NEW LUBE INC -- NEW-LUBE, NLB 100
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCTRS
MSDS NAME: NEW-LUBE, NLB 100
Responsible Party
Name: NEW LUBE INC
Address: 22024 WEST VALLEY HWY
City: KENT WA 98032
Info Phone: 800-227-9876
Emergency Phone Number: 206-395-3333
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: NEW LUBE INC
Address: 22024 WEST VALLEY HWY
City: KENT WA 98032
Phone: 800-227-9876
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:SKIN:PROLONGED AND REPEATED SKIN CONTACT MAY CAUSE
IRRITATION OR SKIN DISORDERS SUCH AS DERMATITIS OR OIL ACNE. EYES:CONTACT
WITH EYES MAY CAUSE TEMPORARY IRRITATION. INHALATION OF VAPORS (GENER ATED AT
HIGH TEMPERATURES ONLY) OR OIL MIST MAY CAUSE A MILD IRRITATION OF THE MUCOUS
MEMBRANES OF THE (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:UPPER RESPIRATORY TRACT.
Medical Cond Aggravated By Exposure: PRE-EXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.
First Aid: SKIN:REMOVE CONTAMD CLOTHING & WASH THOROUGHLY W/SOAP &
WATER. IF IRRIT OCCURS, GET MED ATTN. EYES:FLUSH W/WATER FOR @ LST 15 MINS,
LIFTING UPPER & LOWER EYELIDS OCCASIONALLY. IF IRRIT OCCURS, GET MED
ATTN. INHAL:REMOVE VICTIM TO FRESH AIR& PROVIDE OXYG IF BRTHG IS
DIFFICULT. GET MED ATTN. INGEST:DO NOT INDUCE VOMITING. GET MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SOAK UP WITH ABSORBENT MATERIAL, SAND, OR SAWDUST.
KEEP FROM SEWERS AND WATERWAYS BY DIKING. DISPOSE OF RECOVERED MATERIAL AND
RESIDUE IN COMPLIANCE WITH ALL FEDERAL, STATE, AND LOCAL REGULATIONS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: THIS PRODUCT, IF DISPOSED OF, IS NOT CONSIDERED A
HAZARDOUS WASTE UNDER CURRENT RCRA REGULATIONS. DISPOSAL MUST BE I/A/W
FEDERAL, STATE & LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT
STORE NEAR HEAT, OPEN FLAMES OR STRONG OXIDANTS.
Other Precautions: NOT REQUIRED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: OC
Flash Point Text: 300F,149C
Extinguishing Media: USE WATER, FOG, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). DO NOT USE DIRECT STREAM OF WATER. PRODUCT MAY FLOAT AND
CAN BE REIGNITED ON SURFACE.
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH APPROVED CHEMICAL MIST AND ORGANIC VAPOR
RESPIRATOR AS NEEDED TO PREVENT OVEREXPOSURE TO MIST OR FUMES.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: CHEMICALLY RESISTANT GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 0.8 (H*2O=1)
Evaporation Rate & Reference: NOT KNOWN
Solubility in Water: DISPERSIBLE
Appearance and Odor: GREEN SOLID, PETROLEUM ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS, OPEN FLAME.
Materials To Avoid: STRONG OXIDANTS.
Hazardous Decomposition Products: OR BYPRODUCTS;HIGHLY DEPENDENT ON COMBUSTION
CONDITIONS. CO*2 AND OTHER ORGANIC CMPDS MAY FORM UPON COMBUSTION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: STRONG OXIDANTS, HEAT, SPARK AND OPEN
FLAMES.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: NEW-LUBE, NLB 100
Assigned IND: Y
Company: NEW LUBE INC
Street: 22024 WEST VALLEY HWY
City: KENT WA
Zipcode: 98032
Health Emergency Phone: 206-395-3333
Label Required IND: Y
Date Of Label Review: 12/06/1996
Status Code: C
Label Date: 12/06/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:SKIN:PROLONGED AND REPEATED SKIN
CONTACT MAY CAUSE IRRITATION OR SKIN DISORDERS SUCH AS DERMATITIS OR OIL
ACNE. EYES:CONTACT WITH EYES MAY CAUSE TEMPORARY IRRITATION. INHALATION OF
VAPORS (GENERATED AT HIGH TEMPERATURES ONLY) OR OIL MIST MAY CAUSE A MILD
IRRITATION OF THE MUCOUS MEMBRANES OF THE UPPER RESPIRATORY TRACT.
CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PACIFIC HIGH BUILD
| |
|
PACIFIC STRONG (GLOSS)
| |
|
PACIFIC STRONG (SILKMAT)
| |
|
RM 710EP 6-TEMP EPOXY MORTAR PART A
| 25068-38-6
6809-97-2
100-51-6
1333-86-4 |
|
RM 710EP 6-TEMP EPOXY MORTAR PART B
| 108-95-2
1477-55-0 |
|
RM 710EP 6-TEMP EPOXY MORTAR PART C
| 14808-60-7 |
|
GOLDEN SPECTRO CYCLE GEAR LUBE
| |
|
ALKALINE BUTTON BATTERY
| 7439-97-6
1313-13-9 |
|
HARBOLITE
| 93763-70-3
60676-86-0
1309-37-1
1309-48-4
1305-78-8
12401-86-4
13463-67-7
1314-23-4
1344-43-0 |
|
WATERPROOFING SEALANT
| 64742-94-5 |
|
BROMINATING TABLETS
| 126-06-7
118-52-5
89415-87-2 |
|
SASSAFRAS OIL, 19-11000
| |
|
APTT REAGENT WITH CALCIUM CHLORIDE, 0022926
| 26628-22-8 |
|
NEW-LUBE, NLB 100
| |
|
SEALED LEAD ACID BATTERY
| 7439-92-1
1309-60-0
7446-14-2
7664-93-9 |
|
MIDWEST FASTENER IHA-170 HANGER ADHESIVE, 121723
| 108-88-3 |
|
ALL GUARD PUMP PROTECTOR
| |
|
GLAS-GRIP 636 SE
| 142-82-5
9003-55-8
65997-05-9 |
|
IRON-GRIP 601
| |
|
JOHNSONITE 915
| |
|
STYRENE
| 100-42-5 |
|
A755R
| 67-63-0
84852-15-3
64742-95-6
25085-99-8 |
|
SELBAFLEX GRAY, A765-004
| 25085-99-8
981-40-8
115-86-6
68609-97-2 |
|
138C0927, DEVGRIP 138HR HEAVY DUTY EPOXY (SUPDAT)
| 63231-67-4
64742-95-6
67-56-1 |
|
30-516 TO BLUE MOOD, 30-516BM
| 1332-58-7
13463-67-7
26264-05-1
9002-93-1 |
|
SELBAFLEX FR PART A, A760
| 25085-99-8
115-86-6
68609-97-2 |
|
SELBAFLEX FR PART B, B735
| 1761-71-3
25154-52-3 |
|
420 VOC TEFLON 36375 GRAY, 23T3-103
| 14464-46-1
123-86-4
110-43-0
108-65-6
1344-28-1
71-43-2
7439-92-1 |
|
FMS-1027, 36375, TYPE 5, 18GY013
| |
|
CAT FMS-1027, 36375, TYPE 5, 18GY013CAT
| 4035-89-6
822-06-0
28182-81-2
64742-95-6
123-86-4
763-69-9 |
|
FT TONER TYPE 510 - BLACK, FT5733
| |
|
FT TONER TYPE 510 - BLACK, FT5433
| |
|
FT TONER TYPE 510 - BLACK, FT4427
| |
|
FT TONER TYPE 510 - BLACK, FT4727
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 55 GALLON DRUM
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 5 GALLON PAIL
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 1 GALLON CAN
| |
|
62-3693-8530-7, SCOTCH WELD 460 (PART A) (SUP DAT)
| |
|
SYNTHETIC GEAR LUBRICANT TEGRA ISO 220, CPS233917
| |
|
CORROSION X HEAVY-DUTY, (BULK)
| |
|
CORROSION X HEAVY-DUTY, (AEROSOL)
| |
|
SECAR 80 (FRENCH SOURCE)
| 1344-28-1 |
|
PHOS-CHEK WD881 FIRE SUPPRESSANT FOAM CONCENTRATE
| |
|
KROIL
| |
|
TYPE 248 TONER
| 25767-47-9
58353-09-6
8005-02-5
9003-07-0
1333-86-4
112945-52-5 |
|
HYSOL M-9-N SERIES WHITE INK, XX0018
| |
|
74-6615 PROTOSLO
| |
|
FOG FLUID
| |
|
CUTTING FLUID SULFURIZED FATTY AND MINERAL OILS VV-C-560A
| |
|
BARSOL A-2688
| |
|
|