ROYAL LUBRICANTS COMPANY, INC. -- ROYCO 64 GREASE
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-754-2595
MSDS Num: BYDDC
MSDS NAME: ROYCO 64 GREASE
Responsible Party
Name: ROYAL LUBRICANTS COMPANY, INC.
Address: 72 EAGLE ROCK AVE
Box: 518
City: EAST HANOVER NJ 07936
Info Phone: 201-887-7410
Emergency Phone Number: 201-887-7410
Resp. Party Other MSDS No.: 700,064-2.
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: GREASE,MOLYBDENUM DISULFIDE
Specification Number: MIL-G-21164
Unit of Issue: CN
Quantitative Expression: 20000000175LB
UI Container Qty: G
Type of Container: CAN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Effects of Exposure: EYE CONTACT: MAY BE MILDLY IRRITATING TO THE EYES. SKIN
CONTACT: PROLONGED OR REPEATED CONTACT MAY CAUSE VARIOUS SKIN DISORDERSSUCH
AS DERMATITIS, FOLLICULITIS OR OIL ACNE. RELEASE DURING HIGH PRESSUR E USAGE
MAY RESULT IN INJECTION OF GREASE INTO THE SKIN CAUSING NECROSIS. INHALATION:
NO SPECIFIC INFORMATION IDENTIFIED. INGESTION: NO SPECIFIC INFORMATION
IDENTIFIED.
Signs And Symptions Of Overexposure: IRRITATION AS NOTED ABOVE. LOCAL NECROSIS
IS EVIDENCED BY DELAYED ONSET OF PAIN AND TISSUE DAMAGE A FEW HOURS FOLLOWING
INJECTION. SKIN SENSITIZATION (ALLERGY) MAY BE EVIDENCED BY RASHES,
EXPECIALLY H IVES.
Medical Cond Aggravated By Exposure: PREEXISTING EYE, SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
First Aid: EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN.
GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHES & WIPE EXCESS
OFF. WASH WITH SOAP & WATER. DO NOT REUSE CLOTHING UNTIL THOROU GHLY
CLEANED. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION. IF MATERIAL IS
INJECTED UNDER SKIN, GET MEDICAL ATTENTION PROMPTLY TO PREVENT SERIOUS
DAMAGE; DO NOT WAIT FOR SYMPTOME TO DEVELOP. INHALE D: REMOVE VICTIM TO
FRESH AIR. PROVIDE OXYGEN IF BREATHING DIFFICULT. GET MEDICAL ATTENTION.
INGESTED: DO NOT INDUCE VOMITING. IN GENERAL, NO TREATMENT NEEDED UNLESS
LARGE QUANTITIES INGESTED. GET MEDICAL ADVICE.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE CAUTIOUS
JUDGMENT WHEN CLEANING UP LARGE SPILLS. *LARGE-WEAR RESPIRATOR &
PROTECTIVE CLOTHING AS APPROPIATE. SHUT OFF SOURCE OF LEAK. IF ASFE TO DO SO.
DIK E & CONTAIN. REMOVE WITH VACUUM TRUCKS OR PUMP TO STORAGE/SALVAGE
VESSELS. SOAK UP RESIDUE WITH AN ABSORBENT SUCH AS CLAY, SAND OR OTHER
SUITABLE MATERIAL. DISPOSE OF PROPERLY. FLUSH AREA.
Waste Disposal Methods: PLACE IN AN APPROPIATE DISPOSAL FACILITY IN COMPLIANCE
WITH LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE WITH ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions: NOTE TO PHYSICIAN: IN GENERAL, EMESIS INDUCTION IS
UNNECESSARY IN HIGH VISCOSITY, LOW VOLATILITY PRODUCTS, I.E., MOST OILS AND
GREASES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Lower Limits: N/AV
Upper Limits: N/AV
Extinguishing Media: USE WATER FOG, FOAM, DRY CHEMICAL OR CARBON DIOXIDE. DO
NOT USE A DIRECT STREAM OF WATER. PRODUCT WILL FLOAT & CAN BE REIGNITED
ON SURFACE OF WATER.
Fire Fighting Procedures: MATERIAL WILL NOT BURN UNLESS PREHEATED. DO NOT ENTER
CONFINED FIRE SPACE WITHOUT FULL BUNKER GEAR (HELMET WITH FACE SHIELD, BUNKER
COATS, GLOVES & RUBBER BOOTS), INCLUDING A POSITIVE PRESSURE NIOSH A
PPROVED SELF-CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED CONTAINERS WITH
WATER.
