PRO-LINE PAINT COMPANY -- EPOXY-POLYAMIDE PRIMER, STRONTIUM YELLOW, COM
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCPPS
MSDS NAME: EPOXY-POLYAMIDE PRIMER, STRONTIUM YELLOW, COMP A,4018
Kit Part: Y
Responsible Party
Name: PRO-LINE PAINT COMPANY
Address: 2646 MAIN ST
City: SAN DIEGO CA 92113-3697
Info Phone: 619-231-2313
Emergency Phone Number: 800-535-5053
Preparer's Name: E SOETERIK
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PRO-LINE PAINT CO
Address: 2646 MAIN STREET
City: SAN DIEGO CA 92113-3697
Phone: 619-231-2313; 619-232-8968
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: NAUSEA, DIZZINESS, HEADACHE AND CONVULSIONS. INHAL:
COUGHING, SHORTNESS OF BREATH, MAY CAUSE DIZZINESS. SKIN AND EYES: BURNING
SENSATION, RASH BREAKOUT WITH SKIN TURNING PINK AND REDNESS OF EYE S.
ABSORBED THROUGH SKIN: SKIN RASH MAYCAUSE BURNING OF SKIN AND INFLAMMATION.
INGEST: VOMITING DUE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: UNPLEASANT TASTE. MAY CAUSE
DIARR/STOMACH CRAMPS. CHRONIC: POSSIBLE SKIN SENSITIZATION. WARNING:
DETECTABLE AMTS OF CHEMS/SUBSTANCES KNOWN TO THE STATE OF CA TO CAUSE CANCER,
BIRTH DEFECTS/O THER REPROD HARM MAY BE FOUND IN CHEM PROD, PETROLEUM PROD
& THEIR VAP. FOLLOW APPLICABLE DIRECTIONS & USE CARE (SUPDAT)
Medical Cond Aggravated By Exposure: ASTHMA, EMPHYSEMA AND OTHER RESPIRATORY
DISEASES.
First Aid: EYE:FLUSH IMMED W/FRESH H*2O BY AN EYE WASH APPARATUS/BY HAND FOR AT
LEAST 15 MIN. SEEK MED ATTN. SKIN:WASH IMMED W/H*2O. THEN WASH W/SOAP &
H*2O, RINSE IMMED. IF BURNING SENSATION, RASH BREAK OUT/OTH ER SYMPS OCCUR
SEEK MED ATTN. INHAL:MOVE PER TO FRESH AIR; ARTF RESP IF NEC. SEEK MED ATTN.
INGEST:SEEK MED ATTN. RECOMMENDATIONS TO MD:CONSULT W/POISON CONTROL CENTER
& FOR WORKERS WHO ARE
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIANT VENTILATION. PROTECT CLEAN-UP MAN WITH 8540 3M CORP NIOSH APPROVE
RESPIRATOR, GOGGLES AND RUBBER GLOVES. (NOTE RESPIRATORY PROTECTION SECTION).
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: USE METAL CONTAINER MARKED "DO NOT REUSE". PUT THE
MATERIAL IN THIS CONTAINER. USE VERMICULITE OR OTHER INERT ABSORBENT. KEEP
AWAY FROM SEWER. NOTE: DISPOSE OF ALL WASTE IN ACCORDANCE WITH FEDERAL, ST
ATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: PROTECT AGAINST PHYSICAL DMG TO CONTAINERS
& SPILLAGE. STORE IN A COOL WELL VENT AREA W/SPRINKLER SYSTEM. KEEP AWAY
FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions: GAS VAPOR TYPICAL OF BUTANOL IS NOT AN ADEQUATE WARNING FOR
INTOXICATION. USE WITH ADEQUATE VENTILATION.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 100F,38C
Lower Limits: 1.4%
Upper Limits: 11.2%
Extinguishing Media: WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). BLANKET FLAME WITH ONE OF THE ABOVE.
