Search   
MSDS 
:
 1-Chloro-2-Fluorobenzene, 99%
CAS 
:
 348-51-6
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 348-51-6 |1-Chloro-2-Fluorobenzene | 99% | 206-476-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 10 11 20

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Highly flammable. Harmful by inhalation.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause cardiac disturbances. Ingestion of large amounts
may cause CNS depression.
Inhalation:
May cause respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May cause
cardiac abnormalities. Inhalation at high concentrations may cause
CNS depression and asphixiation. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution. Runoff to sewer may create fire
or explosion hazard.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 348-51-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 137 - 138 deg C @ 760.00mmHg
Freezing/Melting Point: -42.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: 18 deg C ( 64.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.2440g/cm3
Molecular Formula: C6H4ClF
Molecular Weight: 130.55

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 348-51-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Chloro-2-Fluorobenzene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 10 Flammable.
R 11 Highly flammable.
R 20 Harmful by inhalation.
Safety Phrases:
S 7 Keep container tightly closed.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 348-51-6: No information available.
Canada
CAS# 348-51-6 is listed on Canada's NDSL List.
CAS# 348-51-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 348-51-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propargyl bromide, 80 wt% solution in toluene, stabilized 106-96-7
Carbowax PEG 8000 25322-68-3
1-Bromopentane, 98% 110-53-2
Hydrindantin dihydrate, 96% 5950-69-6
Benzylacetone, 98% 2550-26-7
2-Amino-5-Chlorobenzophenone Oxime, Mixture of Syn and Anti Isomers 18097-52-4
Trimethylacetaldehyde 630-18-2
Polyvinyl Alcohol 9002-89-5
Tetraphenyltin, 97% 595-90-4
Potassium Metal 7440-09-7
1-Chloro-2-Fluorobenzene, 99% 348-51-6
Potassium Acetate 127-08-2
5-Fluorocytosine, 99+% 2022-85-7
Trichloroisocyanuric Acid, 99% (Titr.) 87-90-1
Potassium Bitartrate 868-14-4
Solketal, 97+%(GC) 100-79-8
Aluminum Potassium Sulfate Dodecahydrate 7784-24-9
1,4-Naphthoquinone-2-Sulfonic Acid, Potassium Salt 34169-62-5
1,2,3,4-Tetrahydro-1-Naphthylamine 2217-40-5
12-Crown-4, 97+% 294-93-9
Dimethyl Nitroterephthalate, 99% 5292-45-5
3-Nitrobenzamide, 98% 645-09-0
3-Pyridinesulfonic acid, 98% (titr.) 636-73-7
2-Methyltetrahydrofuran 99+% stabilized with 1% Butylated 96-47-9
Potassium Bicarbonate 298-14-6
Cyclobutyl-4-fluorophenyl ketone, 98% 31431-13-7
1-Triphenylphosphoranylidene-2-Propanone, 99% 1439-36-7
Methyl 3,5-Dimethoxy-4-Hydroxybenzoate, 98% 884-35-5
2-Amino-5-Iodobenzoic Acid, 99% 5326-47-6
5-Bromo-2-Chlorobenzoic Acid, 98% 21739-92-4
Potassium Bromide 7758-02-3
2-Acetylbenzoic acid, 99% 577-56-0
Potassium carbonate anhydrous 584-08-7
Potassium chlorate 3811-04-9
2-Bromohexadecanoic acid, 98%. 18263-25-7
Diphenylmercury 587-85-9
Potassium chloride 7447-40-7
2-(Tert-Butylamino)ethanol, 99+% 4620-70-6
Potassium chromate 7789-00-6
Potassium Citrate Monohydrate 6100-05-6
2-Methoxybenzyl alcohol, 99% 612-16-8
Chromium (III) Potassium Sulfate Dodecahydrate 7788-99-0
Potassium Cyanide 151-50-8
Oxalyl chloride, 98% 79-37-8
Amberlyst 15(wet) ion-exchange resin 9037-24-5
Potassium dichromate 7778-50-9
Potassium ferricyanide 13746-66-2
Potassium Ferrocyanide Trihydrate 14459-95-1: Oral, rat
3-Sulfobenzoic Acid Disodium Salt Mono- Hydrate 14995-40-5
Methylene Blue 61-73-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net