CORROSION TECHNOLOGIES CORP -- CORROSION X HEAVY-DUTY, (BULK)
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCVJZ
MSDS NAME: CORROSION X HEAVY-DUTY, (BULK)
Responsible Party
Name: CORROSION TECHNOLOGIES CORP
Box: 551625
City: DALLAS TX 75355-1625
Info Phone: 214-271-7361
Emergency Phone Number: 519-942-2333
Preparer's Name: DAVID WORRALL
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CORROSION TECHNOLOGIES CORP.
Address: UNKNOWN
Box: 551625
City: DALLAS TX 75355-1625
Phone: 972-271-7361 FAX 972-278-9721
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50(ORAL,RAT):1400 MG/KG
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE:ESSNTLLY NON-IRRIT, HOWEVER, VAPS &/MISTS CAN
CAUSE MILD TO MOD IRRIT. SEV OF RXN DEPENDS UPON DURATION OF EXPOS &
FIRST AID PROC ADMIN. OVEREXP MAY CAUSE EYES TO BECOME RED & WATERY.
SKIN:ESSNTLL Y NON-IRRIT. PRLNGD/RPTD CONT HAS NOT BEEN CAUSE OF DEFAT/DERM
IN NORMAL DAY TO DAY HNDLG OF MATL. EFTS(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:MAY BE DRY, CHAPPED SKIN.
INHAL:CAN CAUSE IRRIT TO NOSE, THROAT & UPPER RESP TRACT DURING PRLNGD
EXPOS, BUT NOT NORMALLY. EXERCISE CAUTN IF VAPS ARE HOT. IF OVEREXP
OCCURS-MAY CAUSE DIZZ, HD CHS/NAUS. INGEST:MAY BE HARMFUL/FATAL. CAN CAUSE
SEV IRRIT OF MOUTH, THROAT & ESOPHAGUS. CAN CAUSE NAUS, VOMIT,
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN:REMOVE EXCESS BY WIPING & FOLLOW BY WASHING W/SOAP &
WATER UNTIL THERE IS NO ODOR. EYES:FLUSH W/COPIOUS QTYS OF WATER FOR @ LST 15
MIN). LIFT LIDS & FLUSH INSIDE. SEEK MD IF EYES BECOME INFLAMED.
INHAL:EVACUATE TO FRESH AIR. APPLY CPRIF REQ. IF RESUSCITATION IS REQ,
ASSESSMENT BY MD IS MANDATORY. INGEST:DO NOT INDUCE VOMIT. IF VOMIT OCCURS,
TAKE CARE TO PVNT ASPIR. GIVE 1/2 PINT OF
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ELIM IGNIT SOURCES. STOP/REDUCE FLOW BY MEANS OF
DIKE/BARRICADE.ABSORB SM SPILLS USING DRY CLAY/COMMERCIAL ABSORB. COLLECT
RESIDUE INTO SUITABLE CNTNR FOR PROPER DISP. MATL MAY BE WASHED INTO FLOOR DR
AINS EQUIPPED W/OIL INTERCEPTOR.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN AN APPROVED LANDFILL SITE OR INCINERATE
AT A LICENSED WASTE RECLAIMING FACILITY. LIQUID WASTE MAY BE REMOVED BY MEANS
OF A LICENSED RECLAIMER UNDER USED OIL CLASSIFICATION. BE SURE TO FO LLOW ALL
LOCAL, STATE AND FEDERAL REQUIREMENTS.
Handling And Storage Precautions: NONE SPECIFIED BY MANUFACTURER.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: >146F,>63C
Extinguishing Media: CO*2, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures: WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N).
COVER W/EXTING AGENT. DO NOT USE SPRAY W/WATER USING DIRECT STREAM INTO
BURNING LIQ AS THIS MAY SPREAD (SUPDAT)
Unusual Fire/Explosion Hazard: TREAT AS A COMBUSTIBLE LIQUID. DO NOT FLAME CUT,
DRILL OR WELD THE EMTPY CONTAINERS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY NEEDED UNLESS ATOMIZING IN ENCLOSED OR
CONFINED SPACES. USE NIOSH APPROVED ORGANIC MIST VAPOR RESPIRATOR.
