Search   
MSDS 
:
 Sulfuric acid 90-98%
CAS 
:
 7664-93-9
SYNONYMS 
:
 Hydrogen sulfate; Oil of vitriol; Vitriol brown oil; Mattling acid;     Battery acid; Sulphuric acid; Electrolyte acid; Dihydrogen sulfate;     Spirit of sulfur; Chamber acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7664-93-9 |Sulfuric acid | 90-98 | 231-639-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes severe burns.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes severe eye burns. May cause irreversible eye injury. May
cause blindness. May cause permanent corneal opacification. The
severity of injury depends on the concentration of the solution and
the duration of exposure.
Skin:
Causes skin burns. The severity of injury depends on the
concentration of the solution and the duration of exposure.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Because its vapor pressure is negligible, it exists in the air only
as a mist or spray. Exposure may impair lung function and cause
mucostasis (reduced mucous clearance).
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Prolonged
or repeated inhalation may cause nosebleeds, nasal congestion,
erosion of the teeth, perforation of the nasal septum, chest pain
and bronchitis. Prolonged or repeated eye contact may cause
conjunctivitis. Effects may be delayed. Workers chronically exposed
to sulfuric acid mists may show various lesions of the skin,
tracheobronchitis, stomatitis, conjunctivitis, or gastritis.
Occupational exposure to strong inorganic acid mists containing
sulfuric acid is carcinogenic to humans.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
POISON material. If inhaled, get medical aid immediately. Remove
victim to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Notes to Physician:
Monitor arterial blood gases, chest x-ray, and pulmonary function
tests if respiratory tract irritation or respiratory depression is
evident. Treat dermal irritation or burns with standard topical
therapy. Effects may be delayed. Do NOT use sodium bicarbonate in an
attempt to neutralize the acid.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Substance is noncombustible. Contact with water can cause
violent liberation of heat and splattering of the material. Contact
with metals may evolve flammable hydrogen gas. Runoff from fire
control or dilution water may cause pollution. Approach fire from
upwind to avoid hazardous vapors and toxic decomposition products.
Strong dehydrating agent, which may cause ignition of finely divided
materials on contact. Oxides of sulfur may be produced in fire.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Do NOT get water inside containers. If water is used, care should be
taken, since it can generate heat and cause spattering if applied
directly to sulfuric acid.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Carefully scoop up and place into appropriate
disposal container. Provide ventilation. Do not get water inside
containers. Cover with dry earth, dry sand, or other non-combustible
material followed with plastic sheet to minimize spreading and
contact with water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not allow water to get into the container
because of violent reaction. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Discard contaminated shoes.
Use only with adequate ventilation. Do not breathe spray or mist. Do
not use with metal spatula or other metal items. Inform laundry
personnel of contaminant's hazards.
Storage:
Do not store near combustible materials. Keep container closed when
not in use. Store in a cool, dry, well-ventilated area away from
incompatible substances. Do not store near alkaline substances. Store
protected from moisture. Ideally, sulfuric acid should be stored in
isolation from all other chemicals in an approved acid or corrosives
safety cabinet.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Use a corrosion-resistant ventilation
system.
Exposure Limits
CAS# 7664-93-9:
United States OSHA: 1 mg/m3 TWA
Belgium - TWA: 1 mg/m3 VLE
Belgium - STEL: 3 mg/m3 VLE
France - VME: 1 mg/m3 VME
France - VLE: 3 mg/m3 VLE
Germany: 0.5 mg/m3 TWA (inhalable fraction, battery manufacture,
metal working in a close
Japan: 1 mg/m3 Ceiling
Malaysia: 1 mg/m3 TWA
Netherlands: 1 mg/m3 MAC
Russia: 1 mg/m3 TWA
Spain: 1 mg/m3 VLA-ED
Spain: 3 mg/m3 VLA-EC

Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: oily - clear colorless to yellow
Odor: odorless
pH: 0.3 (1N solution)
Vapor Pressure: < 0.001 mm Hg @ 20 deg C
Viscosity: 21 mPas @ 25 C
Boiling Point: 290-338 deg C
Freezing/Melting Point: 10 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 340 deg C
Solubility in water: Soluble with much heat
Specific Gravity/Density: 1.84
Molecular Formula: H2SO4
Molecular Weight: 98.07

