core wire containing ients 2-5 silver (sara 313) (cercla) copper (sara 313) (cercla) tin zinc (sara 313) (cercla) flux coating containing ients 7-11 soluble fluoride ion; (alkali fluorine fluorate) alkali tetra borate feldspar; (alkali fluoride) potassium metaborate; (boric acid) alkali earth silicate supdat:w/respect to fume plume as well as presence of contaminants in atm ing 12: cleaning & degreasing activities). when electrode is ing 13: in percent & form from s listed. decomp prods of norm ing 14: volatilization/rxn/oxidation of matls listed in section ing 15: reasonably expected fume constituents of prod could incl:oxides ing 16:silicon, titanium, sodium, fluorides. gaseous rxn prods may incl ing 17:be formed by radia from arc. one recd way to determ composition ing 18: are exposed is to take air sample from inside welder's helmet, if vent: train the welder to keep his/her head out of the fumes. eye prot: & full length fshld (fp n). use filter lens w/shade number ing 21: goggles, if necessary, to shield others. other prot equip:& elec shock. see z49.1. at min, incls welder's ing 23 :aprons, hats, shoulder prot as well as dark substantial clthg. hygiene pract:osha pub 2206 (29cfr1910), us govt printing office,
UTP WELDING MATERIALS INC -- UTP 306M
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDWQW
MSDS NAME: UTP 306M
Responsible Party
Name: UTP WELDING MATERIALS INC
Address: 10401 GREENBOUGH
City: STAFFORD TX 77477
Info Phone: 713-499-1212
Emergency Phone Number: 800-527-0791
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: UTP WELDING MATERIALS INC
Address: 10535 S WILCREST DR SUITE 130
Box: 130
City: HOUSTON TX 77099
Phone: (713) 530-1555 OR (800) 527-0791
=======================================================
Ingredients
=======================================================
Name: CORE WIRE CONTAINING INGREDIENTS 2-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 7440-22-4
RTECS #: VW3500000
Name: SILVER (SARA 313) (CERCLA)
% Wt: 55
OSHA PEL: 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-50-8
RTECS #: GL5325000
Name: COPPER (SARA 313) (CERCLA)
% Wt: 21
OSHA PEL: 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2 MG/M3 FUME
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 7440-31-5
RTECS #: XP7320000
Name: TIN
% Wt: 2.5
OSHA PEL: 2 MG/M3
ACGIH TLV: 2 MG/M3
------------------------------
Cas: 7440-66-6
RTECS #: ZG8600000
Name: ZINC (SARA 313) (CERCLA)
% Wt: BALANCE
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Name: FLUX COATING CONTAINING INGREDIENTS 7-11
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 16984-48-8
RTECS #: LM6290000
Name: SOLUBLE FLUORIDE ION; (ALKALI FLUORINE FLUORATE)
% Wt: 66
OSHA PEL: 1 MG/M3
ACGIH TLV: 1 MG/M3
------------------------------
Name: ALKALI TETRA BORATE
% Wt: 22
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 68476-25-5
Name: FELDSPAR; (ALKALI FLUORIDE)
% Wt: 5.3
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 11113-50-1
Name: POTASSIUM METABORATE; (BORIC ACID)
% Wt: 3
OSHA PEL: 10 MG/M3 BORATE
ACGIH TLV: 5 MG/M3 BORATE
------------------------------
Name: ALKALI EARTH SILICATE
% Wt: 3.7
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: SUPDAT:W/RESPECT TO FUME PLUME AS WELL AS PRESENCE OF CONTAMINANTS IN ATM
(IE, CHLORINATED HYDROCARB VAPS FROM
-----------------------------
Name: ING 12: CLEANING & DEGREASING ACTIVITIES). WHEN ELECTRODE IS
CONSUMED, FUME & GAS DECOMP PRODS GENERATED DIFFER
-----------------------------
Name: ING 13: IN PERCENT & FORM FROM INGREDS LISTED. DECOMP PRODS OF NORM
OPERATION INCL THOSE ORIGINATING FROM
-----------------------------
Name: ING 14: VOLATILIZATION/RXN/OXIDATION OF MATLS LISTED IN INGRED SECTION
PLUS THOSE FROM BASE METAL & COATING.
-----------------------------
Name: ING 15: REASONABLY EXPECTED FUME CONSTITUENTS OF PROD COULD INCL:OXIDES
OF IRON, COMPLEX OXIDES OF MANGANESE,
-----------------------------
Name: ING 16:SILICON, TITANIUM, SODIUM, FLUORIDES. GASEOUS RXN PRODS MAY INCL
CO & CO*2. OZONE & NITROGEN OXIDES MAY
-----------------------------
Name: ING 17:BE FORMED BY RADIA FROM ARC. ONE RECD WAY TO DETERM COMPOSITION
& QTY OF FUMES & GASES TO WHICH WORKERS
-----------------------------
Name: ING 18: ARE EXPOSED IS TO TAKE AIR SAMPLE FROM INSIDE WELDER'S HELMET, IF
WORN, OR IN WORKER'S BRTHG ZONE.
-----------------------------
Name: VENT: TRAIN THE WELDER TO KEEP HIS/HER HEAD OUT OF THE FUMES.
-----------------------------
Name: EYE PROT: & FULL LENGTH FSHLD (FP N). USE FILTER LENS W/SHADE NUMBER
10 OR DARKER. PROVIDE PROT SCREENS & FLASH
-----------------------------
Name: ING 21: GOGGLES, IF NECESSARY, TO SHIELD OTHERS.
-----------------------------
Name: OTHER PROT EQUIP:& ELEC SHOCK. SEE Z49.1. AT MIN, INCLS WELDER'S
GLOVES & PROT FSHLD & MAY INCL ARM PROTECTORS,
-----------------------------
Name: ING 23 :APRONS, HATS, SHOULDER PROT AS WELL AS DARK SUBSTANTIAL CLTHG.
