DYNATRON/BONDO CORP -- MARINE GEL COAT NEUTRAL BASE FOR 3710 GEL-(SU
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGPQD
MSDS NAME: MARINE GEL COAT NEUTRAL BASE FOR 3710 GEL-(SUPDAT)
Kit Part: Y
Responsible Party
Name: DYNATRON/BONDO CORP
Address: 3700 ATLANTA INDUSTRIAL PARKWAY NW
City: ATLANTA GA 30331
Info Phone: 800-241-3386
Emergency Phone Number: 800-424-9300(CHEMTREC)
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: BONDO/MAR-HYDE CORP
Address: 3700 ATLANTA INDUSTRIAL PKWY NW
City: ATLANTA GA 30331
Phone: 404-696-2730
=======================================================
Ingredients
=======================================================
Cas: 25037-66-5
Name: MALEIC ANHYDRIDE, PROPYLENE GLYCOL, PHTHALIC ANHYDRIDE POLYMER;
(UNSATURATED POLYESTER RESIN)
% Wt: >50
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 100-42-5
RTECS #: WL3675000
Name: STYRENE; (STYRENE MONOMER) (SARA 313)
% Wt: 40-45
OSHA PEL: 100 PPM
ACGIH TLV: 50 PPM; 100 STEL, S
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 107-21-1
RTECS #: KW2975000
Name: ETHYLENE GLYCOL (SARA 313) (CERCLA)
% Wt: <5
OSHA PEL: N/K (FP N)
ACGIH TLV: 50 PPM, VAPOR, C
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM OXIDE; (TITANIUM DIOXIDE)
% Wt: <10
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: ACUTE: MAY CAUSE EYE AND SKIN IRRITATION. VAPORS MAY CAUSE
MUCOUS MEMBRANE IRRITATION AND UPPER RESPIRATORY TRACT DISCOMFORT. CHRONIC:
REPEATED EXPOSURE TO HIGH CONCENTRATIONS OF VAPOR MAY CAUSE LIVER AND KIDNEY
DAMAGE.
Explanation Of Carcinogenicity: STYRENE: IARC MONOGRAPHS VOL 60, PG 233, 1994:
GROUP 2B. ANIMAL: BLOOD, SKIN.
Signs And Symptions Of Overexposure: EYES: MAY CAUSE IRRIT. LIQ SPLASHES MAY
RSLT IN MORE SERIOUS INJ. MAY CAUSE TEARING. SKIN: PRLNGD/FREQUENT CONT MAY
CAUSE DEFAT & DRYNESS OF SKIN W/RESULTANT IRRIT & POSS DERM. STYRENE
MAY BE ABSORB T HRU SKIN IN TOX AMTS. INHAL: VAPS MAY CAUSE MUC MEMB IRRIT
& UPPER RESP TRACT DISCOMFORT. HIGH CONCS MAY RSLT IN(SUPDAT)
Medical Cond Aggravated By Exposure: INDIVIDUALS WITH CHRONIC RESPIRATORY
CONDITIONS (I.E., ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA, ETC.) MAY BE
ADVERSELY AFFECTED BY ANY FUME OR AIRBORNE PARTICULATE MATTER EXPOSURE.
First Aid: EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. SEEK
IMMEDIATE MEDICAL AID. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE
VICTIM FROM EXPOSURE. IF UNCONSCIOUS, ADMINISTER ARTIFICIAL RES PIRATION
AND/OR OXYGEN AS NEEDED. SEEK MEDICAL AID. INGESTION: DO NOT INDUCE VOMITING
(ASPIRATION HAZARD). SEEK IMMEDIATE MEDICAL AID.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA.
ABSORB SPILL WITH AN ABSORBENT MATERIAL SUCH AS SAWDUST, VERMICULITE OR SAND
AND PLACE IN CLOSED CONTAINER. IF LARGE SPILL, DIKE AREA TO PREVENT MATERIA L
FROM ENTERING WATER SYSTEMS OR SEWERS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISP I/A/W FED, ST & LOC REGS. IF DISCARDED, MATL
& CNTNRS ARE CONSIDERED RCRA HAZ WASTES BASED ON CHARACT OF IGNITABILITY
(40 CFR 261.21). FOR FURTHER INFO, CONT YOUR ST/LOC SOLID WASTE AGENCY/UNITED
STATE ENVIRON PROT AGENCY'S RCRA HOTLINE (SUPDAT)
Handling And Storage Precautions: AVOID STORAGE ABOVE 100F. AVOID PROLONGED OR
REPEATED SKIN CONTACT. AVOID INHALATION OF VAPORS OR SPRAY MISTS. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 90F,32.2C
Lower Limits: 1.1%
Upper Limits: 6.1%
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL (SMALL FIRES); FOAM AND WATER
FOG (LARGE FIRES).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N). COOL CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard: HIGH TEMP EXPOS FOR EXTENDED PERIODS OF TIME
WILL RSLT IN SPONT UNCONTROLLED EXOTHERMIC POLYM. FL PT 90F,32.2C (STYRENE).
