Search   
MSDS 
:
 Cyclobutyl-4-fluorophenyl ketone, 98%
CAS 
:
 31431-13-7
SYNONYMS 
:
 CFK.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 31431-13-7 |Cyclobutyl-4-fluorophenyl ketone | 98 | 250-628-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. Prolonged and/or repeated
contact may cause defatting of the skin and dermatitis. May cause
irritation with pain and stinging, especially if the skin is abraded.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause kidney damage. May cause central nervous system
depression, characterized by excitement, followed by headache,
dizziness, drowsiness, and nausea. Advanced stages may cause
collapse, unconsciousness, coma and possible death due to respiratory
failure.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Inhalation of vapor may cause respiratory tract irritation.
Chronic:
May cause allergic skin reaction in some individuals.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Use water spray to keep fire-exposed containers cool.
Containers may explode in the heat of a fire. This chemical poses an
explosion hazard. May form explosive peroxides. Vapors may be
heavier than air. They can spread along the ground and collect in
low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Scoop up with a nonsparking tool,
then place into a suitable container for disposal. Remove all
sources of ignition. Provide ventilation. Clean up residual material
by washing area with a 2-5% solution of soda ash.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Use spark-proof
tools and explosion proof equipment. Avoid contact with eyes, skin,
and clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep from contact with oxidizing materials. Store in a
cool, dry, well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 31431-13-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A NIOSH/MSHA approved or European Standard EN 149 air
purifying respirator with an organic vapor cartridge
or canister may be permissible under certain
circumstances where airborne concentrations are
expected. A respiratory protection program that meets
OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or
European Standard EN 149 must be followed whenever
workplace conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: characteristic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 125-127 deg C @ 8 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H11FO
Molecular Weight: 178.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. This material may be
sensitive to peroxide formation.
Conditions to Avoid:
Excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 31431-13-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cyclobutyl-4-fluorophenyl ketone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 31431-13-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 31431-13-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 31431-13-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/13/1999 Revision #2 Date: 5/15/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propargyl bromide, 80 wt% solution in toluene, stabilized 106-96-7
Carbowax PEG 8000 25322-68-3
1-Bromopentane, 98% 110-53-2
Hydrindantin dihydrate, 96% 5950-69-6
Benzylacetone, 98% 2550-26-7
2-Amino-5-Chlorobenzophenone Oxime, Mixture of Syn and Anti Isomers 18097-52-4
Trimethylacetaldehyde 630-18-2
Polyvinyl Alcohol 9002-89-5
Tetraphenyltin, 97% 595-90-4
Potassium Metal 7440-09-7
1-Chloro-2-Fluorobenzene, 99% 348-51-6
Potassium Acetate 127-08-2
5-Fluorocytosine, 99+% 2022-85-7
Trichloroisocyanuric Acid, 99% (Titr.) 87-90-1
Potassium Bitartrate 868-14-4
Solketal, 97+%(GC) 100-79-8
Aluminum Potassium Sulfate Dodecahydrate 7784-24-9
1,4-Naphthoquinone-2-Sulfonic Acid, Potassium Salt 34169-62-5
1,2,3,4-Tetrahydro-1-Naphthylamine 2217-40-5
12-Crown-4, 97+% 294-93-9
Dimethyl Nitroterephthalate, 99% 5292-45-5
3-Nitrobenzamide, 98% 645-09-0
3-Pyridinesulfonic acid, 98% (titr.) 636-73-7
2-Methyltetrahydrofuran 99+% stabilized with 1% Butylated 96-47-9
Potassium Bicarbonate 298-14-6
Cyclobutyl-4-fluorophenyl ketone, 98% 31431-13-7
1-Triphenylphosphoranylidene-2-Propanone, 99% 1439-36-7
Methyl 3,5-Dimethoxy-4-Hydroxybenzoate, 98% 884-35-5
2-Amino-5-Iodobenzoic Acid, 99% 5326-47-6
5-Bromo-2-Chlorobenzoic Acid, 98% 21739-92-4
Potassium Bromide 7758-02-3
2-Acetylbenzoic acid, 99% 577-56-0
Potassium carbonate anhydrous 584-08-7
Potassium chlorate 3811-04-9
2-Bromohexadecanoic acid, 98%. 18263-25-7
Diphenylmercury 587-85-9
Potassium chloride 7447-40-7
2-(Tert-Butylamino)ethanol, 99+% 4620-70-6
Potassium chromate 7789-00-6
Potassium Citrate Monohydrate 6100-05-6
2-Methoxybenzyl alcohol, 99% 612-16-8
Chromium (III) Potassium Sulfate Dodecahydrate 7788-99-0
Potassium Cyanide 151-50-8
Oxalyl chloride, 98% 79-37-8
Amberlyst 15(wet) ion-exchange resin 9037-24-5
Potassium dichromate 7778-50-9
Potassium ferricyanide 13746-66-2
Potassium Ferrocyanide Trihydrate 14459-95-1: Oral, rat
3-Sulfobenzoic Acid Disodium Salt Mono- Hydrate 14995-40-5
Methylene Blue 61-73-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net