Search   
MSDS 
:
 Ruthenium atomic absorption standard  solution, 1 mg/ml ru in 10% hcl
CAS 
:
 
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. May cause nausea and vomiting. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear dark deep red-brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Amines, strong bases, metals.
Hazardous Decomposition Products:
Hydrogen chloride.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3264
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Antimony Silicate (Tungsten Doped) 1314-35-8
Beryllium atomic absorption standard solution, 1mg/ml Be in 2% HNO3 7440-41-7
Ammonium Standard, 1000ppm (as N) 7732-18-5
1-Bromopropane, 99% 106-94-5
Thallium Atomic Absorption Standard Solution, 1mg.ml Tl in 2% HNO3 7440-28-0
1,4-Dioxane, Reagent ACS 123-91-1
GASAB 0-01-1
Nicotine Solution, Cigarette 0-01-1
1,6-Heptadien-4-ol, 97% 2883-45-6
Carbol Fuchsin 108-95-2
(S)-2-Amino-3-Methoxypropanoic Acid, 98% 32620-11-4
(R)-(-)-5-Hydroxymethyl-2-Pyrroldinone 66673-40-3
(S)-(+)-5-Triloxymethyl-2-Pyrrolidinone 105526-85-0
N,N-Didecyl-1-Decanamine (Pract) (Isomeric Mixture) 1070-01-5
R-(+)-3-Pyrrolidinol 2799-21-5
Ruthenium atomic absorption standard solution, 1 mg/ml ru in 10% hcl
Isophthalaldehyde, 99% 626-19-7
3-(Methylthio)propionaldehyde, 95% (GC) 3268-49-3
3-Nitropropionic acid, 99% 504-88-1
Chromium standard metal solution in 2% nitric acid 7440-47-3
Cobalt Chloride 7646-79-9
Arsenic standard metal solution, 1000 ppm in 2% HNO3 1327-53-3
n-(3-Bromopropyl)-phthalimide 5460-29-7
2-Hydroxymethyl-1,4-Benzodioxan, 98%(GC) 3663-82-9
Cyclohexanebutyric acid, 99% 4441-63-8
ICP Standard Metal Solution in Hydrochloric Acid 0-00-0
Arsenic standard metal solution, 10000 ppm in 5% HNO3 1327-53-3
2-Methyl-3-Methoxypyrazine, 70-90%, Balance 10-30% 63450-30-6
CRANCO 67-64-1
2,4'-Dibromoacetophenone, 98% 99-73-0
2,3-Diaminopropionic Acid Hydrobromide 98 % 18635-45-5
Matrix 1 7732-18-5
Matrix 2 7664-39-3
Matrix 3 7664-39-3
Beryllium acetate 19049-40-2
Hafnium oxychloride octahydrate 13759-17-6
Ammonium Hexafluorotantalate 33380-11-9
Ammonium Tetraborate 0-01-1
3-Amino-2,4-dimethylpentane, 98+% 4083-57-2
3-Bromo-4-Fluorobenzonitrile, 98% 79630-23-2
Sodium dichromate 10588-01-9
2,4-Dinitrofluorobenzene 70-34-8
Phenylmalonic acid, 99% 2613-89-0
Carbonylbis-(triphenylphosphine)-rhodium (I) chloride 13938-94-8
2,2'-Methylenebisbenzothiazole, 97% 1945-78-4
Chromosulfuric acid 7664-93-9
Lead (II) Hydroxyacetate 0-01-1
Ethyl 3,4,5-Trimethoxybenzoylacetate
Hydrofluoric Acid (Hydrogen Fluoride, liquefied) 7664-39-3
Lactic acid, reagent ACS 50-21-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net