LEL: 1.1%. UEL: 6.1% (STYRENE).
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IF PEL OR TLV
IS EXCEEDED. APPROPRIATE RESPIRATION SELECTION DEPENDS UPON TYPE AND
MAGNITUDE OF EXPOSURE.
Ventilation: GEN VENT IS REQD DURING NORM USE. LOC VENT MAY BE REQUIRED DURING
CERTAIN OPERS TO KEEP EXPOS LEVS BELOW TLV LISTED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N).
POLYVINYL ALCOHOL AND POLYETHYLENE PROT GARMENTS HAVE BEEN RECOM (SUPDAT)
Work Hygienic Practices: WASH HANDS WITH SOAP AND WATER AFTER EVERY USAGE.
Supplemental Safety and Health: BP:293F,145C (STYRENE). VP: 5.2 (STYRENE). VAP
DENS: 3.6 (STYRENE). TRADE NAME/PART #: COAT REPAIR KIT. EFTS OF OVEREXP:
HDCH, NAUS, INSENSIBILITY & OTHER CNS EFTS. INGEST: MAY CAUSE GI DISTURB,
PAIN & DISCOMFORT. WASTE DISP METH: (1-800-424-9346/202-362-3000). OTHER
PROT EQUIP: FOR PROT AGAINST MATLS OF CHEM CLASS.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: SUPP DATA
Vapor Pres: SUPP DATA
Vapor Density: SUPP DATA
Spec Gravity: 1.06
Solubility in Water: NEGLIGIBLE
Appearance and Odor: CLEAR OR WHITE.
Percent Volatiles by Volume: 46
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT AND DIRECT SUNLIGHT.
Materials To Avoid: STRONG ACIDS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: HEATING OF MATERIAL TO DECOMPOSITION MAY
CAUSE EMISSION OF IRRITATING, ACRID FUMES.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: HEAT AND DIRECT SUNLIGHT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MARINE GEL COAT NEUTRAL BASE FOR 3710 GEL-(SUPDAT)
Company: BONDO/MAR-HYDE CORP
Street: 3700 ATLANTA INDUSTRIAL PKWY NW
City: ATLANTA GA
Zipcode: 30331
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 02/17/1998
Status Code: C
Label Date: 02/17/1998
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Severe
Reactivity Hazard: Slight
Hazard And Precautions: FLAMMABLE. HAZARDOUS POLYMERIZATION MAY OCCUR. ACUTE:
EYE: IRRITATION, POSSIBLE SERIOUS INJURY, TEARING. SKIN: IRRITATION,
DEFATTING, DRYING AND DERMATITIS. INHALATION: MUCOUS MEMBRANE IRRITATION AND
UPPER RESPIRATORY TRACT DISCOMFORT. HEADACHE, NAUSEA, INSENSIBILITY AND OTHER
CNS EFFECTS. INGESTION: GI DISTURB, PAIN AND DISCOMFORT. CHRONIC: CANCER
HAZARD. CONTAINS STYRENE WHICH IS LISTED AS AN AN IMAL BLOOD AND SKIN
CARCINOGEN (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
H28012, SINGLE ELEMENT SOLUTION STANDARD, (SUP DAT)
| 13138-45-9
7697-37-2
7732-18-5 |
|
D28812, SINGLE ELEMENT SOLUTION STANDARD, (SUP DAT)
| 13138-45-9
7697-37-2
7732-18-5 |
|
H28812, SINGLE ELEMENT SOLUTION STANDARD, (SUP DAT)
