POLYMERIC SYSTEMS INC -- PSI-901/RC1 ONE-PART, 600901145
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGPNZ
MSDS NAME: PSI-901/RC1 ONE-PART, 600901145
Responsible Party
Name: POLYMERIC SYSTEMS INC
Address: 723 WHEATLAND ST
City: PHOENIXVILLE PA 19460
Info Phone: 610-935-1170
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Preparer's Name: EDWARD F CLUFF
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: POLYMERIC SYSTEMS, INC.
Address: 723 WHEATLAND STREET
City: PHOENIXVILLE PA 19460
Phone: 610-935-1170
=======================================================
Ingredients
=======================================================
Cas: 123-86-4
RTECS #: AF7350000
Name: ACETIC ACID, BUTYL ESTER; (BUTYL ACETATE) (CERCLA). VP: 15 @ 77F
% Wt: 2.07
OSHA PEL: 150 PPM
ACGIH TLV: 150 PPM/200 STEL
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 26761-40-0
RTECS #: TI1270000
Name: PHTHALIC ACID, DIISODECYL ESTER; (DIISODECYL PHTHALATE)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: INHALTION: SLIGHT NOSE, THROAT, AND RESPIRATORY
IRRITATION POSSIBLE. INGESTION: MAY CAUSE IRRITATION OF INTESTINAL TRACT.
SKIN AND EYE CONTACT: POSSIBLE IRRITATION.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL: REMOVE TO FRESH AIR. INGEST: OBTAIN IMMEDIATE MEDICAL
ATTENTION. DO NOT INDUCE VOMITING. SKIN CONTACT: WASH THOROUGHLY WITH SOAP
AND WATER. EYE CONTACT: FLUSH WITH WATER FOR AT LEAST 15 MINUTES . OBTAIN
IMMEDIATE MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE WITH ABSORBENT MATERIAL OR LET CURE AND
REMOVE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS REGARDING ENVIRONMENTAL CONTROL.
Handling And Storage Precautions: STORE BELOW 80 DEGREES F.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: >100F,>38C
Lower Limits: 1.4%
Upper Limits: 7.5%
Extinguishing Media: FOAM, CO*2, DRY CHEMICALS, SAND.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED. NIOSH APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN (FP N).
Ventilation: GENERAL MECHANICAL: NONE REQUIRED. LOCAL EXHAUST: RECOMMENDED.
Protective Gloves: CHEMICALLY RESIST RUBBER/PLASTIC GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: SEE ING 1
Vapor Density: HVR/AIR
Evaporation Rate & Reference: 1.0 X N-BUTYL ACETATE
Solubility in Water: NOT KNOWN
Appearance and Odor: PASTE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OPEN FLAME, EXTREME HEAT.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: BY FIRE: CO*2, CO, NO*2, SO*2.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PSI-901/RC1 ONE-PART, 600901145
Company: POLYMERIC SYSTEMS, INC.
Street: 723 WHEATLAND STREET
City: PHOENIXVILLE PA
Zipcode: 19460
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 02/10/1998
Status Code: C
Label Date: 02/10/1998
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: INHALTION: SLIGHT NOSE, THROAT, AND
RESPIRATORY IRRITATION POSSIBLE. INGESTION: MAY CAUSE IRRITATION OF
INTESTINAL TRACT. SKIN AND EYE CONTACT: POSSIBLE IRRITATION. CHRONIC: NONE L
ISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.