Search   
MSDS 
:
 Sulfur
CAS 
:
 7704-34-9
SYNONYMS 
:
 Sulphur; Brimstone.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7704-34-9 |Sulfur | 100 | 231-722-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. Effects may be delayed. Causes redness and
pain. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin irritation. Causes redness and pain.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Olfactory fatigue may occur.
Can produce delayed pulmonary edema. May cause central nervous
system effects such as nausea and headache.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
inhalation may cause effects similar to those of acute inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear. Do
NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Evacuate area and fight fire from a safe distance. As in any fire,
wear a self-contained breathing apparatus in pressure-demand,
MSHA/NIOSH (approved or equivalent), and full protective gear. During
a fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Dust can be an explosion hazard when
exposed to heat or flame. This material in sufficient quantity and
reduced particle size is capable of creating a dust explosion.
Flammable solid. May burn rapidly with flare burning effect. May
re-ignite after fire is extinguished.
Extinguishing Media:
Water spray may cause frothing. For large fires, use water spray,
fog or regular foam. Contact professional fire-fighters immediately.
For small fires, use dry chemical, carbon dioxide, sand, earth, water
spray or regular foam. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Scoop up with a nonsparking tool, then
place into a suitable container for disposal. Avoid generating dusty
conditions. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. May
form flammable dust-air mixtures. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Use with adequate ventilation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 7704-34-9:

Russia: 6 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: rotten egg-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 445 deg C
Freezing/Melting Point: 113 deg C
Autoignition Temperature: 450 deg F ( 232.22 deg C)
Flash Point: 405 deg F ( 207.22 deg C)
Explosion Limits, lower: 3.3%
Explosion Limits, upper: 46.0%
Decomposition Temperature: Not applicable.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 2.07
Molecular Formula: S
Molecular Weight: 32.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, dust
generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7704-34-9: WS4250000
LD50/LC50:
Not available.
Carcinogenicity:
Sulfur -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SULPHUR
Hazard Class: 4.1
UN Number: 1350
Packing Group: III
IMO
Shipping Name: SULPHUR
Hazard Class: 4.1
UN Number: 1350
Packing Group: III
RID/ADR
Shipping Name: SULPHUR
Hazard Class: 4.1
UN Number: 1350
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 7704-34-9: 1
Canada
CAS# 7704-34-9 is listed on Canada's DSL List.
CAS# 7704-34-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7704-34-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1998 Revision #5 Date: 1/13/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl trans-2-hydroxy-1-cyclopentanecarboxylate (>95%)
Sulfur 7704-34-9
Sulfolane 126-33-0
Succinic Anhydride 108-30-5
Styrene, stabilized with 10-15 ppm tert-butylcatechol 98-29-3
(+)-2,3-O-Isopropylidene-L-threitol, 98+% 50622-09-8
Sulfuric acid 20-55% w/v 7664-93-9
Steel Wool
Strontium Carbonate 1633-05-2
Sorbic Acid 110-44-1
Sodium thioglycollate 367-51-1
Sodium Tauroglycocholate 0-00-0
Sodium Starch Glycolate
Sodium Metasilicate 6834-92-0
Sodium Sesquicarbonate Dihydrate 6106-20-3
Tetra-Sodium Pyrophosphate Anhydrous 7722-88-5
Sodium Propionate 137-40-6
Sodium persulfate 7775-27-1
Sodium perborate tetrahydrate 10486-00-7
Sodium selenite 10102-18-8
Sodium Selenate Decahydrate 10102-23-5
Sodium Metavanadate 131718-26-8
Sodium Metaborate Tetrahydrate 15293-77-3
Sodium metasilicate pentahydrate 6834-92-0
Sodium Malonate 141-95-7
Sodium Hypophosphite 7681-53-0
Sodium Hypochlorite Solution 1310-73-2
Sodium Hydrogen Tartrate Monohydrate 526-94-3
Sodium bisulfate 7681-38-1
Sodium Hydrogen Selenite 7782-82-3
Di-Sodium Hydrogen Citrate, Sesquihydrate 6132-05-4
Sodium Sulfite Hydrated 10102-15-5
2-Chloro-4-ethylamino-6-isopropylamino-s-triazine, 98% 1912-24-9
1,5-Diphenyl-1,5-pentanedione, 99% (uv-vis) 6263-83-8
Disodium hydrogen orthophosphate dihydrate 7558-79-4
Sodium b-Glycerophosphate Hydrate 1300-25-0
Sodium Gluconate 527-07-1
N,n,n',n'-Tetramethyldiaminomethane, 99% 51-80-9
Sodium Formaldehyde Sulfoxylate 149-44-0
Sodium Fluorosilicate 16893-85-9
Sodium Fluoroborate 13755-29-8
Sodium Hexacyanoferrate (II) Decahydrate 59299-99-9
Sodium Dithionite 7775-14-6
Sodium Cacodylate 124-65-2
Sodium Bismuthate 12232-99-4
Sodium Arsenate,Hydrated 10048-95-0
Sodium Aluminate 1302-47-7
Sodium Alginate 9005-38-3
Sodamide 0-00-0
Soda lime granules 2390-59-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net