Search   
MSDS 
:
 Methyl 3-Trifluoromethylbenzoylacetate
CAS 
:
 
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| |Methyl 3-Trifluoromethyl Benzoyl Aceta| ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# :
United Kingdom, WEL - TWA: (listed as tellurium): 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as tellurium): 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE
France - VME: (listed as tellurium): 0.1 mg/m3 VME
Germany: (listed as tellurium): 0.1 mg/m3 VME
Malaysia: (listed as tellurium): 0.1 mg/m3 TWA
Netherlands: (listed as tellurium): 0.1 mg/m3 MAC
Russia: (listed as tellurium): 0.01 mg/m3 TWA
Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 94 - 96 deg C @ .20mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 200 deg C (> 392.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: neglegible in water
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 246.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 3-Trifluoromethyl Benzoyl Acetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# : No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/19/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Chloroacetic Acid, P.A. 79-11-8
N-Formyl-3-Methoxy-Morpholine, 95% 61020-09-5
Chloroacetic Acid, Flakes, 99% 79-11-8
Methanesulfonic Acid, Tech., 70% 75-75-2
Formic Acid, Reagent ACS, 96+% (Titr.) 64-18-6
Formic Acid, Reagent ACS, 88+% (Titr.) 64-18-6
Formic Acid, P.A. 64-18-6
Formic Acid, 99% 64-18-6
Hydrochloric Acid 1 N or 1 M Solution 7647-01-0
Hydrochloric Acid, C.P. 7647-01-0
2,3,4,6-Tetra-o-acetyl-alpha-d-glucopyrano syl bromide, 98.5%, 572-09-6
Hydrochloric Acid, Reagent ACS 7647-01-0
Hydrochloric Acid, P.A., Min. 37% 7647-01-0
Inosine 5'-Monophosphate, Disodium Salt Hydrate, 99+% 4691-65-0
Hydrochloric Acid, 0.1N Standard Solution 7647-01-0
Hydrochloric Acid, 1N Standard Solution 7647-01-0
Methyl 3-Trifluoromethylbenzoylacetate
Deuterium Chloride, 20 wt% Solution in D2O 99+ Atom % D 7698-05-7
]1,3-Benzodioxole, 99% 274-09-9
Deuterium Oxide, 100.0 Atom % D 7789-20-0
Deuterium Oxide, 100.0 Atom % D Low in Paramagnetic Impurities 7789-20-0
Octamethyltrisiloxane, 98% 107-51-7
Water, Deuterium-Depleted 7732-18-5
Water for HPLC 7732-18-5
Ammonium Iron (II) Sulfate Hexahydrate, P.A. 7783-85-9
Ammonium Iron (II) Sulfate Hexahydrate, Reagent ACS (Crystals) 7783-85-9
Ammonium iron(iii) sulfate dodecahydrate, p.a. 7783-83-7
Ammonium iron(iii) sulfate dodecahydrate, reagent acs (crystals) 7783-83-7
Methyl Butyrate, 99% (GC) 623-42-7
Diphenylamine, 99% 122-39-4
Hydrochloric Acid 5 to 6N Solution in 2-Propanol 67-63-0
2,3-Benzofluorene, Tech.,90% 243-17-4
Diphenylamine, p.a.; redox-indicator 122-39-4
Silicon (IV) Chloride, 99.8+% 10026-04-7
Diphenylamine, reagent acs 122-39-4
Sodium Hypochlorite (5% Chlorine), Reagent 7681-52-9
Hydrochloric acid, 0.5N solution 7647-01-0
Hydrochloric acid, 2N solution 7647-01-0
Hydrochloric Acid, 1:1 Aqueous Solution 7647-01-0
Ferric Ammonium Sulfate Indicator Solution 7664-93-9
Hexamine Solution 100-97-0
Perchloric Acid, 0.100 N Solution 64-19-7
Phenolphthalein, 0.5% IPA Solution 67-63-0
Test MSDS 67-63-0
This is new.
Hello
fgfghjfgkh 4252-78-2
Sodium hydroxide, purum, pellets 1310-73-2
Sodium hydroxide, pellets, p.a. 1310-73-2
Sodium hydroxide, reagent ACS, pellets, 97+% 1310-73-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net