Unusual Fire/Explosion Hazard: KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND OPEN
FLAMES. EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE WHEN
EXTINGUISHING.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE DUST/MIST RESP (HIGH EFFICIENCY CARTRIDGES ADVISED)
IF SPRAYING/SANDING. USE ORG VAP CARTRIDGE RESP IF TLV FOR SOLVENT COMPONENT
MAY BE EXCEEDED E.G. 8540 3M CORP RESP, (NIOSH APPROVED). WHEN USIN G IN
CONFINED AREA, WEAR AIR-FED HOOD.
Ventilation: USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED AREAS. KEEP
VAPORS BELOW TLV.
Protective Gloves: RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPRVD EMER EYE WASH & DELUGE SHOWER (FP N).
USE PROTECTIVE CLOTHING & CHANGE CONTAMINATED CLOTHING IMMEDIATELY.
Work Hygienic Practices: TRAIN EMPLOYEES ON ALL SPECIAL HANDLING PROCEDURES IN
THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). EFTS OF OVEREXP:WHEN HANDLING CHEM &
PETROLEUM PROD. (CALIFORNIA HEALTH & SAFETY CODE SECTION 25249.6). RPTS
HAVE SHOWN THAT ASSOCD RPTD & PRLNG OCUP OVEREXP TO SOLV CAN CAUSE PERM
BRAIN & NERVOUS SYS DAMAGE. INTENTIONAL MISUSE
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 98.0F,36.7C
Vapor Pres: 3.7 @ 60F
Vapor Density: 3.31
Spec Gravity: 1.34
Evaporation Rate & Reference: 0.42 (BUTYL ACETATE = 1)
Solubility in Water: PARTIAL
Appearance and Odor: YELLOW LIQUID WITH AROMATIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW VAPOR
TO ACCUMULATE.
Materials To Avoid: WHEN "A" & "B" ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL
CREATE A RAPID CHEMICAL REACTION. EMITS HEAT.
Hazardous Decomposition Products: FLAMMABLE FUMES MAY ACCUMULATE IN CONFINED
AREA AND SPARKS OR OPEN FLAMES MAY IGNITE IT.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EPOXY-POLYAMIDE PRIMER, STRONTIUM YELLOW, COMP A,4018
Company: PRO-LINE PAINT CO
Street: 2646 MAIN STREET
City: SAN DIEGO CA
Zipcode: 92113-3697
Health Emergency Phone: 800-535-5053
Label Required IND: Y
Date Of Label Review: 10/21/1996
Status Code: C
Label Date: 10/21/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: NAUSEA, DIZZINESS, HEADACHE AND
CONVULSIONS. INHAL:COUGHING, SHORTNESS OF BREATH, MAY CAUSE DIZZINESS. SKIN
AND EYES: BURNING SENSATION, RASH BREAKOUT WITH SKIN TURNING PINK AND RE
DNESS OF EYES. ABSORBED THROUGH SKIN: SKIN RASH MAY CAUSE BURNING OF SKIN AND
INFLAMMATION. INGEST: VOMITING DUE TO UNPLEASANT TASTE. MAY CAUSE DIARRHEA OR
STOMACH CRAMPS. CHRONIC: POSSIBLE SKIN SENSI TIZATION. MAY CAUSE CANCER,
BIRTH DEFECTS BRAIN OR OTHER REPRODUCTIVE HARM. POSSIBLE PERMANENT BRAIN
DAMAGE & NERVOUS SYSTEM DAMAGE. MISUSE MAY BE HARMFUL OR FATAL.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TINCTURE GREEN SOAP
