Search   
MSDS 
:
 3-Pyridinesulfonic acid, 98% (titr.)
CAS 
:
 636-73-7
SYNONYMS 
:
 3-Pyridylsulfonic acid; beta-Sulfopyridine; 3-Sulfopyridine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 636-73-7 |3-Pyridinesulfonic acid (HPLC) | 98 | 211-265-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Light sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. Ingestion of large amounts may cause CNS depression.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Inhalation may be fatal as
a result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema. Vapors may cause dizziness
or suffocation. May cause burning sensation, coughing, wheezing,
laryngitis, shortness of breath, headache, nausea, and vomiting.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting and seek IMMEDIATE MEDICAL
ADVICE.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. In case of fire, use water, dry chemical,
chemical foam, or alcohol-resistant foam. Use water spray to cool
fire-exposed containers. Water may be ineffective. Do NOT use
straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Remove all sources of ignition. Use a
spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Use spark-proof tools and explosion proof equipment. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat,
sparks and flame. Do not get on skin or in eyes. Do not ingest or
inhale. Store protected from light. Discard contaminated shoes. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 636-73-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 66 deg C (> 150.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: C5H5NO3S
Molecular Weight: 159.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Light sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, excess light.
Incompatibilities with Other Materials:
Acids, bases, oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 636-73-7: UT7920000
LD50/LC50:
Not available.
Carcinogenicity:
3-Pyridinesulfonic acid (HPLC) -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 636-73-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 636-73-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 636-73-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Propargyl bromide, 80 wt% solution in toluene, stabilized 106-96-7
Carbowax PEG 8000 25322-68-3
1-Bromopentane, 98% 110-53-2
Hydrindantin dihydrate, 96% 5950-69-6
Benzylacetone, 98% 2550-26-7
2-Amino-5-Chlorobenzophenone Oxime, Mixture of Syn and Anti Isomers 18097-52-4
Trimethylacetaldehyde 630-18-2
Polyvinyl Alcohol 9002-89-5
Tetraphenyltin, 97% 595-90-4
Potassium Metal 7440-09-7
1-Chloro-2-Fluorobenzene, 99% 348-51-6
Potassium Acetate 127-08-2
5-Fluorocytosine, 99+% 2022-85-7
Trichloroisocyanuric Acid, 99% (Titr.) 87-90-1
Potassium Bitartrate 868-14-4
Solketal, 97+%(GC) 100-79-8
Aluminum Potassium Sulfate Dodecahydrate 7784-24-9
1,4-Naphthoquinone-2-Sulfonic Acid, Potassium Salt 34169-62-5
1,2,3,4-Tetrahydro-1-Naphthylamine 2217-40-5
12-Crown-4, 97+% 294-93-9
Dimethyl Nitroterephthalate, 99% 5292-45-5
3-Nitrobenzamide, 98% 645-09-0
3-Pyridinesulfonic acid, 98% (titr.) 636-73-7
2-Methyltetrahydrofuran 99+% stabilized with 1% Butylated 96-47-9
Potassium Bicarbonate 298-14-6
Cyclobutyl-4-fluorophenyl ketone, 98% 31431-13-7
1-Triphenylphosphoranylidene-2-Propanone, 99% 1439-36-7
Methyl 3,5-Dimethoxy-4-Hydroxybenzoate, 98% 884-35-5
2-Amino-5-Iodobenzoic Acid, 99% 5326-47-6
5-Bromo-2-Chlorobenzoic Acid, 98% 21739-92-4
Potassium Bromide 7758-02-3
2-Acetylbenzoic acid, 99% 577-56-0
Potassium carbonate anhydrous 584-08-7
Potassium chlorate 3811-04-9
2-Bromohexadecanoic acid, 98%. 18263-25-7
Diphenylmercury 587-85-9
Potassium chloride 7447-40-7
2-(Tert-Butylamino)ethanol, 99+% 4620-70-6
Potassium chromate 7789-00-6
Potassium Citrate Monohydrate 6100-05-6
2-Methoxybenzyl alcohol, 99% 612-16-8
Chromium (III) Potassium Sulfate Dodecahydrate 7788-99-0
Potassium Cyanide 151-50-8
Oxalyl chloride, 98% 79-37-8
Amberlyst 15(wet) ion-exchange resin 9037-24-5
Potassium dichromate 7778-50-9
Potassium ferricyanide 13746-66-2
Potassium Ferrocyanide Trihydrate 14459-95-1: Oral, rat
3-Sulfobenzoic Acid Disodium Salt Mono- Hydrate 14995-40-5
Methylene Blue 61-73-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net