Search   
MSDS 
:
 N-Heptadecanoic Acid
CAS 
:
 506-12-7
SYNONYMS 
:
 Margaric acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 506-12-7 |N-Heptadecanoic Acid | 95+ | 208-027-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 506-12-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: almost white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 364 deg C @ 760.00mmHg
Freezing/Melting Point: 59.00 - 61.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C17H34O2
Molecular Weight: 270.44

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 506-12-7: MI3850000
LD50/LC50:
Not available.
Carcinogenicity:
N-Heptadecanoic Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 506-12-7: 2
Canada
CAS# 506-12-7 is listed on Canada's DSL List.
CAS# 506-12-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 506-12-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/24/1998 Revision #4 Date: 5/10/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Iodine solution, 1% w/v in potassium iodide 7553-56-2
Mercury Standard Metal Solution 7439-97-6
Anion eluent concentrates (0.00075M-0.003M NaHCO3 / 0.0022M-0.0024M 144-55-8
Manganese Standard metal Solution 7439-96-5
Diaminoethane tetra-acetic acid disodium salt solutions (0.01M / 139-33-3
Aqueous Potassium Hydroxide Solutions 1310-58-3
Manganese standard metal solution in approx. M nitric acid 7439-96-5
Magnesium standard metal solution 1000 ppm in approx. M nitric acid 7439-95-4
Magnesium standard metal solution 10,000 ppm in approx. M nitric acid 7439-95-4
Lithium standard metal solution in approx. M nitric acid 7439-93-2
Iron standard metal solution 10000 ug/g in approx. M nitric acid 7439-89-6
Iron atomic absorption solution 1000 ug/g in approx. M nitric acid 7439-89-6
N,O-Bis(trimethylsilyl)hydroxylamine, 97%
Gold Standard Metal Solution 7647-01-0
Copper standard metal solution 1000 ppm in approx. M nitric acid 7440-50-8
Copper standard metal solution 10,000 ppm in approx. M nitric acid 7440-50-8
Cobalt standard metal solution 1000 ppm in approx. M nitric acid 7440-48-4
Nitric acid solution, 5 - 20% 7697-37-2
Cobalt standard metal solution 10,000 ppm in approx. M nitric acid 7440-48-4
Chromium Standard Metal Solution 1000 PPM 7440-47-3
Chromium Standard Metal Solution 10,000 PPM 7440-47-3
Perchloric acid, 0.1M in acetic acid 64-19-7
Phenol disulfonic acid solution 96-77-5
Boron Standard Metal Solution 7697-32-7
Calcium standard metal solution in approx. M nitric acid 7440-70-2
D (+) Melibiose Monohydrate 66009-10-7
N-Methyl-bis-trifluoroacetamide 685-27-8
N-Heptadecanoic Acid 506-12-7
Barium chloride solution, 1M 7732-18-5
Bicarbonate indicator solution 76-61-9
Ammonia-Ammonium Chloride Buffer Solution 7664-41-7
2,4,6-Trichlorophenylhydrazine, 98% (Titr.) 5329-12-4
Cadmium standard metal solution 1000 ppm 7440-43-9
Cadmium standard metal solution 10,000 ppm in approx. M nitric acid 7440-43-9
(5S)-5,6-Isopropylidenedioxy-6-Methyl-Heptan-2-One, 99% 61262-94-0
Barium standard metal solution in nitric acid 7440-39-3
Arsenic Standard Metal Solution 1327-53-3
Antimony Standard Metal Solution 7647-01-0
Aluminium standard metal solution 1000 ppm in nitric acid 7429-90-5
N-Methyl-N-(trimethylsilyl)trifluoroacetamide, 97% 24589-78-4
Aluminium standard metal solution 10,000 ppm in nitric acid 7429-90-5
Lead (IV) Tetra-Acetate (Packed under Glacial Acetic Acid) 546-67-8
Sulfuric Acid Volumetric Solution 7664-93-9
Sulfuric acid volumetric solutions 0.1M 7664-93-9
Sulfuric Acid Volumetric Solutions 0.05 M 7664-93-9
Ficodox COD Reagent 7664-93-9
Potassium Pyrogallate Solution 87-66-1
Silver Nitrate Solution 0.1M 7732-18-5
tert-Butyl carbazate, 97% 870-46-2
Orotic acid hydrate, 98% 50887-69-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net