methacrylic acid, polymer with ethylene; (ethylene methacrylic acid dark gray pigment zinc stearate first aid proc: eye & eyelids. seek med attn if irrit occurs. skin: ing 4: remove & clean any contam clthg & shoes. seek med attn if ing 5: seek medical attention if respiratory irritation occurs or if
PFS THERMOPLASTIC POWDER COATI -- POLYARMOR DARK GRAY
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CHTWD
MSDS NAME: POLYARMOR DARK GRAY
Responsible Party
Name: PFS THERMOPLASTIC POWDER COATINGS
Address: 3400 WEST 7TH
City: BIG SPRING TX 79720
Info Phone: 915-263-5263
Emergency Phone Number: 800-753-5263
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PLASTIC FLAMECOAT(R) SYSTEMS, INC.
Address: 3400 WEST 7TH
City: BIG SPRING TX 79720
Phone: 800-753-5263
=======================================================
Ingredients
=======================================================
Cas: 25053-53-6
Name: METHACRYLIC ACID, POLYMER WITH ETHYLENE; (ETHYLENE METHACRYLIC ACID
COPOLYMER)
% Wt: 0-100
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: DARK GRAY PIGMENT
% Wt: 0-10
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 557-05-1
RTECS #: ZH5200000
Name: ZINC STEARATE
% Wt: 1.4
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: N/K (FP N)
------------------------------
Name: FIRST AID PROC: EYE & EYELIDS. SEEK MED ATTN IF IRRIT OCCURS. SKIN:
FLUSH W/PLENTY OF WATER FOR SEVERAL MIN.
-----------------------------
Name: ING 4: REMOVE & CLEAN ANY CONTAM CLTHG & SHOES. SEEK MED ATTN IF
IRRIT OCCURS. INHAL: REMOVE TO FRESH AIR.
-----------------------------
Name: ING 5: SEEK MEDICAL ATTENTION IF RESPIRATORY IRRITATION OCCURS OR IF
BREATHING BECOMES DIFFICULT.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: NUISANCE DUSTS ARE NOT EXPECTED TO CAUSE
SIGNIFICANT ORG DISEASE/TOX EFTS WHEN EXPOS ARE CONTROLLED TO LIMS STATED.
ACGIH SUGGESTS THAT EXCESS CONCS OF NUISANCE PARTICULATES IN WORKPLACE "MAY S
ERIOUSLY REDUCE VISIBILITY, MAY CAUSE UNPLEASANT DEPOSITS IN EYES & NASAL
PASSAGES/CAUSE INJURY TO (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: SKIN/MUC MEMBS BY CHEM/MECH
ACTION PER SE/BY RIGOROUS SKIN CLEANSING PROC NEC FOR THEIR REMOVAL". INHAL:
MAY CAUSE IRRIT TO UPPER RESP TRACT. SKIN: MAY CAUSE IRRIT & ALLERGIC
REACTION. INGES T: NOT LIKELY. MAY CAUSE IRRIT TO GI TRACT. EYES: MAY CAUSE
IRRIT.
Medical Cond Aggravated By Exposure: NO MEDICAL CONDITIONS ARE GENERALLY KNOWN
TO BE AGGRAVATED BY EXPOSURE.
First Aid: IF ADVERSE RXN OCCURS AFTER EXPOS, PROMPTLY START REC PROC BELOW.
