AI TECHNOLOGY INC -- ME8456
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BYVJQ
MSDS NAME: ME8456
Responsible Party
Name: AI TECHNOLOGY INC
Address: 9 PRINCESS RD
City: LAWRENCEVILLE NJ 08648
Info Phone: 609-896-3838
Emergency Phone Number: 609-896-3838
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: A I TECHNOLOGY INC
Address: 70 WASHINGTON RD
City: PRINCETON JUNCTION NJ 08550-1012
Phone: 609-896-3838
Name: AI TECHNOLOGY INC
Address: 9 PRINCESS RD
Box: 3081
City: LAWRENCEVILLE NJ 08648
Phone: 609-896-3838
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50:(ORAL,RAT) >2000 MG/KG.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST:LOW SINGLE DOSE ORAL TOXICITY. EYE CONTACT:MINOR
TRANSIENT IRRITATION. SKIN CONTACT:MINOR TO NO IRRITATION. MAY BE A WEAK
SENSITIZER. SKIN ABSORPTION:NOT ABSORBED IN TOXIC AMOUNTS. INHAL:NOT LI KELY
TO BE A PROBLEM. NO GUIDE FOR CONTROL KNOWN.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: IRRITATION, SENSITIZATION, DERMATITIS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES:FLUSH W/WARM WATER FOR AT LEAST 15 MINUTES; SEE MD. SKIN:WASH
W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR; IF BREATHING IS DIFFICULT,
GIVE OXYGEN. INGEST:IF CONSCIOUS, GIVE WATER, INDUCE VOMITING. GET MEDICAL
ATTENTION IMMEDIATELY. NOTETO MD:NO SPECIFIC ANTIDOTE KNOWN. TREAT
SYMPTOMATICALLY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: USE APPROPRIATE EQUIPMENT. SWEEP & DISCARD.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). BURN IN ADEQUATE INCINERATOR OR BURY IN APPROVED
LANDFILL.
Handling And Storage Precautions: WARNING! CAUSES IRRITATION. AVOID CONTACT
W/EYES, SKIN OR CLOTHING. AVOID BREATHING VAPOR, MIST OR SPRAY. USE W/GOOD
VENTILATION.
Other Precautions: STORE IN COOL, DRY AREA IN CLOSED CONTAINERS. FOR POWDERS
ONLY; IN ADHESIVE PRODUCT, POWDERS ARE BOUND IN ADHESIVE & VALUES ARE NOT
APPLICABLE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Lower Limits: NONE
Upper Limits: NONE
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: WATER FOG, CARBON DIOXIDE, DRY CHEMICAL.
Unusual Fire/Explosion Hazard: DECOMPOSITION & COMBUSTION PRODUCTS MAY BE
TOXIC.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation: GOOD GENERAL VENTILATION & LOCAL EXHAUST RECOMMENDED.
Protective Gloves: IMPERVIOUS GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: CLEAN, BODY-COVERING CLOTHING, USE OF APPROVED
BARRIER CREAM RECOMMENDED.
Work Hygienic Practices: WASH AFTER HANDLING & BEFORE EATING, DRINKING OR
SMOKING.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 3.5
Solubility in Water: NONE
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG ACIDS, STRONG BASES.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ME8456
Assigned IND: Y
Company: AI TECHNOLOGY INC
Street: 9 PRINCESS RD
PO Box: 3081
City: LAWRENCEVILLE NJ
Zipcode: 08648
Health Emergency Phone: 609-896-3838
Label Required IND: Y
Date Of Label Review: 09/01/1995
Status Code: C
Label Date: 09/01/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INGESTION:LOW SINGLE DOSE ORAL TOXICITY. EYE
CONTACT:MINOR TRANSIENT IRRITATION. SKIN CONTACT:MINOR TO NO IRRITATION.
SKIN ABSORPTION:NOT ABSORBED IN TOXIC AMOUNTS. CHRONIC:MAY BE A WEAK SENSIT
IZER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.