Search   
MSDS  : 0145040 SPEEDECK-CLEAR BASE
CAS  :
NAME  :
MOBILE PAINT MANUFACTURING CO -- 0145040 SPEEDECK-CLEAR BASE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJKDG
MSDS NAME: 0145040 SPEEDECK-CLEAR BASE
Responsible Party
Name: MOBILE PAINT MANUFACTURING CO
Address: HAMILTON BLVD
Box: 717
City: THEODORE AL 36590
Info Phone: 205-653-0110
Emergency Phone Number: 800-255-3924
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MOBILE PAINT MANUFACTURING CO
Address: HAMILTON BLVD
Box: 717
City: THEODORE AL 36590
Phone: 205-653-0110
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: ANESTHETIC. IRRITATION OF THE RESPIRATORY
TRACT/NERVOUS SYSTEM DEPRESSION. ASPHYXIATION. SKIN: MODERATE IRRITATION,
DERMATITIS, SENSITIZER IN SOME INDIVIDUALS. EYES: SEVERE IRRITATION, BLU RRED
VISION. LIQUID CAN BE ABSORBED THROUGH THE SKIN. INGESTION: GASTROINTESTINAL
IRRITATION. ASPIRATION INTO THE LUNGS DURING INGESTION/BY VOMITING MAY CAUSE
MILD TO SEVERE PULMONARY INJURY & POSSIBL E DEATH. REPEATED/PROLONGED
OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS MAY BE HARMFUL/FATAL.
Signs And Symptions Of Overexposure: IRRITATION, HEADACHE, DIZZINESS,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, COMA, ASPHYXIATION, DEFATTING,
REDNESS, TEARING, BLURRED VISION, NAUSEA, VOMITING, DIARRHEA
Medical Cond Aggravated By Exposure: PREEXISTING DERMATITIS.
First Aid: INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS
DIFFICULT. RESTORE BREATHING IF NECESSARY. TREAT SYMPTOMATICALLY. SKIN: WASH
W/SOAP & WATER. EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR 15
MINS. INGESTION: DRINK 1-2 GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. AVOID BREATHING
VAPORS. VENTILATE AREA. CONTAIN & REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.
Waste Disposal Methods: INCINERATE IN APPROVED FACILITY. DON'T INCINERATE
CLOSED CONTAINERS. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.
Handling And Storage Precautions: DON'T STORE >120F. STORE LARGE QUANTITIES
ONLY IN BUILDINGS DESIGNED TO COMPLY W/OSHA 1910.106. KEEP CLOSURES TIGHT
& CONTAINER UPRIGHT TO PREVENT LEAKAGE. DON'T STORE/USE NEAR HEAT,
SPARKS/FLAME. NEV ER USE PRESSURE TO EMPTY, DRUM MUST NOT BE WASHED OUT/USED
FOR OTHER PURPOSES.
Other Precautions: GROUND DRUMS WHEN POURING. AVOID SKIN & EYE CONTACT.
PREVENT PROLONGED/REPEATED BREATHING OF VAPORS/SPRAY MIST & SANDING DUST.
CLOSE CONTAINERS AFTER EACH USE. DON'T TRANSFER THIS PRODUCT TO UNLABELE D
CONTAINERS. DON'T HANDLE UNTIL SAFETY PRECAUTIONS HAVE BEEN READ &
UNDERSTOOD. KEEP OUT OF CHILDRE NS REACH.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 100-109F
Lower Limits: 0.9
Upper Limits: 7
Extinguishing Media: FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures: USE FULL PROTECTIVE EQUIPMENT INCLUDING SELF
CONTAINED BREATHING APPARATUS. WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE, WATER MAY BE USED TO COOL CLOSED CONTAINERS
TO PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. APPLICATION TO HOT SURFACES REQUIRES SPECIAL PRECAUTIONS.
ISOLATE FROM HEAT, SPARKS & OPEN FLAME.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR/OPEN AREAS USE NIOSH/MSHA APPROVED
MECHANICAL FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES. IN
RESTRICTED VENTILATION AREAS, USE NIOSH/MSHA APPROVED CHEMICAL-MECHANICAL
FILTERS DESI GNED TO REMOVE A COMBINATION OF PARTICULATE & GAS/VAPOR. IN
CONFINED AREAS, USE NIOSH/MSHA APPROVED AIR LINE TYPE RESPIRATORS/HOODS.
Ventilation: SHOULD BE IAW/OSHA REGULATION 29 CFR 1910.94, 1910.107, 1910.108.
TO REMOVE DECOMPOSITION PRODUCTS FORMED DURING WELDING/FLAME CUTTING
Protective Gloves: RECOMMENDED
Eye Protection: SAFETY EYEWEAR, SPLASH GUARDS/SIDE SHIELDS
Other Protective Equipment: PROTECTIVE OUTER-WEAR
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES BEFORE
REUSE. WASH SKIN THOROUGHLY BEFORE BREAKS & MEALS & AT END OF WORK PERIOD.