| |
|
WELD-ON P-68 PRIMER FOR PVC/CPVC PLASTIC PIPE
| |
|
HIGHWAY SAFETY SPHERES WITH ADHERENCE COATING
| 65997-17-3 |
|
BASE/NEUTRALS MATRIX SPIKING SOLUTION, CLP-300
| 75-09-2
83-32-9
106-46-7
121-14-2
621-64-7
129-00-0
120-82-1 |
|
EPO COAT VA (PIGMENTED)
| 1330-20-7
78-93-3
108-10-1 |
|
XL-300, AIR COMPRESSORS
| |
|
WELDWOOD WATERPROOF RESORCINOL GLUE (LIQUID RESIN)
| |
|
DURO SUPER GLUE-5, 80860
| 7085-85-0
9011-14-7
123-31-9 |
|
PRO-CLEAN HARD WATER STAIN REMOVER - AMAZ
| 14808-60-7
8008-20-6 |
|
UCON COATING FLUID LB-1145-XY-24, 65000
| |
|
UCON COATING FLUID LB-1145-XY-24, 65001
| |
|
UCON COATING FLUID LB-1145-XY-24, 65002
| |
|
SPEEDHIDE S/G LTX. H&T PAINTS, 6-J (031992M)
| 13463-67-7
25265-77-4
7732-18-5 |
|
DU HARDENERS, DU 5
| 53880-05-0
28182-81-2
110-43-0
64742-95-6
123-86-4
4098-71-9 |
|
DU HARDENERS, DU 6
| 53880-05-0
28182-81-2
110-43-0
64742-95-6
123-86-4
4098-71-9 |
|
ACE PREMIUM I17000 GL WHT
| 13463-67-7
1330-20-7
108-88-3
67-64-1
763-69-9
75-28-5
74-98-6 |
|
TIRE CARE
| |
|
REZ EXT S/T STAIN BASE, 77-460
| 126-73-8
68855-54-9
60676-86-0
107-21-1
7732-18-5
14808-60-7
14464-46-1 |
|
MS-H DURO SPRAY ADHES 11 OZ AE, 81088
| |
|
LWS 1055 NAPA DOT 4 BRAKE FLUID, CPE088114
| |
|
AB AQUATRINE
| 12069-69-1
141-43-5
102-71-6 |
|
PORE-O-PAC PASTE WOOD FILLER, B-744-ALL NUMBERS
| 64742-88-7 |
|
DERUSTO MINUTE-SOLV THINNER 5, 25001
| 8052-41-3
123-86-4 |
|
MULTI-PURPOSE ADHESIVE CAULK (CLEAR), 10028
| |
|
DERUSTO EASE-IT SILICONE SPRAY, 20802
| |
|
DPD 1A, P-6740
| |
|
N-1000 LUBRICANT, 51115-51117
| |
|
POLYSIMETHYLSILOXANE SEALANT, RTV167
| |
|
BC-10 INK CARTRIDGE & BCI-10 CRG, F45-0631-400
| |
|
TRICON SOIL PH INDICATOR, 5937
| 64-17-5
67-56-1
7732-18-5
77-09-8
76-59-5
493-52-7 |
|
FT-12 FIT TEST SOLUTION, 70-0701-2146-5
| 7732-18-5
128-44-9 |
|
PEEL AWAY 2
| |
|
SHAPE (0624A)
| 1314-13-2
7732-18-5
63744-68-3
111-77-3
68527-08-2
78-51-3 |
|
ACCELERATOR 17
| |
|
HAND-TO-HAND, 5820
| |
|
ULTRAFINISH Q24L
| 526-95-4 |
|
METAL PROTECTIVE COATING
| |
|
BIG TEX, 0003
| |
|
PPB-6 DECOLORIZER SOLUTION, 23747
| 6381-92-6
7732-18-5 |
|
M-2950 CHEM-PAC FIXER
| 7732-18-5
7772-98-7
7775-19-1
64-19-7
10043-67-1
7757-83-7
107-21-1 |
|
ULTRA LOW RANGE COD REAGENT 0-40 PPM RANGE, 24158
| 7664-93-9
7783-35-9
10294-26-5
13530-68-2
7732-18-5 |
|
NITRITE REAGENT 2, 7103
| 7722-64-7
7732-18-5 |
|
EPOXY-POLYAMIDE PRIMER, STRONTIUM YELLOW, COMP A,4018
| |
|
EPOXY-POLYAMIDE PRIMER, STRONTIUM YELLOW, COMP B,4018
| |
|
CHEM-OIL-AWAY
| |
|
OPTICAL ADHESIVE 63, NOA63
| |
|
SILICONIZED POLYACRYLIC CONTACT CEMENT, 30520
| |
|
BLACK MATRIX, 0%, 6565
| 64742-52-5 |
|
FIRE EXPANSION JOINT, 1103360
| 8052-42-4 |
|
CLEAN STRIP ULTRA (J-3)
| |
|
|