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Sulfuric acid reacts vigorously, violently or explosively with many
organic and inorganic chemicals and with water.
Conditions to Avoid:
Excess heat, exposure to moist air or water, Note: Use great caution
in mixing with water due to heat evolution that causes explosive
spattering. Always add the acid to water, never the reverse..
Incompatibilities with Other Materials:
Metals, oxidizing agents, reducing agents, bases, acrylonitrile,
chlorates, finely powdered metals, nitrates, perchlorates,
permanganates, epichlorohydrin, aniline, carbides, fulminates,
picrates, organic materials, flammable liquids.
Hazardous Decomposition Products:
Oxides of sulfur.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7664-93-9: WS5600000
LD50/LC50:
CAS# 7664-93-9: Draize test, rabbit, eye: 250 ug Severe; Inhalation,
mouse: LC50 = 320 mg/m3/2H; Inhalation, mouse: LC50 = 320 mg/m3;
Inhalation, rat: LC50 = 510 mg/m3/2H; Inhalation, rat: LC50 = 510
mg/m3; Oral, rat: LD50 = 2140 mg/kg.
Not available.
Carcinogenicity:
Sulfuric acid -
ACGIH: A2 - Suspected Human Carcinogen (contained in strong inorg
California: carcinogen, initial date 3/14/03 (listed as Strong inorgan
NTP: Known carcinogen (listed as Strong inorganic acid mists co
IARC: Group 1 carcinogen
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Bluegill/Sunfish: 49 mg/L; 48Hr; TLm (tap water @ 20C)Fish:
Bluegill/Sunfish: 24.5 ppm; 48Hr; TLm (fresh water)

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SULPHURIC ACID
Hazard Class: 8
UN Number: 1830
Packing Group: II
IMO
Shipping Name: SULPHURIC ACID
Hazard Class: 8
UN Number: 1830
Packing Group: II
RID/ADR
Shipping Name: SULPHURIC ACID
Hazard Class: 8
UN Number: 1830
Packing group: II
USA RQ: CAS# 7664-93-9: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 30 Never add water to this product.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7664-93-9: 2
Canada
CAS# 7664-93-9 is listed on Canada's DSL List.
CAS# 7664-93-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7664-93-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/22/1999 Revision #12 Date: 9/05/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sulfamic acid 5329-14-6
3-Chlorocinnamic Acid, Predominantly Trans 99+% 1866-38-2
4-(Bromomethyl)-7-Methoxycoumarin 99% 35231-44-8
2-Hydroxy-3-nitropyridine, 98% 6332-56-5
Sulfanilamide 63-74-1
Sulfanilic acid 121-57-3
Nicotine sulfate, 40% aqueous solution 65-30-5
2-Bromobenzaldehyde, 97% 6630-33-7
Bicyclo (3.2.1)Octan-2-One, 90-95%(GC) 5019-82-9
Benzo??b??naphtho??2,3-d??thiophene, 99.5+% 243-46-9
Triethyl Orthoacetate, 99% (GC) 78-39-7
5-Sulfosalicylic acid dihydrate 97-05-2
4-Benzoyloxy-2-Azetidinone, 99% 28562-58-5
Sulfur (Precipitated and Sublimed) 7704-34-9
N-Methyl-Beta-Alaninenitrile, 98% 693-02-7
Trimethyl Orthovalerate 13820-09-2
Ethyl diethoxyphosphinylformate, 98% 1474-78-8
S-Methyl-L-Cysteine, 99+% 1187-84-4
N-Benzoyl-4-Piperidone, 97% 24686-78-0
Succinimide, 99% 123-56-8
Sulfuric acid 90-98% 7664-93-9
Sulfurous Acid 7782-99-2
Silver trifluoromethanesulfonate, 99+% 2923-28-6
Rhodanine-n-acetic acid, 98% 5718-83-2
Tannic Acid 1401-55-4
Diphenic Anhydride, 98% 6050-13-1
4-(Dimethylamino)butyric Acid Hydrochloride, 98% 69954-66-1
(4S,5S)-4,5-Di(aminomethyl)-2,2-dimethyldioxolane, 99+% 119322-88-2
4-Acryloylamidobenzo-18-Crown-6, 98% 0-00-1
2-Thio-6-hydroxypurine hydrate, 98% 2487-40-3
3-Methyl-4-nitrobenzoic acid, 99% 3113-71-1
L-(+)-Tartaric acid 87-69-4
3-Methyl-2-pyrazolin-5-one, 99% (titr.) 108-26-9
2-Nitronaphthalene, tech., 85% 581-89-5
2,6-Dibromopyridine, 98% 626-05-1
5-Methylfurfural, 98+% 620-02-0
Ammonium orthoarsenate trihydrate, 99.999% 13477-86-6
n-Benzylglycine ethyl ester hydrochloride, 98%
N-Alpha-Acetyl-L-Lysine-N-Methylamide Monohydrate, 99+%, (TLC) 81013-00-5
(+)-Dimethyl L-Tartrate, 99% 608-68-4
2,5-Dibromotoluene, 99% 615-59-8
2-Aminoperimidine, Hydrobromide Sesquihydrate, 98% 40835-96-9
Nucleic Acid (Pract), 90% (UV-VIS) 9008-72-4
Ethyl 3-Endo-Aminobicyclo[2.2.1]Hept-5-ene -2-Endo-Carboxylate 95630-74-3
Cyclopentanemethanol, 96% 3637-61-4
Tetrahexylammonium Bromide, 99% (Titr.) 4328-13-6
1-(4-Chlorophenyl)-1-cyclohexanecarbonitrile
Potassium deuteroxide, 40 wt% solution in d2o, 98+ atom % d 24572-01-8
1-(2-Methoxyphenyl)piperazine, 98+% (GC) 35386-24-4
4-Carboxybenzo-15-Crown-5, 99+% 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net