Ventilation: PROVIDE SUFFICIENT VENTILATION BY GENERAL OR MECHANICAL MEANS TO
ENSURE THAT EXPOS LEVELS ARE KEPT BELOW COMBUST LIMS.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER
(FP N).
Work Hygienic Practices: WASH FACE & HANDS W/SOAP & WATER AFTER USE, ESP BEFORE
EATING/SMKING/USING RESTROOM FACILITIES. LAUNDER SOILED
Supplemental Safety and Health: USERS OF "L" VERSION CONSULT "LR" FOR ADDNL
INFO (FP N). FIRE FIGHT PROC:FIRE. USE WATER SPRAY/MIST TO COOL FIRE. HAZ
DECOMP PRODS:NITROGEN, SULFUR, PHOSPHOROUS, CALCIUM, SODIUM, ZINC. MAGNESIUM,
HYDR OEN SULFIDE, HYDROGEN CHLORIDE, ALDEHYDES & OTHER PRODS OF
INCOMPLETE COMBUST.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >212F,>100C
Vapor Density: HVR/AIR
Spec Gravity: 0.908 (H*2O=1)
Solubility in Water: INSOLUBLE
Appearance and Odor: LIGHT BROWN LUBRICANT WITH AN OIL FRAGRANCE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: OXIDIZING MATERIALS SUCH AS LIQUID OR COMPRESSED OXYGEN OR
PEROXIDES OR CHLORINES.
Hazardous Decomposition Products: BURNING PRDCES NORMAL BI-PRODS OF COMBUST
INCLUDING:CARBON MONOXIDE, PHENOLS/PETROL PRODS. OXIDES OF CARBON, (SUPP
DATA)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CORROSION X HEAVY-DUTY, (BULK)
Company: CORROSION TECHNOLOGIES CORP.
Street: UNKNOWN
PO Box: 551625
City: DALLAS TX
Zipcode: 75355-1625
Health Emergency Phone: 519-942-2333
Label Required IND: Y
Date Of Label Review: 12/16/1996
Status Code: C
Label Date: 12/16/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:EYE:VAPORS AND OR MISTS CAN CAUSE
MILD TO MODERATE IRRITATION. SEVERITY OF REACTION DEPENDS UPON DURATION OF
EXPOSURE AND FIRST AID PROCEDURES ADMINISTERED. OVEREXPOSURE MAY CAUSE E YES
TO BECOME RED AND WATERY. SKIN:EFFECTS MAY BE DRY, CHAPPED SKIN.
INHALATION:CAN CAUSE IRRITATION TO NOSE AND THROAT AND UPPER RESPIRATORY
TRACT DURING PROLONGED EXPOSURE. IF OVEREXPOSURE OCCURS-MA Y CAUSE DIZZINESS
OR HEADACHE OR NAUSEA. INGESTION:MAY BE HARMFUL IF SWALLOWED.CAN CAUSE SEVERE
IRRITATION OF MOUTH, THROAT AND ESOPHAGUS. CAN CAUSE NAUSEA, VOMITING OR
GASTROINTESTINAL UPSET. MAY CAU SE DIARRHEA. CHRONIC:NONE SPECIFIED BY MFR.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PACIFIC HIGH BUILD
| |
|
PACIFIC STRONG (GLOSS)
| |
|
PACIFIC STRONG (SILKMAT)
| |
|
RM 710EP 6-TEMP EPOXY MORTAR PART A
| 25068-38-6
6809-97-2
100-51-6
1333-86-4 |