| 13138-45-9
7697-37-2
7732-18-5 |
|
A2825, SINGLE ELEMENT SOLUTION STANDARD, (SUP DAT)
| 13138-45-9
7697-37-2
7732-18-5 |
|
SYNLUBE TG-50 (BULK & TUBES), 1141
| |
|
SYNLUBE TG-50 (BULK & TUBES), 1142A
| |
|
SYNLUBE TG-50 (BULK & TUBES), 1142C
| |
|
SYNLUBE TG-50 (BULK & TUBES), 1142D
| |
|
UV STRCTL ADH 352 10 CC BO, 17177
| |
|
DYSOL
| 68439-46-3
69727-21-0
64-02-8 |
|
PSI-901/RC1 ONE-PART, 600901145
| 123-86-4
26761-40-0 |
|
GREASE ATTACK
| 22-22-4 |
|
RENOWN ANTISEPTIC, 00181061
| |
|
CLARIFLOC C-1005 COAGULANT
| 10043-01-3 |
|
ILLOXAN 3EC HERBICIDE
| 51338-27-3
1330-20-7
100-41-4
108-94-1 |
|
EPOXYLITE 8117 PART A
| |
|
EPOXYLITE 8117 PART B
| |
|
MARINE GEL COAT NEUTRAL BASE FOR 3710 GEL-(SUPDAT)
| 25037-66-5
100-42-5
107-21-1
13463-67-7 |
|
MARINE GEL COAT WHITE BASE FOR 3710 GEL-COAT (SUPDAT)
| 25037-66-5
100-42-5
107-21-1
13463-67-7 |
|
ELLANAR SILVER POLISH & TARNISH BARRIER, 168
| 7732-18-5
64741-65-7
102-71-6
61790-59-2
57-11-4
2885-00-9 |
|
ELLANAR SILVER POLISH & TARNISH BARRIER, 177
| 7732-18-5
64741-65-7
102-71-6
61790-59-2
57-11-4
2885-00-9 |
|
ELLANAR SILVER POLISH & TARNISH BARRIER, 179
| 7732-18-5
64741-65-7
102-71-6
61790-59-2
57-11-4
2885-00-9 |
|
PPC TONER TYPE 810, 887447
| |
|
SUPERFLO ATF, 211960-01960
| |
|
PV34LR
| 25852-37-3
80-62-6 |
|
ALUMA-HYDE II GLOSS BLACK
| |
|
8614 BOOT TOP RED, PET00131DE9100
| 64742-88-7
13463-67-7
1333-86-4 |
|
PLASTIC POWDER CONTAINING PIGMENTS
| 25068-63-7
68002-19-7
13463-67-7
18454-12-1
12626-36-7 |
|
DICO-WRI
| 1344-28-1 |
|
DICO-TC6
| 1317-95-9 |
|
EASY FINISH RUBBING COMPOUND FOR MARINE (SUPDAT)
| 8008-20-6
8006-39-1
61790-12-3
14808-60-7 |
|
DIPAK E-2889A
| 9042-82-4 |
|
DIPAK E-2889B
| |
|
DIPAK 3-2888A
| 9042-82-4 |
|
DIPAK E-2888B
| |
|
AMTECH SOLDER CREAM, 200
| |
|
AMTECH SOLDER CREAM, 300
| |
|
AMTECH SOLDER CREAM, 400
| |
|
AMTECH SOLDER CREAM, 500
| |
|
INTEC/PERMAGLAS ULTRA CAP
| 65997-17-3
8052-42-4
16389-88-1
14808-60-7 |
|
INTEC/PERMAGLAS TOUGH PLY IV
| 65997-17-3
8052-42-4
16389-88-1
14808-60-7 |
|
TURFGO BETASAN 4-E TURF HERBICIDE
| 741-58-2
64742-95-6
1330-20-7
95-63-6
98-82-8
100-41-4 |
|
SAIL PINK LIQUID DISHWASH
| |
|
2000 MOLDABLE PACKING
| 1314-13-2 |
|
2500 ALL PURPOSE LUBRICANT & SEALANT
| 1314-13-2 |
|
DELSTAR ACRYLIC ENAMEL
| 100-41-4
108-88-3
1330-20-7
13463-67-7
64742-88-7
64742-95-6
68511-62-6
78-93-3
8052-41-3
95-63-6
98-54-4 |
|
PRIMER, 200
| 108-65-6
78-93-3
64-17-5
1330-20-7
71-36-3
88917-22-0
100-41-4 |
|
628-VT
| |
|
HYDROGEN PEROXIDE 3%
| 7722-84-1
7732-18-5 |
|
EASY-FLO 3
| 7440-43-9
7440-50-8
7440-02-0
7440-22-4
7440-66-6 |
|
|