Search   
MSDS  : MARK - 370
CAS  :
NAME  : *** proprietary ***
TERMAC CORP INC -- MARK - 370
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGGVM
MSDS NAME: MARK - 370
Responsible Party
Name: TERMAC CORP INC
Address: 7330 TULIP ST
City: PHILADELPHIA PA 19136
Info Phone: 800-255-3924
Emergency Phone Number: 800-255-3924
Preparer's Name: JBR
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: TERMAC CORP INC
Address: 7330 TULIP ST
City: PHILADELPHIA PA 19136
Phone: 800-255-3924
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EFFECTS OF OVER EXPOSURE: CAN CAUSE SEVERE CHEMICAL
BURNS TO SKIN AND EYES. MAY CAUSE BLINDNESS. HARMFUL OR FATAL IF SWALLOWED.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: DERMATITIS.
First Aid: INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP)
(FP N). SKIN:WASH THOROUGHLY WITH WATER. IF IRRITATION PERSISTS SEEK MEDICAL
ADVICE. EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES AND SEEK MEDICAL AID.
INGEST:DO NOT INDUCEVOMITING. GIVE LARGE QUANTITIES OF MILK OR WATER AND SEEK
IMMEDIATE MEDICAL AID.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: FOR SMALL SPILLS, RINSE TO LOCAL DRAINS. FOR LARGER
SPILLS, RECONTAINERIZE BY MOPPING, WET VACUUM, OR BY USING SUITABLE ABSORB.
RINSE REMAINING MATERIAL TO DRAINS. BE CAUTIOUS OF VERY SLIPPERY FLOORS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: FOLLOW LOCAL, STATE, AND FEDERAL GUIDELINES.
Handling And Storage Precautions: STORE BETWEEN 34 AND 120F.
Other Precautions: KEEP OUT OF REACH OF CHILDREN. FOR SALE TO, USE AND STORAGE
BY SERVICE PERSONNEL ONLY.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TOC
Flash Point Text: NONE TO BOILING
Extinguishing Media: WATER, CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: GENERALLY NOT REQUIRED. NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN (FP N).
Ventilation: LOCAL.
Protective Gloves: RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N). RUBBER
APRON.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDITIONAL INFORMATION (FP N). EYE PROT:& FULL LENGTH
FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 212F,100C
Evaporation Rate & Reference: NOT KNOWN
Solubility in Water: COMPLETE
Appearance and Odor: CLEAR COLORLESS LIQUID, MILD ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE.
Materials To Avoid: ACIDS, SOFT METALS SUCH AS ALUMINUM AND ZINC.
Hazardous Decomposition Products: CARBON OXIDES, PHOSPHORUS OXIDES, SODIUM
OXIDES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MARK - 370
Assigned IND: Y
Company: TERMAC CORP INC
Street: 7330 TULIP ST
City: PHILADELPHIA PA
Zipcode: 19136
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 09/08/1997
Status Code: C
Label Date: 09/08/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EFFECTS OF OVER EXPOSURE: CAN CAUSE SEVERE