Supplemental Safety and Health: AVOID BREATHING VAPORS & CONTACT W/SKIN.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =148.9C, 300.F
Vapor Density: >1
Spec Gravity: 1.1
VOC Pounds/Gallon: 3.69
VOC Grams/Liter: 442
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: NEGLIGIBLE
Appearance and Odor: TYPICAL PAINT SOLVENT ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HIGH TEMPERATURES
Materials To Avoid: OXIDIZING MATERIALS
Hazardous Decomposition Products: HAZARDOUS FUMES
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
Other Information: THE INFORMATION PROVIDED IN THIS MSDS HAS BEEN OBTAINED FROM
SOURCES BELIEVED TO BE ACCURATE & RELIABLE. IT IS FURNISHED W/OUT
WARRANTY OF ANY KIND, EXPRESS/IMPLIED. RECIPIENTS SHOULD DETERMINE THAT T HE
INFORMATION IS CORRENT & SUITABLE FOR THE PROTECTION OF THE ENVIRONMENT
& THE HEALTH & SAFETY OF YOUR EMPLOYEES & USERS OF THIS PRODUCT.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 0145040 SPEEDECK-CLEAR BASE
Company: MOBILE PAINT MANUFACTURING CO
Street: HAMILTON BLVD
PO Box: 717
City: THEODORE AL
Zipcode: 36590
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: INHALATION: ANESTHETIC. IRRITATION OF THE RESPIRATORY
TRACT/NERVOUS SYSTEM DEPRESSION. ASPHYXIATION. SKIN: MODERATE IRRITATION,
DERMATITIS, SENSITIZER IN SOME INDIVIDUALS. EYES: SEVERE IRRITATION, BLU RRED
VISION. LIQUID CAN BE ABSORBED THROUGH THE SKIN. INGESTION: GASTROINTESTINAL
IRRITATION. ASPIRATION INTO THE LUNGS DURING INGESTION/BY VOMITING MAY CAUSE
MILD TO SEVERE PULMONARY INJURY & POSSIBL E DEATH. REPEATED/PROLONGED
OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS MAY BE HARMFUL/FATAL.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
EPOXYLITE # 478-LV2
PERFECT SOLUTION
FERROIN, INDICATOR, LC14450 7732-18-5
5144-89-8
7782-63-0
GLOSS BLACK, 1979 730
HELIUM, REFRIGERATED LIQUID, G-98 7440-59-7
CF STARTER K1, CF900
PHOTOCONDUCTOR, CF900
RESISORB-MERCURY VAPOR ABSORBENT, 4455
CF TONER K1, CF900
VVO NEOPHAX A REGULAR 68152-90-9
64742-52-5
SCOTCH-WELD DP-105 PART A CLEAR EPOXY ADHESIVE
SCOTCH-WELD DP-105 PART B CLEAR EPOXY ADHESIVE 30583-72-3
25068-38-6
2530-83-8
FOSTER 32-57
EP MULTIGUARD HARDENER, 7461B
SIGMAGUARD EHB HARDENER, 7433B
BRINKMANN'S SMOKER'S BLEND BRIQUETS
TM83708 HYSIL NC 74-98-6
64741-66-8
8042-47-5
63148-62-9
5103135, HAMMENTE-SMOOTH BRIGHT YELLOW QUICK (SUPDAT)
CLIPPER VARNISH CLEAR, 95 64742-95-6
8032-32-4
64742-88-7
25973-55-1
BULLETIN COLOR, 162 PURPLE
ALL PRO DIAZINON 4E INSECTICIDE
HAMMERITE - HAMMERED RED QUICK DRY METAL FINISH, 5000540
BLACK URETHANE SUB PART A, 13910
BLACK URETHANE SUB PART B, 13-911
FLAKES/CHIPS 108-05-4
7727-43-7
14807-96-6
13845-36-8
13463-67-7
1333-86-4
7440-50-8
SAE/AMS 1424B-97 TYPE I
CARBON DIOXIDE, GAS 124-38-9
ABRASIVE CUT-OFF WHEELS 811-043-010 1344-28-1
14808-60-7
65997-17-3
ABRASIVE CUT-OFF WHEELS 811-073-010 1344-28-1
14808-60-7
65997-17-3
PLSE2-3X, PLASMA STANDARD, 10,000 PPM OF (SUPDAT)
0145040 SPEEDECK-CLEAR BASE
VCI-238 AEROSOL
PREVOX 2070100/WILLIAMS LITE-KING LIQUID 2257000 7664-38-2
7778-50-9
57-13-6
7732-18-5
PREPARATIONS CONTAINING SODIUM AZIDE 26628-22-8
ATLAS RELEASE AGENT 64-17-5
9002-89-5
7732-18-5
ABRASIVE CUT-OFF WHEELS 811-089-010 1344-28-1
14808-60-7
65997-17-3
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39745 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
HUMISEAL 1B15H AEROSOL
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39624 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39638 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39641 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39643 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39647 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39651 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
ABRASIVE CUT-OFF WHEELS 811-095-010 1344-28-1
14808-60-7
65997-17-3
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39752 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
HP C3965A BLACK DEVELOPER
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39756 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7
CEE BEE A-882
ABRASIVE CUT-OFF WHEELS 585-269 1344-28-1
14808-60-7
65997-17-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net