3M GENERAL OFFICES -- 62-3693-8530-7, SCOTCH WELD 460 (PART A) (SUP
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCVJH
MSDS NAME: 62-3693-8530-7, SCOTCH WELD 460 (PART A) (SUP DAT)
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYE: CHEM RELATED EYE BURNS (CHEM CORROSIVITY),
INCLUDING CLOUDY APPEAR OF CORNEA, CHEM BURNS, PAIN, TEARING, ULCERS,
IMPAIRED VISION/LOSS OF VISION. VAPS FROM HEATED MATL MAY CAUSE EYE IRRIT.
DUST CREATED BY CUTTING, GRINDING, SANDING/MACHINING MAY CAUSE EYE IRRIT.
SKIN: ALLERGIC SKIN RXN, (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: INCLUDING REDNESS, SWELL,
BLISTERING, & ITCH. SKIN BURNS (CHEM CORROSIVITY), INCLUDING REDNESS,
SWELL, ITCH, PAIN, BLISTERING, ULCERATION, SLOUGHING, & SCAR FORM. INHAL:
IRRIT (UPPER RESP), INCLUDING SORENESS OF NOSE & THROAT, COUGHING &
SNEEZING. VAPS OF HEATED MATL MAY CAUSE RESP SYS IRRIT.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN. GET IMMED
MED ATTN. SKIN: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN IN CHEM
SFTY SHOWER WHILE REMOVING CONTAM CLTHG & SHOES. GET IM MED MED ATTN.
WASH CONTAM CLTHG BEFORE REUSE. INHAL: IF SIGNS/SYMPS OCCUR, REMOVE PERS TO
FRESH AIR. IF SIGNS/SYMPS CONTINUE, CALL MD. INGEST: DO NOT INDUCE VOMIT.
DRINK 2 GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF MSDS FOR INFO REGARDING
PHYSICAL & HLTH HAZ, RESP PROT, VENT, & PERS PROT EQUIP. CALL (612)
733-1110/(612) 733-6100 FOR 24 HR SPILL ASSIST. COVER W/ABSORB MATL. COLLECT
SPIL LED MATL. PLACE IN U.S. DOT APPRVD CONTR & SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCIN UNCURED
WASTE IN INDUS/COMMERCIAL INCIN. DISP OF COMPLETELY CURED (OR POLYMERIZED)
MATL IN SANITARY LANDFILL. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS (FP N).
Handling And Storage Precautions: AVOID EYE AND SKIN CONTACT. STORE AWAY FROM
HEAT. KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions: KEEP CONTAINER TIGHTLY CLOSED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 340F,171C
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING OF VAPORS. AVOID BREATHING OF DUST
CREATED BY CUTTING, SANDING/GRINDING. SELECT ONE OF THE FOLLOWING NIOSH
APPRVD RESPS BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & I/A/W OSHA
REG ULATIONS: HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHST FOR GRINDING, CUTTING/SANDING CURED MATL.
CURING OVENS MUST BE EXHAUSTED TO OUTDOORS/ (SUP DAT)
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGG
Other Protective Equipment: EMERGENCY EYEWASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: TRADE NAME/PART #: OFF WHITE EPOXY ADHESIVE
(1PB). USERS OF THE "L" VERSION OF SHOULD CONSULT "LR" VERSION FOR ADDNL
INFO (FP N). MATLS TO AVOID: (EXOTHERM) W/PRODUCTION OF INTENSE HEAT &
SMOKE. VENT: TO SUITABLE EMISSION CTL DEVICE. USE IN WELL-VENTD AREA. IF
EXHST VENT IS NOT ADEQ, USE APPROP RESP PROT.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Density: 3.72
Spec Gravity: 1.090 (H*2O=1)
Solubility in Water: SLIGHT
Appearance and Odor: VISCOUS LIQUID, AMBER, VERY MILD PUNGENT ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: HEAT IS GENERATED DURING CURE. DO NOT CURE MASS LARGER THAN
50 GRAMS IN CONFINED SPACE TO PVNT PREMATURE RXN (SUP DAT)
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE, OXIDES OF
NITROGEN, AMINE COMPOUNDS, TOX VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 62-3693-8530-7, SCOTCH WELD 460 (PART A) (SUP DAT)
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 12/16/1996
Status Code: C
Label Date: 12/16/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: CORROSIVE. ACUTE: EYE: CHEMICAL RELATED EYE BURNS
(CHEMICAL CORROSIVITY), INCLUDING CLOUDY APPEARANCE OF CORNEA, CHEMICAL
BURNS, PAIN, TEARING, ULCERS, IMPAIRED VISION/LOSS OF VISION. VAPORS FROM
HEAT ED MATERIAL MAY CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRINDING,
SANDING/MACHINING MAY CAUSE EYE IRRITATION. SKIN: ALLERGIC SKIN REACTION,
REDNESS, SWELLING, ITCHING, BURNING, BLISTERING & SCA R FORMATION.
INHALATION: IRRITATION OF UPPER RESPIRATORY TRACT, SORENESS OF NOSE &
THROAT, COUGHING & SNEEZING. INGESTION: IRRITATION OF GI TRACT, PAIN,
VOMITING, NAUSEA, BLOOD IN VOMITUS & BLOOD IN F ECES. CHRONIC: NONE
SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|