Search   
MSDS 
:
 Copper (I) Iodide
CAS 
:
 7681-65-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7681-65-4 |Copper (I) Iodide | 100 % | 231-674-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.Light sensitive.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
Dust is irritating to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. May form
very sensitive, explosive metallic compounds.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Minimize dust generation and accumulation.
Avoid contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7681-65-4:
United Kingdom, WEL - TWA: (listed as copper): 0.2 mg/m3 TWA (fum
1 mg/m3 TWA (dust and mist)
United Kingdom, WEL - STEL: (listed as copper): 0.6 mg/m3 STEL
(fume); 2 mg/m3 STEL (dust and mist)
United States OSHA: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and
mists) (listed under Copper).
Belgium - TWA: (listed as copper): 0.2 mg/m3 VLE (fume); 1 mg/m3
(dust and mist)
France - VME: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 V
(dust, as Cu)
France - VLE: (listed as copper): 2 mg/m3 VLE (dust, as Cu)
Germany: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 VME (d
as Cu)
Malaysia: (listed as copper): 0.2 mg/m3 TWA (fume, as Cu); 1 mg/m
TWA (dust and mist, as Cu)
Netherlands: (listed as copper): 0.2 mg/m3 MAC (smoke); 1 mg/m3 M
(dust)
Russia: (listed as copper): 1 mg/m3 TWA (dust)
Russia: (listed as copper): 0.5 mg/m3 STEL (dust)
Spain: (listed as copper): 0.2 mg/m3 VLA-ED (fume); 1 mg/m3 VLA-E
(dust and mist, as Cu)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white to gray-beige
Odor: Not available.
pH: Not available.
Vapor Pressure: 10 mm Hg
Viscosity: Not available.
Boiling Point: 1290 deg C
Freezing/Melting Point: 605 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 5.6200
Molecular Formula: CuI
Molecular Weight: 190.4505

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, light, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents, alkali metals, potassium, acetylene.
Hazardous Decomposition Products:
Hydrogen iodide, iodine.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7681-65-4 unlisted.
LD50/LC50:
Not available.
Oral LD50 (rat): 1600
Carcinogenicity:
Copper (I) Iodide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7681-65-4: 2
Canada
CAS# 7681-65-4 is listed on Canada's DSL List.
CAS# 7681-65-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7681-65-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/07/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Copper (II) Sulfide 1317-40-4
Copper (I) Cyanide 544-92-3
Copper (I) Iodide 7681-65-4
3-Amino-1-Propanol, 99% 156-87-6
Copper (I) Oxide 1317-39-1
Curcumin 458-37-7
Iso-Cyanatobenzene 103-71-9
Cyclohexane-1,2-dione 765-87-7
Cyclohexylamine 108-91-8
p-Cymene 99-87-6
L-Cysteine 52-90-4
L-Cysteine Hydrochloride Monohydrate 52-89-1
5-Fluorouracil, 99% 51-21-8
Poly(Ethyl Methacrylate), Sec. Stand., Aver. M.W.340000, Aver. 9003-42-3
gamma-Cyclodextrin 17465-86-0
Dabsyl Chloride 56512-49-3
Dansyl Aziridine 51908-46-4
Dansyl Hydrazine 33008-06-9
1-Decanesulfonic Acid, Sodium Salt 13419-61-9
N-(P-Aminobenzoyl)-L-Glutamic Acid Diethyl Ester, 99% 13726-52-8
Dextrin 9004-53-9
Diacetyl 431-03-8
1,2-Diaminoethane 16889-59-1
Diaminoethane tetra-Acetic Acid Diammonium Salt 20824-56-0
Diaminoethane tetra-Acetic Acid Dipotassium Salt Dihydrate 2001-94-7
Diaminoethane tetra-Acetic Acid Disodium Salt 139-33-3
Diaminoethane tetraacetic acid, tetrasodium salt tetrahydrate 64-02-8
2,4-Diaminophenol dihydrochloride 137-09-7
Dibenzo-18-crown-6 ether 14187-32-7
1,3-Dibromopropane 109-64-8
2,6-Di-tert-butyl-p-cresol 128-37-0
Di-n-butyl ether 142-96-1
Di-iso-butyl ketone 108-83-8
Dichloroacetic Acid 79-43-6
2,3-Dichloro-5,6-dicyanobenzoquinone 84-58-2
Dichlorofluorescein 76-54-0
1,1-Dichloromethyl Methyl Ether 4885-02-3
2,4-Dichlorophenol 120-83-2
Dicyclohexylamine 101-83-7
Dicyclohexylcarbodi-imide 538-75-0
Diethanolamine 111-42-2
1,1-Diethoxyethane 105-57-7
d-(-)-Lactic acid, lithium salt, 98% 27848-81-3
Diethylammonium Diethyl dithio-Carbamate 1518-58-7
Diethyl Carbonate 105-58-8
Di(2-ethylhexyl)phthalate 117-81-7
Diethyl Malonate 105-53-3
Diethyl oxalate 95-92-1
Diethyl Pyrocarbonate 1609-47-8
Diethyl Sulfate 64-67-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net