Search   
MSDS 
:
 N-(2-Chloroethyl)pyrrolidine hydrochloride, 98%
CAS 
:
 7250-67-1
SYNONYMS 
:
 None Known.
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ N-(2-Chloroethyl)pyrrolidine hydrochloride, 98% 7250-67-1 ]
Suppliers:   
Not Available
Buyers:  
Not Available
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7250-67-1 |N-(2-Chloroethyl)pyrrolidine hydrochlo| 98% | 230-660-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed. Irritating to eyes,
respiratory system and skin.Hygroscopic (absorbs moisture from the
air).

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use
with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7250-67-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white to off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 171 - 175 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C6H12ClN.HCl
Molecular Weight: 170.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Hygroscopic: absorbs
moisture or water from the air.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, nitrogen oxides, carbon monoxide, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7250-67-1: UY0703150
LD50/LC50:
Not available.
Carcinogenicity:
N-(2-Chloroethyl)pyrrolidine hydrochloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 7250-67-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7250-67-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7250-67-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #1 Date: 1/31/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl 2-isocyano-3-methylpentanoate, 96% 0-01-1
4-Bromobenzonitrile, 98% 623-00-7
Methyl 3,4,5-Trihydroxybenzoate, 99 % 99-24-1
3-Hydroxy-2-nitropyridine, 97% 15128-82-2
Methyl 2-isocyano-3-methylbutyrate, 96% 40846-66-0
Methyl 3-isocyanopropionate, 96% 0-01-1
Methyl 2-isocyanopropionate, 96% 33115-74-1
1-Isocyano-3-isopropoxypropane, 96% 602262-07-7
1,1,3,3-Tetramethylbutyl isocyanide 14542-93-9
2,3-Dihydro-6-isocyano-1,4-benzodioxine, 95% 174092-82-1
Butyl Lactate, 99% (GC) 138-22-7
Dimethyl-d6 sulfate, 99+ atom % d 15199-43-6
Cyclopentyl isocyanide, 96% 68498-54-4
2-Cyclohexen-1-ylethyl isocyanide, 96% 172223-58-4
Diphenylmethyl isocyanide, 96% 3128-85-6
Methyl 2-isocyano-3-phenylpropionate, 96% 63157-14-2
alpha-Methylbenzyl isocyanide, 96% 17329-20-3
4-Fluorophenyl isocyanide, 95% 24075-34-1
3-Phenylpropyl isocyanide, 96% 111944-21-9
Phenylethyl isocyanide, 96% 59795-89-0
Benzo[a]pyrene, 96.5% 50-32-8
1-(Trifluoroacetyl)imidazole, 95% 1546-79-8
Ethylurea, 97% 625-52-5
1-Naphthalenemethanol, 98% 4780-79-4
Trimethylaluminum, 1,0M solution in heptane 75-24-1
Triisobutylaluminium, 1.1M solution in toluene 100-99-2
Ethylmagnesium chloride, 2.0M solution in THF 109-99-9
Triethylaluminium, 1,3M solution in heptane 97-93-8
Diethylzinc, 1,5M solution in toluene 108-88-3
Sodium thiophosphate hydrate 10489-48-2
cis-2,6-Dimethylmorpholine, 97% 6485-55-8
N-(2-Chloroethyl)pyrrolidine hydrochloride, 98% 7250-67-1
MP Alumina R, ICN material 1344-28-1
Tributylborane, 98% 122-56-5
L(-)-10-Camphorsulfonyl chloride 39262-22-1
Sodium cyanoborohydride, solution in THF 109-99-9
1-Phenyl-2-propanol, 99% 14898-87-4
N-(4-Dimethylamino-3,5-dinitrophenyl)maleimide 3475-74-9
8-Chloro-1-octanol, 98% 23144-52-7
1,10-Diamino-4,7-dioxadecane 2997-01-5
(4-Methoxybenzylidene)malonitrile, 98% 2826-26-8
1-(2-Hydroxyphenyl)piperazine, 98% 1011-17-2
5-Bromo-2-methylaniline, 98% 39478-78-9
1-Iodo-3-methylbutane, stabilized, 98% 541-28-6
2,4,6-Trivinylcyclotriboroxane-pyridine complex 92988-08-4
2-Methyl-5-nitroanisole, 99% 13120-77-9
Methyl 3-benzoylpropionate, 97% 25333-24-8
Ethyl 3-methylbenzoate, 98% 120-33-2
3,4-Dichlorostyrene, stabilized, 95% 2039-83-0
Dihydroquinine hydrobromide hydrate 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com