-2
2-Methoxyethyl Acetoacetate, 97% 22502-03-0
2-(2-Thienyl)pyridine, 97+% 3319-99-1
Naphthol green b 19381-50-1
2,4,5-Trimethyloxazole, 95% 20662-84-4
P-Arsanilic Acid, 99% (UV-Vis) 98-50-0
(S)-(+)-10-Methyl-1(9)-Octal-2-One,98.5% 4087-39-2
Indole-3-pyruvic acid , 97% 392-12-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net