|
RM 710EP 6-TEMP EPOXY MORTAR PART B
| 108-95-2
1477-55-0 |
|
RM 710EP 6-TEMP EPOXY MORTAR PART C
| 14808-60-7 |
|
GOLDEN SPECTRO CYCLE GEAR LUBE
| |
|
ALKALINE BUTTON BATTERY
| 7439-97-6
1313-13-9 |
|
HARBOLITE
| 93763-70-3
60676-86-0
1309-37-1
1309-48-4
1305-78-8
12401-86-4
13463-67-7
1314-23-4
1344-43-0 |
|
WATERPROOFING SEALANT
| 64742-94-5 |
|
BROMINATING TABLETS
| 126-06-7
118-52-5
89415-87-2 |
|
SASSAFRAS OIL, 19-11000
| |
|
APTT REAGENT WITH CALCIUM CHLORIDE, 0022926
| 26628-22-8 |
|
NEW-LUBE, NLB 100
| |
|
SEALED LEAD ACID BATTERY
| 7439-92-1
1309-60-0
7446-14-2
7664-93-9 |
|
MIDWEST FASTENER IHA-170 HANGER ADHESIVE, 121723
| 108-88-3 |
|
ALL GUARD PUMP PROTECTOR
| |
|
GLAS-GRIP 636 SE
| 142-82-5
9003-55-8
65997-05-9 |
|
IRON-GRIP 601
| |
|
JOHNSONITE 915
| |
|
STYRENE
| 100-42-5 |
|
A755R
| 67-63-0
84852-15-3
64742-95-6
25085-99-8 |
|
SELBAFLEX GRAY, A765-004
| 25085-99-8
981-40-8
115-86-6
68609-97-2 |
|
138C0927, DEVGRIP 138HR HEAVY DUTY EPOXY (SUPDAT)
| 63231-67-4
64742-95-6
67-56-1 |
|
30-516 TO BLUE MOOD, 30-516BM
| 1332-58-7
13463-67-7
26264-05-1
9002-93-1 |
|
SELBAFLEX FR PART A, A760
| 25085-99-8
115-86-6
68609-97-2 |
|
SELBAFLEX FR PART B, B735
| 1761-71-3
25154-52-3 |
|
420 VOC TEFLON 36375 GRAY, 23T3-103
| 14464-46-1
123-86-4
110-43-0
108-65-6
1344-28-1
71-43-2
7439-92-1 |
|
FMS-1027, 36375, TYPE 5, 18GY013
| |
|
CAT FMS-1027, 36375, TYPE 5, 18GY013CAT
| 4035-89-6
822-06-0
28182-81-2
64742-95-6
123-86-4
763-69-9 |
|
FT TONER TYPE 510 - BLACK, FT5733
| |
|
FT TONER TYPE 510 - BLACK, FT5433
| |
|
FT TONER TYPE 510 - BLACK, FT4427
| |
|
FT TONER TYPE 510 - BLACK, FT4727
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 55 GALLON DRUM
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 5 GALLON PAIL
| |
|
FLAW FINDER AG-1-DH DEVELOPER, 1 GALLON CAN
| |
|
62-3693-8530-7, SCOTCH WELD 460 (PART A) (SUP DAT)
| |
|
SYNTHETIC GEAR LUBRICANT TEGRA ISO 220, CPS233917
| |
|
CORROSION X HEAVY-DUTY, (BULK)
| |
|
CORROSION X HEAVY-DUTY, (AEROSOL)
| |
|
SECAR 80 (FRENCH SOURCE)
| 1344-28-1 |
|
PHOS-CHEK WD881 FIRE SUPPRESSANT FOAM CONCENTRATE
| |
|
KROIL
| |
|
TYPE 248 TONER
| 25767-47-9
58353-09-6
8005-02-5
9003-07-0
1333-86-4
112945-52-5 |
|
HYSOL M-9-N SERIES WHITE INK, XX0018
| |
|
74-6615 PROTOSLO
| |
|
FOG FLUID
| |
|
CUTTING FLUID SULFURIZED FATTY AND MINERAL OILS VV-C-560A
| |
|
BARSOL A-2688
| |
|
|