3M MINNESOTA MINING & MFG/INDU -- 3549A URETHANE ADHESIVE/SCOTCH-WELD DP-640
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-294-5223
MSDS Num: BZGBJ
MSDS NAME: 3549A URETHANE ADHESIVE/SCOTCH-WELD DP-640
Kit Part: Y
Responsible Party
Name: 3M MINNESOTA MINING & MFG/INDUSTRIAL TAPE DIV
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES DIV
Address: 3M CENTER
City: ST PAUL MN 55144-1000
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES DIV
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Phone: 1-800-364-3577
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
=======================================================
Item Description Information
=======================================================
Item Manager: GSA
Item Name: ADHESIVE
Unit of Issue: KT
UI Container Qty: 1
=======================================================
Ingredients
=======================================================
Name: URETHANE PREPOLYMER
% Wt: 25-35
-----------------------------
Cas: 14807-96-6
RTECS #: WW2710000
Name: TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM SILICATE
% Wt: 20-30
OSHA PEL: 2 MG/CUM (RESP DUST)
ACGIH TLV: 2 MG/CUM (RESP DUST)
------------------------------
Cas: 26447-40-5
Name: 1,1'-METHYLENEBIS(ISOCYANATO-BENZENE), DIPHENYLMETHANE DIISOCYANATE
*96-2*
% Wt: 15-25
------------------------------
Cas: 9016-87-9
RTECS #: TR0350000
Name: HIGHER OLIGOMERS OF MDI, POLYMETHYLENE POLYPHENYLENE POLYISOCYANATE
% Wt: 15-25
------------------------------
Cas: 68989-22-0
Name: ZEOLITES, SODIUM ALUMINOSILICATE *96-2*
% Wt: 1-5
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MODERATE IRRITATION. SKIN: MILD IRRITANT, CAUSING
ALLERGIC REACTION. INHALATION: MAY CAUSE IRRITATION TO UPPER RESPIRATORY,
RESPIRATORY FAILURE. INGESTION: MAY CAUSE IRRITATION OF GASTROINTESTIN AL
TISSUES.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION, REDNESS, SWELLING, PAIN,
TEARING, HAZY VISION, BLISTERING, DIFFICULTY BREATHING, WHEEZING, TIGHTNESS
OF CHEST, RESPIRATORY FAILURE, SORENESS OF THE NOSE & THROAT, COUGHING,
SNEEZING, VOMIT ING, ABDOMINAL TENDERNESS, BLOOD IN VOMITUS & BLOOD IN
FECES.
First Aid: EYES: IMMEDIATELY FLUSH W/LARGE AMOUNTS OF WATER. SKIN: IMMEDIATELY
WASH W/SOAP & LARGE AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH AIR. IF
NOT BREATHING, GIVE CPR. INGESTION: DON'T INDUCE VOMITING. DRINK 2 GLASSES
OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: EVACUATE UNPROTECTED PERSONNEL FROM HAZARD AREA. POUR
ISOCYANATE SOLUTION ON SPILL & ALLOW TO REACT FOR 10 MINS. ALTERNATELY,
POUR WATER & ALLOW TO REACT FOR MORE THAN 30 MINS. COVER W/ABSORBENT.
PLAC E IN AN APPROVED DRUM, UNSEALED FOR 48 HOURS.
Neutralizing Agent: 90% WATER, 8% CONCENTRATED AMMONIA, 2% DETERGENT
Waste Disposal Methods: INCINERATE IN AN INDUSTRIAL/COMMERCIAL FACILITY IN THE
PRESENCE OF A COMBUSTIBLE MATERIAL. DISPOSE OF CURED MATERIAL IN A SANTARY
LANDFILL. DISPOSE OF WASTE PRODUCT IN A FACILITY PERMITTED FOR CHEMICA L
WASTE IAW/LOCAL, STATE & FEDERAL REGULATIONS.
Handling And Storage Precautions: STORE AT TEMPS <120F. KEEP CONTAINER
CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINER TIGHTLY
CLOSED. USE IN WELL VENTILATED AREA
Other Precautions: WHEN GRINDING/SANDING THE CURED MATERIAL, FOLLOW PRECAUTIONS
FOR DUSTS GIVEN IN THE PART B (NO.3549) MATERIAL SAFETY DATA SHEET. AVOID EYE
& SKIN CONTACT. AVOID BREATHING VAPORS. DON'T INGEST.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER SPRAY, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures: WEAR FULL PROTECTIVE CLOTHING, HELMET, SCBA
W/POSITIVE PRESSURE/PRESSURE DEMAND, BUNKER COAT/PANTS, BANDS AROUND ARMS,
WAIST & LEGS, FACE MASK & HEADCOVERING.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE HALF-MASK SUPPLIED AIR RESPIRATOR BASED ON AIRBORNE
CONCENTRATION OF CONTAMINANTS & IAW/OSHA REGULATIONS.
Ventilation: SUFFICIENT TO MAINTAIN EMISSIONS <RECOMMENDED EXPOSURE LIMITS.
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL
Eye Protection: VENTED GOGGLES
Other Protective Equipment: SAFETY GLASSES W/SIDE SHIELDS, POLYVINYL
ALCOHOL/POLYTETRAFLUOROETHYLENE (TEFLON)/FLUOROELASTOMER (VITON) GLOVES
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 406F
Vapor Pres: 0
Spec Gravity: 1.35
Solubility in Water: INSOLUBLE
Appearance and Odor: BROWN, VISCOUS LIQUID
Percent Volatiles by Volume: 0/WT
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: CURING A MASS LARGER THAN 50 GMS IN CONFINED
SPACES TO PREVENT A PREMATURE REACTION (EXOTHERM) W/PRODUCTION HEAT/SMOKE.
Materials To Avoid: AMINES, ALCOHOLS, WATER
Hazardous Decomposition Products: CO, CO2, OXIDES OF NITROGEN, HYDROGEN
CYANIDE, ISOCYANATES, TOXIC VAPORS, GASES/PATICULATES
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 3549A URETHANE ADHESIVE/SCOTCH-WELD DP-640
Company: MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES
DIV
Street: 3M CENTER
City: ST PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 12/16/1998
Status Code: C
Label Date: 12/16/1998
Origination Code: G
Hazard And Precautions: EYES: MODERATE IRRITATION. SKIN: MILD IRRITANT, CAUSING
ALLERGIC REACTION. INHALATION: MAY CAUSE IRRITATION TO UPPER RESPIRATORY,
RESPIRATORY FAILURE. INGESTION: MAY CAUSE IRRITATION OF GASTROINTESTIN AL
TISSUES.
IRRITATION, REDNESS, SWELLING, PAIN, TEARING, HAZY VISION,
BLISTERING, DIFFICULTY BREATHING, WHEEZING, TIGHTN ESS OF CHEST, RESPIRATORY
FAILURE, SORENESS OF THENOSE & THROAT, COUGHING, SNEEZING, VOMITING,
ABDOMINAL TENDERNESS, BLOOD IN VOMITUS & BLOOD IN FECES.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|