SEEK MED ATTN IF FURTHER TREATMENT IS REQUIRED. INGEST: IF LGE AMT SWALLOWED,
GIVE SEVERAL GLASSES OF WATER. CONT MED PERS FOR FURTHER ASSIST. IF
UNCON/CONVULSING, DO NOT GIVE ANYTHING BY MOUTH. EYES: FLUSH W/PLENTY OF
RUNNING WATER FOR AT LEAST 15 MIN. HOLD EYELIDS APART DURING FLUSHING TO
ENSURE RINSING OF ENTIRE SURF OF
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: NOTE: REVIEW FIREFIGHTING MEASURES AND HANDLING
(PERSONNEL) SECTIONS BEFORE PROCEEDING WITH CLEANUP. USE APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT DURING CLEANUP. SWEEP UP TO AVOID SLIPPING HAZARD.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: PREF OPTIONS FOR DISP ARE (1) RECYCLING, (2) INCIN
W/ENERGY RECOVERY, & (3) LANDFILL. HIGH FUEL VALUE OF THIS PROD MAKES
OPTION 2 VERY DESIRABLE FOR MATL THAT CANNOT BE RECYCLED. TREATMENT, STOR,
TRAN SPORTATION & DISP MUST BE I/A/W APPLIC (SUP DAT)
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION AND ACCUMULATION OF MOISTURE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Lower Limits: 30 G/M3
Extinguishing Media: WATER, FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). PRODUCTS OF COMBUSTION MAY BE TOXIC; AVOID BREATHING FUMES.
COOL FIRE-EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard: DUST CAN FORM AN EXPLOSIVE MIXTURE WITH AIR.
ELIMINATION OF SOURCES OF IGNITION IS ESSENTIAL.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE A NIOSH APPROVED RESPIRATOR EQUIPPED WITH THE
APPROPRIATE FILTER FOR PARTICULATE DUST EXPOSURE.
Ventilation: LOCAL VENTILATION SHOULD BE USED OVER PROCESSING EQUIPMENT.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N). LONG SLEEVE COTTON SHIRT & LONG PANTS REC.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: HAZ DECOMP PROD: PRODS OF COMBUST IN PRESENCE
OF LGE AMTS OF AIR. PRODS OF POORLY VENTILATED COMBUST ARE UNCHARACTERIZED
MIXT OF ORG CMPDS. MIXT WILL BE AS HAZ AS NORM FIRE GASES ASSOC W/POORLY
VENTIL ATED COMBUST. WASTE DISP METH: FED, STATE, & LOC REGS.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: >176F,>80C
Spec Gravity: >0.93
Solubility in Water: NEGLIGIBLE
Appearance and Odor: DARK GRAY FINELY DIVIDED POWDER WITH MILD METHACRYLIC ACID
ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MATLS ARE NORM STABLE & DECOMPOSE ONLY IN
EXTREME CASES SUCH AS FIRE. OXIDES OF NITROGEN & CARBON ARE EXPECTED (SUP
DAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: POLYARMOR DARK GRAY
Company: PLASTIC FLAMECOAT(R) SYSTEMS, INC.
Street: 3400 WEST 7TH
City: BIG SPRING TX
Zipcode: 79720
Health Emergency Phone: 800-753-5263
Label Required IND: Y
Date Of Label Review: 08/11/1998
Status Code: C
Label Date: 08/11/1998
Origination
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: NUISANCE DUSTS ARE NOT EXPECTED TO CAUSE
SIGNIFICANT ORGANIC DISEASE/TOXIC EFFECTS WHEN EXPOSURES ARE CONTROLLED TO
LIMITS STATED. ACGIH SUGGESTS THAT EXCESSIVE CONCENTRATIONS OF NUISANCE PARTI
CULATES IN WORKPLACE "MAY SERIOUSLY REDUCE VISIBILITY, MAY CAUSE UNPLEASANT
DEPOSITS IN EYES & NASAL PASSAGES/CAUSE INJURY TO SKIN/MUCOUS MEMBRANES
BY CHEMICAL/MECHANICAL IRRITATION PER SE/BY RIGOROUS CLEANSING PROCEDURES
NEEDED FOR THEIR REMOVAL." INHALATION: MAY IRRITATE UPPERRESPIRATORY TRACT.
SKIN: MAY CAUSE IRRITATION & ALLERGIC REACTION. INGESTION: MAY IRRITATE
GI TRACT. EYES: MAY CAUSE IRRI TATION. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.