TRAIN WELDER NOT TO TOUCH LIVE ELEC PARTS.
-----------------------------
Name: HYGIENE PRACT:OSHA PUB 2206 (29CFR1910), US GOVT PRINTING OFFICE,
WASHINGTON DC 20402 FOR MORE SPEC PROT & PREC INFO.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: HDCHS & NAUS POSS. GASES & FUMES GENERATED WHILE
WELDING MAY BE DANGEROUS TO YOUR HLTH. SHORT-TERM EXPOS MAY RSLT IN
DISCOMFORT SUCH AS DRYNESS/IRRIT IN NOSE/THROAT, IRRIT OF EYES, DIZZ OR NAUS.
ELEC ARC WELDING MAY CREATE ONE OR MORE OF THE FOLLOWING HLTH HAZS: FUMES
& GASES CAN BE DANGEROUS TO YOUR (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: HLTH. ARC RAYS CAN INJURE EYES
& BURN SKIN. ELEC SHOCK CAN KILL. CHRONIC: LONG-TERM EXPOS CAN LEAD TO
SIDEROSIS (IRON DEPOSITS IN THE LUNGS) & MAY AFFECT PULMONARY FUNCTIONS.
WELDING W/THESE PRODS PRDCES CHEMS WHICH ARE KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER & BIRTH DEFECTS/OTHER REPRO HARM.
Medical Cond Aggravated By Exposure: FUMES CAN IRRITATE EYES, LUNGS AND MUCOUS
MEMBRANES. OVEREXPOSURE: PROLONGED EXPOSURE TO FUMES CAN CAUSE LUNG DAMAGE.
INHALING OF FUMES CAN CAUSE HEADACHES AND NAUSEA.
First Aid: INGEST: CALL MD IMMEDIATELY (FP N). EYES: IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD (FP N).
INHAL: REMOVE TO FRESH AIR, SKIN: RINSE WITH PLENTY OF WATER. C AN BE TREATED
WITH COMMERCIAL OINTMENTS. IN AN EMERGENCY MEDICAL HELP IS ADVISED.
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: MATERIAL SHOULD BE USED UP OR DISPOSED OF IN AN
ENVIRONMENTALLY SAFE MANNER. DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS (FP N).
Handling And Storage Precautions: COOL AND DRY STORAGE.
Other Precautions: WHEN WELDING, BRAZING OR SOLDERING: WELDING ARC OR TORCH
FLAMES MAY BE A SOURCE OF IGNITION OF COMBUSTIBLE PRODUCT. AVOID HOLDING FACE
DIRECTLY OVER WORKPIECE. OVERHEATING OF BRAZING ROD CAN CAUSE HAZ ARDOUS
FUMES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: IMPORTANT! (NON-FLAM) WELDING ARC & SPARKS
CAN IGNITE COMBUSTS. REFER TO ANS Z49.1 FOR FIRE PREVENTION & PROT INFO
DURING USE OF WELDING & ALLIED PROCEDURES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH APPROVED RESPIRABLE FUMES RESPIRATOR OR AIR
SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation: USE ENOUGH VENT, LOC EXHST AT ARC OR BOTH TO KEEP FUMES &
GASES BELOW TLVS IN WORKERS BRTHG ZONE & GEN AREA.
Protective Gloves: WELDER'S GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER(FP N). WEAR
HAND, HEAD & BODY PROT WHICH HELPS PVNT INJURY FROM RADIA, SPKS
Work Hygienic Practices: READ & UNDERSTAND MFR'S INSTRUCTIONS & PRECAUTIONARY
LABEL ON PROD. SEE ANS, 2501 NW 7TH ST, MIAMI, FL 33125 &
Supplemental Safety and Health: SOL IN H*2O:FLUX COATING EASILY DISSOLVED. HAZ
DECOMP PRODS:OTHER CNDTNS INFLUENCING COMPOSITION & QTY OF FUMES &
GASES TO WHICH WORKERS MAY BE EXPOS INCL:COATINGS ON METAL BEING WELDED (IE,
PAINT, PL ATING OR GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA,
QUALITY & AMT OF VENT, POSITION OF WELDER'S HEAD
=======================================================
Physical/Chemical Properties
=======================================================
Solubility in Water: SUPDAT
Appearance and Odor: BRAZING ROD YELLOW FLUX COATING, SOLID, NO SPECIFIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: HAS CORRODING EFFECTS ON METALS.
Hazardous Decomposition Products: WELDING FUMES & GASES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION & QTY DEPEND ON METAL BEING WELDED, PROCESS & (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: UTP 306M
Company: UTP WELDING MATERIALS INC
Street: 10535 S WILCREST DR SUITE 130
PO Box: 130
City: HOUSTON TX
Zipcode: 77099
Health Emergency Phone: 800-527-0791
Label Required IND: Y
Date Of Label Review: 06/11/1997
Status Code: C
Label Date: 06/11/1997
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: FUMES AND GASES GENERATED WHILE WELDING MAY BE
DANGEROUS TO YOUR HEALTH. EXPOSURE MAY RESULT IN DISCOMFORT SUCH AS DRYNESS
OR IRRITATION IN THE NOSE OR THROAT, IRRITATION OF EYES, HEADACHES, DI
ZZINESS OR NAUSEA. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN
KILL. CHRONIC: LONG-TERM EXPOSURE CAN LEAD TO SIDEROSIS (IRON DEPOSITS IN THE
LUNGS) AND MAY AFFECT PULMONARY FUNCTIONS. W ELDING WITH THESE PRODUCTS
PRODUCES CHEMICALS WHICH ARE KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER
AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.