Unusual Fire/Explosion Hazard: SULFUR OXIDES AND HYDROGEN SULFIDE, BOTH OF
WHICH ARE TOXIC, MAY BE RELEASED UPON COMBUSTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE A NIOSH-APPROVED RESPIRATOR AS REQUIRED TO PREVENT
OVEREXPOSURE. IN ACCORD WITH 29 CFR 1910.134, USE EITHER AN
ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AIR-PURIFYING RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation: LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS REQUIRED TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves: WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection: WEAR CHEMICAL GOGGLES IF THERE IS POTENTIAL CONTACT WITH EYES.
Other Protective Equipment: AVOID CONTACT WITH SKIN AND CLOTHING. WEAR
PROTECTIVE CLOTHING.
Work Hygienic Practices: WASH HANDS THOROUGHLY WITH SOAP AND WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. DO NOT GET IN EYES.
Supplemental Safety and Health: CHEMICAL NAME: MIXTURE. CHEMICAL FAMILY:
HYDROCARBON: LUBRICATING GREASE. SYNONYMS: MIL-G-21164.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V6
B.P. Text: N/AV
M.P/F.P Text: N/AV
Decomp Text: UNKNOWN
Vapor Pres: N/AV
Vapor Density: N/AV
Spec Gravity: N/AV
Evaporation Rate & Reference: N/AV
Solubility in Water: N/AV
Appearance and Odor: SMOOTH BUTTERY BLACK GREASE; HYDROCARBON ODOR.
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID HEAT, FLAMES.
Materials To Avoid: CONTACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE, MOLYBDENUM DISULFIDE, OXIDES
OF ANTIMONY, SULFUR, NITROGEN AND OTHER UNIDENTIFIED ORGANIC COMPOUNDS MAY BE
FORMED UPON COMBUSTION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE. WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: OCCUPATIONAL EXPOSURE LIMITS: MOLYBDENUM DISULFIDE-
OSHA PEL/TWA=15 MG/M3, ACGIH TLV/TWA=10 MG/M3 (MOLYBDENUM, INSOLUBLE
COMPOUND, AS MO). ANTIMONY DIALKYLDITHIOCARBAMATE- OSHA PEL/TWA=0.5 MG/M3,
ACGI H TLV/TWA=0.5 MG/M3, OTHER=5 MG/M3 (CALOSHA LIMIT FOR RESPIRABLE DUST),
(NTIMONY COMPOUND, AS SB).
=======================================================
Ecological Information
=======================================================
Ecological: UNDER EPA-CWA, THIS PRODUCT IS CONSIDERED AN OIL UNDER SECTION 311.
SPILLS INTO OR LEADING TO SURFACE WATERS THAT CAUSE A SHEEN MUST BE REPORTED
TO THE NATIONAL RESPONSE CENTER AT 1-800-424-8802.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: DEPARTMENT OF TRANSPORTATION CLASSIFICATION: NOT
HAZARDOUS BY D.O.T. REGULATIONS.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: UNDER SARA TITLE III, SECTION 313, THIS PRODUCT
CONTAINS AN ANTIMONY COMPOUND.
Federal Regulatory Information: THE COMPONENTS OF THIS PRODUCT ARE LISTED ON
THE EPA/TSCA INVENTORY OF CHEMICAL SUBSTANCES.
=======================================================
Other Information
=======================================================
Other Information: HEALTH=1, FIRE=1, REACTIVITY=0. HAZARD RTING: LEAST-0,
SLIGHT-1, MODERATE-2, HIGH-3, EXTREME-4.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 84483
MSDS NAME: ROYCO 64 GREASE
MSDS Prepared Date: 07/23/1997
Review Date: 02/06/1996
Net Unit Weight: 1.75 POUNDS
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: CN
Container QTY: G
Type Of Container: CAN
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ROYCO 64 GREASE
Company: ROYAL LUBRICANTS COMPANY INC.
Street: 215 MERRY LN
PO Box: 518
City: EAST HANOVER NJ
Zipcode: 07936
Health Emergency Phone: 201-887-7410
Label Required IND: Y
Date Of Label Review: 02/06/1996
Status Code: C
MFG Label NO: NONE
Label Date: 02/06/1996
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: STORE IN A COOL, DRY PLACE WITH ADEQUATE VENTILATION.
KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES. FIRST AID: EYES: FLUSH WITH
WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN. GET MEDICAL ATTENTI ON.
SKIN: REMOVE CONTAMINATED CLOTHING.WASH WITH SOAP AND WATER. IF INJECTED
UNDER THE SKIN GET MEDICAL ATTENTION PROMPTLY. INHALATION: REMOVE TO FRESH
AIR. RESTORE BREATHING. GET MEDICAL ATTENTION. I NGESTION: DO NOT INDUCE
VOMITING. IF OCCURS, KEEP HEAD BELOW HIPS. GET MEDICALATTENTION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|