Search   
MSDS 
:
 Methyl trifluoroacetate, 99%
CAS 
:
 431-47-0
SYNONYMS 
:
 Acetate, trifluoro-, methyl; Acetic acid, trifluoro-, methyl ester
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 431-47-0 |Methyl trifluoroacetate | 99 | 207-074-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+ F
Risk Phrases: 11 28

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Very toxic if swallowed.Lachrymator (substance
which increases the flow of tears).The toxicological properties of
this material have not been fully investigated.

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause chemical
conjunctivitis and corneal damage.
Skin:
Causes skin irritation. May cause dermatitis. May cause cyanosis of
the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Aspiration may lead to pulmonary edema. Vapors may
cause dizziness or suffocation. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Extremely flammable liquid and vapor. Containers
may explode in the heat of a fire. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use water spray, dry chemical, carbon dioxide, or
chemical foam. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. A vapor suppressing foam
may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Do not
get in eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Do not ingest or inhale. Use only in a
chemical fume hood. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Poison room locked/refrigerator. Refrigerator/flammables.
Store in a cool, dry area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 431-47-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: ester-like
pH: Not available.
Vapor Pressure: 5.77 psi @ 20 deg C
Viscosity: 0.36 cSt 20 deg C
Boiling Point: 43 - 43.5 deg C
Freezing/Melting Point: -78 deg C
Autoignition Temperature: Not applicable.
Flash Point: -7 deg C ( 19.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: 8 g/l water
Specific Gravity/Density: 1.2730g/cm3
Molecular Formula: CF3CO2CH3
Molecular Weight: 128.05

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 431-47-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl trifluoroacetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.*
Hazard Class: 3 (6.1)
UN Number: 1992
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3.2 (6.1)
UN Number: 1992
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3
UN Number: 1992
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+ F
Risk Phrases:
R 11 Highly flammable.
R 28 Very toxic if swallowed.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 20 When using do not eat or drink.
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 431-47-0: No information available.
Canada
CAS# 431-47-0 is listed on Canada's NDSL List.
CAS# 431-47-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 431-47-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Chlorzoxazone, 98% 95-25-0
4-Amino-6-Hydroxy-2-Mercaptopyrimidine Monohydrate, 98% 65802-56-4
Methyl trifluoroacetate, 99% 431-47-0
Rescinnamine, 98.0 - 101.0% 24815-24-5
3-Hydroxypropionitrile, P.A. 109-78-4
Dl-m-tyrosine, 98.5% 775-06-4
Benzyl Isocyanate, 98% 3173-56-6
d-(-)-Erythrose, 85% 583-50-6
6,7-Dimethoxy-1,2,3,4-tetrahydroisoquinoli ne hydrochloride, 98% 2328-12-3
2,3,4,5,6-Pentafluorobenzyl alcohol, 96-98% 440-60-8
2-Ethylhexanoic acid, p.a. 149-57-5
L-2-Pyrrolidone-5-carboxylic acid, 98% 98-79-3
Tetramethylammonium perchlorate 2537-36-2
5-Iodovanillin, 97% 5438-36-8
(-)-Myrtenol, 97+% 515-00-4
p-Toluamide 619-55-6
7-??(Chlorocarbonyl)methoxy??-4-Methylcoumarin 91454-65-8
Methyl 3,5-dihydroxybenzoate, 97% 2150-44-9
Aluminum fluoride trihydrate, 97% 15098-87-0
Boc-L-Arginine, 99+% 13726-76-6
2-Mesitylenesulfonic acid dihydrate, 97% 3453-83-6
2-Bromo-2',4'-Dimethoxyacetophenone, 98% 60965-26-6
Pentamethylbenzyl Chloride, 97% (Titr.) 484-65-1
cis-1,4-Dichloro-2-butene, 95% 1476-11-5
Aniline hydrochloride, 99% 142-04-1
Ammonium Perchlorate, 99.8% 7790-98-9
Poly(N,N-dimethyl-3,5-dimethylene-piperidinium chloride) 20 wt.% 7732-18-5
Samarium atomic absorption standard solution, 1 mg/ml Sm in 2% HNO3 7440-19-9
3-Chloro-5-Methoxyphenol, 99% 65262-96-6
Ethyl 2-furoate, 99% 614-99-3
Cresol Red, Water Soluble, Indicator Grade 62625-29-0
L-Buthionine-S,R-Sulfoximine, 99% 83730-53-4
gamma-Butyrolactone, 99+% 96-48-0
Ethoxyamine Hydrochloride, 99+% (Titr.) 3332-29-4
2-Tert-Butylcyclohexanol, Mixture of Isomers, 99% 13491-79-7
L-(+)-Glutamic Acid Hydrochloride, 99% 138-15-8
Bis(trimethylsilyl)sulfate, 98% 18306-29-1
Alpha-Methyl-Alpha-Propylsuccinimide 99+% 1497-19-4
3-Bromopyridine, 99% 626-55-1
3-Nitrosalicylaldehyde, 98% 5274-70-4
5-Hydroxydopamine Hydrochloride, 99% 5720-26-3
n,n-bis(Trimethylsilyl)acetamide 10416-58-7
1,4-Diphenyl-1,3-butadiene, scintillation grade 886-65-7
Benzyl Chloride 100-44-7
2-Methyl-5-Nitroindole, 95+% 7570-47-0
2,5-Dimethyl-1H-benzimidazole, 99% 1792-41-2
2,4-Dimethoxybenzylamine Hydrochloride, 97% 20781-21-9
3',4'-(Didecyloxy)Acetophenone, 98% 118468-33-0
(R)-Styrene Oxide, 99% 20780-53-4
Metrizamide p.a. 31112-62-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net