bisphenol a-epichlorohydrin copolymer; (modified diglycidyl ether of alkyl glycidyl ether (mfr's invalid cas no:68809-97-2) benzyl alcohol carbon black volatile organic compounds: none.
HILTI INC -- RM 710EP 6-TEMP EPOXY MORTAR PART A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCTLQ
MSDS NAME: RM 710EP 6-TEMP EPOXY MORTAR PART A
Kit Part: Y
Responsible Party
Name: HILTI INC
Box: 21148
City: TULSA OK 74121
Info Phone: 800-879-6000
Emergency Phone Number: 800-879-4444
Preparer's Name: BILL MCCANN
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: SL6475000
Name: BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (MODIFIED DIGLYCIDYL ETHER OF
BISPHENOL A)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 6809-97-2
Name: ALKYL GLYCIDYL ETHER (MFR'S INVALID CAS NO:68809-97-2)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 100-51-6
RTECS #: DN3150000
Name: BENZYL ALCOHOL
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 1333-86-4
RTECS #: FF5800000
Name: CARBON BLACK
OSHA PEL: 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
------------------------------
RTECS #: 9999999VO
Name: VOLATILE ORGANIC COMPOUNDS: NONE.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: EYE AND SKIN IRRITATION WITH POSSIBLE BURNS.
SENSITIZATION. IRRITATION TO SKIN AND EYES. CAN CAUSE EYE AND SKIN BURNS. CAN
CAUSE ALLERGIC SKIN REACTIONS WITH SUSCEPTIBLE INDIVIDUALS.
Explanation Of Carcinogenicity: CARBON BLACK:IARC MONOGRAPHS ON EVALUATION OF
CARCINOGENIC RISK OF CHEMICALS TO MAN, VOL 65, PG 24-27, 1995:GROUP 2B.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: EYE, SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES:IMMED FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS. CALL MD.
SKIN:WASH W/SOAP & WATER. LAUNDER CONTAM CLTHG BEFORE REUSE. INHAL:MOVE
VICTIM TO FRESH AIR. CALL MD IF SYMPS PERSIST. INGEST:IF CONSCIO US, GIVE
PLENTY OF WATER TO DRINK. SEEKMED ATTN. DO NOT INDUCE VOMIT UNLESS DIRECTED
TO BY MD. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. OTHER:REFERRAL
TO MD IS REC IF THERE IS ANY (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SPILLAGE W/ABSORBENT MATERIAL & DISPOSE
I/A/W FEDERAL, STATE & LOCAL REGULATIONS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CONSULT W/REGULATORY AGENCIES OR CORPORATE PERSONNEL
FOR DISPOSAL METHODS THAT COMPLY W/LOCAL, STATE & FEDERAL HEALTH &
ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: AVOID CONTACT W/EYES, SKIN OR CLOTHING. STORE
IN A COOL, DRY PLACE. STORE BELOW 100F. KEEP FROM FREEZING. KEEP CONTAINER
CLOSED WHEN NOT IN USE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: >200F,>93C
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: THERMAL DECOMPOSITION & COMBUSTION PRODUCTS
CAN BE FORMED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQD W/ADEQ VENT AS NOTED. USE NIOSH
APPRVD ORGANIC VAP CARTRIDGE RESP WHEN WORKING IN AREAS W/LITTLE OR NO AIR
MOVEMENT. NEVER ENTER A CONFINED SPACE UNLESS WEARING AN APPROP NIOSH APPR VD
AIR-SUPPLIED RESP (E.G. SCBA/(SUPDAT)
Ventilation: GENERAL (I.E. NATURAL OR MECHANICALLY INDUCED FRESH AIR
MOVEMENTS).
Protective Gloves: COTTON/IMPERVIOUS (NEOPRENE/RUBBER).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health: FIRST AID PROC:QUESTION ABOUT THE SERIOUSNESS
OF THE INJURY/EXPOSURE. RESP PROT:AIRLINE W/ESCAPE PACK). EYE PROT:& FULL
LENGTH FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: DECOMPOSES
Spec Gravity: 1.1
Solubility in Water: NIL
Appearance and Odor: LOW VISCOSITY GRAY LIQUID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME.
REACTIONS W/SOME CURING AGENTS CAN GENERATE LARGE AMOUNTS OF HEAT.
Materials To Avoid: STRONG OXIDIZERS, PEROXIDES, ACIDS.
Hazardous Decomposition Products: THERMAL DECOMPOSITION CAN YIELD CO & CO*2.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: RM 710EP 6-TEMP EPOXY MORTAR PART A
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 800-879-4444
Label Required IND: Y
Date Of Label Review: 12/03/1996
Status Code: C
Label Date: 12/03/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: AVOID EYE AND SKIN CONTACT. ACUTE:EYE AND SKIN
IRRITATION WITH POSSIBLE BURNS. SENSITIZATION. IRRITATION TO SKIN AND EYES.
CAN CAUSE EYE AND SKIN BURNS. CAN CAUSE ALLERGIC SKIN REACTIONS WITH SUSCEPTI
BLE INDIVIDUALS. CHRONIC:CANCER HAZARD.CONTAINS CARBON BLACK, WHICH IS LISTED
AS AN ANIMAL LUNG CARCINOGEN (FP N). SENSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.