Search   
MSDS 
:
 Octafluorotoluene, 98%
CAS 
:
 434-64-0
SYNONYMS 
:
 Perfluorotoluene; Benzene, pentafluoro(trifluoromethyl)-; Toluene,     octafluoro-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 434-64-0 |Octafluorotoluene | 98 | 207-104-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause dermatitis. May cause cyanosis of
the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. A vapor suppressing foam
may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Ground and
bond containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Do not ingest or inhale. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 434-64-0:

Russia: 5 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 104 deg C @ 760.00mm Hg
Freezing/Melting Point: -65.6 deg C
Autoignition Temperature: Not applicable.
Flash Point: 20 deg C ( 68.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.6660g/cm3
Molecular Formula: C7F8
Molecular Weight: 236.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 434-64-0: XT3530000
LD50/LC50:
CAS# 434-64-0: Inhalation, mouse: LC50 = 1250 mg/m3/2H; Inhalation,
rat: LC50 = 1141 ppm/1H; Inhalation, rat: LC50 = 2700 mg/m3/4H;
Oral, mouse: LD50 = 600 mg/kg; Oral, rat: LD50 = 1000 mg/kg.
Inhalation, Rat: LD50 = 1141
Carcinogenicity:
Octafluorotoluene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 434-64-0: No information available.
Canada
CAS# 434-64-0 is listed on Canada's NDSL List.
CAS# 434-64-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 434-64-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2',4'-Dimethylacetoacetanilide 97-36-9
2,5-Dihydroxybenzoic Acid, 99% 490-79-9
Mandelonitrile, tech. 532-28-5
N-Acetylsulfanilyl Chloride, 99%(Titr.) 121-60-8
DL-Amethopterin hydrate 60388-53-6
D-Ethionine, 98% 535-32-0
Boron trichloride, 1M solution in methylene chloride 75-09-2
2,4,4-Trimethyl-2-Oxazoline, 99% 1772-43-6
4-Nitrophenyl Isothiocyanate 2131-61-5
Norephedrine Hydrochloride, 98% (Titr.) 3195-78-6
Diethyl phenylphosphonite, 99% 1638-86-4
2,3-Dichlorobutane, 98% 7581-97-7
1,1-Diphenylethylene, 99% (GC) 530-48-3
2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate, stab. w/ 92-84-2
1-Hydroxybenzotriazole, 98% 2592-95-2
3',4'-Dimethylacetophenone, 97% 3637-01-2
4-Chloro-alpha-methylbenzylamine, 97% 6299-02-1
4-Phenylazophenol, 97% (UV-Vis) 1689-82-3
Diethyl oxalate, 99% 95-92-1
l-Lysine dihydrochloride, 99% 657-26-1
2-Iodobenzoyl Chloride, 98+% 609-67-6
2-Chloronicotinamide, 98% 10366-35-5
2-Thenylmercaptan, 98% 6258-63-5
2-??4-(4-dimethylaminophenyl)-1,3- butadienyl??-3-ethylbenzothiazolium 114720-33-1
3-Chloro-2-methylpropionitrile, tech., 85+% 7659-45-2
Sodium Deuteroxide (30 wt. % Solution in D2O), 99+ Atom % D 7732-18-5
Succinyl chloride, ca 95 % 543-20-4
2-Chloro-4-fluorobenzyl chloride, 98% 93286-22-7
1-(2,4-Dichlorophenyl)-1-Propanone 95% 37885-41-9
3-Ethoxyphenol, 98% (gc) 621-34-1
Rhodium on alumina powder (5% rh)
Dibutyltin bis(2-ethylhexanoate) 2781-10-4
2,4-Diamino-6-phenyl-s-triazine, 99+% (titr.) 91-76-9
Ethyl Methylcarbamate, 99% (GC) 105-40-8
(4-Aminophenyl)trimethylammonium iodide hydrochloride, 94% 62654-12-0
2,2,5,5-Tetramethyl-3-Pyrrolidine- Carboxamide 702-96-5
Celestine blue 1562-90-9
1-(2-Furyl)-1,3-butanedione 25790-35-6
N-alpha-Benzoyl-dl-arginine-p-nitroanilide hydrochloride, 99+% 911-77-3
Hydroxy Naphthol Blue, Disodium Salt, P.A. 29114-66-7
Linoleic acid (techn), 60% (gc) 60-33-3
Octafluorotoluene, 98% 434-64-0
Cacodylic acid sodium salt, trihydrate 124-65-2
2-Methoxyethyl Acetoacetate, 97% 22502-03-0
2-(2-Thienyl)pyridine, 97+% 3319-99-1
Naphthol green b 19381-50-1
2,4,5-Trimethyloxazole, 95% 20662-84-4
P-Arsanilic Acid, 99% (UV-Vis) 98-50-0
(S)-(+)-10-Methyl-1(9)-Octal-2-One,98.5% 4087-39-2
Indole-3-pyruvic acid , 97% 392-12-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net