CHEMICAL BURNS TO SKIN AND EYES. MAY CAUSE BLINDNESS. HARMFUL OR FATAL IF
SWALLOWED. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SRS SURFACE RENEWAL SYSTEM ONE, 82733 25068-38-6
17557-23-2
1344-28-1
68919-79-9
68683-29-4
111-40-0
68610-56-0
98-00-0
80-05-7
7631-86-9
ACIDITY 0.500N, 14330 7664-93-9
7732-18-5
01-D0301-000, PROFESSIONAL LYSOL BRAND (SUPDAT) 112-34-5
75-28-5
3206 HAND UP
2 CYCLE OIL TC-W3, CPS 226477
BALLOTINI IMPACT BEADS 65997-17-3
PHOTOFINISH
PARABOND M-4273 COVE BASE
POLYESTER PHENOLIC RESIN, 9637 64742-95-6
1330-20-7
100-41-4
64742-94-5
111-76-2
50-00-0
554-13-2
95-63-6
98-82-8
2% THORIATED TUNGSTEN ELECTRODES 7440-33-7
1314-20-1
HP C3965A-COLOR DEVELOPER
HP C3967A-PRINT DRUM
PYRALIN POLYIMIDE, PI2723
C2203
ELASO-WATER PROOF WHITE & PASTEL, 70-850/250 124-68-5
9016-45-9
64742-65-0
60676-86-0
107-21-1
26530-20-1
SAFETY ORANGE, PFS500S8055 2451-62-9
13463-67-7
FLAT BLACK, EFB534S0055 25036-25-3
1317-65-3
DEVTHANE 359 H B CONVERTER, DC359C0910 28182-81-2
1330-20-7
123-86-4
822-06-0
71-43-2
100-41-4
MARK - 370
L-620
62-3608-8530-5, SCOTCH-WELD 2216 B/A (SUPDAT)
62-3608-8535-4, SCOTCH-WELD 2216 B/A (SUPDAT)
62-3608-9530-4, SCOTCH-WELD 2216 B/A (SUPDAT)
UNI-WELD SERIES, 2800 109-99-9
78-93-3
67-64-1
108-94-1
9002-86-2
UNI-WELD SERIES, 6200 109-99-9
78-93-3
67-64-1
108-94-1
9002-86-2
UNI-WELD SERIES, 6700 109-99-9
78-93-3
67-64-1
108-94-1
9002-86-2
UNI-WELD SERIES, 303 109-99-9
78-93-3
67-64-1
108-94-1
9002-86-2
UNI-WELD SERIES, 703 109-99-9
78-93-3
67-64-1
108-94-1
9002-86-2
ULTRA-HIDE LATEX FLAT HOUSE PAINT, 9518
RUST LICK B, 73011-1 GAL 102-71-6
141-43-5
111-42-2
RUST LICK B, 73051-5 GAL 102-71-6
141-43-5
111-42-2
RUST LICK B, 73551-55 GAL 102-71-6
141-43-5
111-42-2
62-1357-2631-3, SCOTCH-GRIP 1357 HIGH (SUPDAT) 64742-88-7
67-64-1
9010-98-4
68611-24-5
78-93-3
110-54-3
108-88-3
GS-1
RT-8 81138 DURO TM EXTEND R RUST TREATMENT 112945-52-5
7732-18-5
65045-76-3
7727-43-7
111-76-2
57-55-6
81139 DURO EXTEND RUST TREATMENT 7732-18-5
65045-76-3
7727-43-7
111-76-2
57-55-6
112945-52-5
81137 DURO EXTEND RUST TREATMENT 65045-76-3
7727-43-7
111-76-2
57-55-6
112945-52-5
7732-18-5
RT-12 82073 DURO TM EXTEND R RUST TREATMENT 7732-18-5
57-55-6
107-21-1
64-18-6
100-42-5
TINCTURE BENZOIN 119-53-9
COLORLINK DEVELOPER 7732-18-5
139-88-8
111-90-0
CHLORINE SOLUTION 50-75 MG/L 7782-50-5
7732-18-5
00042 FISHERBRAND ULTRASONIC CLEANING SOLUTION CONCENTRATE 68390-66-9
67-63-0
7732-18-5
PALACOS R
PALACOS FLUSSIGKEIT/STERIL IN AMPULLEN 80-62-6
99-97-8
2820 SANITIZE H/H 68424-85-1
68424-95-3
PRECOAT BRACKET ADHESIVE/UNITEK 14808-60-7
1565-94-2
24448-20-2
7631-86-9
2530-85-0
15523 AMMONIUM PERSULFATE 7727-54-0
HYDROGEN PEROXIDE 3% SOLUTION 7722-84-1
21267 BUFFER REAGENT FOR PC HARDNESS ANALYZER 124-68-5
87-69-4
7732-18-5
3008/7542 SCOTCHBOND MULTIPURPOSE PRIMER 7732-18-5
868-77-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net