Search   
MSDS  : IRM 903
CAS  : 64742-52-5
NAME  : distillates (petroleum), hydrotreated heavy naphthenic; (heavy naphthenic
PENRECO -- IRM 903
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJYCY
MSDS NAME: IRM 903
Responsible Party
Name: PENRECO
Address: 4426 EAST WASHINGTON BOULEVARD
City: LOS ANGELES CA 99023-4411
Info Phone: 800-546-6227
Emergency Phone Number: 800-546-6040
Resp. Party Other MSDS No.: 010593
Preparer's Name: ENVIRON, SAFETY & HEALTH
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PENRECO
Address: 4426 EAST WASHINGTON BOULEVARD
City: LOS ANGELES CA 99023-4411
Phone: 800-546-6227
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 64742-52-5
RTECS #: PY8035000
Name: DISTILLATES (PETROLEUM), HYDROTREATED HEAVY NAPHTHENIC; (HEAVY NAPHTHENIC
HYDROTREATED DISTILLATE)
Percent by Wt: 100.
Other REC Limits: N/K (FP N)
OSHA PEL: N/K (FP N)
OSHA STEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
ACGIH STEL: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: PRACTICALLY NON-IRRITATING TO EYES UPON DIRECT CONT,
BASED ON TESTING OF SIMILAR PRODS &/OR COMPONENTS. SKIN: AVOID CONT. MAY
CAUSE SLIGHT IRRIT UPON DIRECT CONT, BASED ON TESTING OF SIMILAR PRO DS
&/OR COMPONENTS. PRLNG/RPTD CONT MAY RSLT IN CONT DERM WHICH IS
CHARACTERIZED BY DRYNESS, CHAPPING, & REDDENING. THIS CNDTN MAY MAKE SKIN
MORE SUSCEPTIBLE TO OTHER IRRITANTS, SENSITIZERS, & DISEASE . PRLNG/RPTD
CONT MAY RSLT IN OIL ACNE WHICH IS CHARACTERIZED BY BLACKHEADS W/POSS
SECONDARY INFECTION. SEE HLTH DATA SECTION BELOW. INHAL: PROD HAS LOW VAP
PRESS & IS NOT EXPECTED TO PRESENT INHAL HA Z AT AMBIENT CNDTNS. (EFTS OF
OVEREXP)
Explanation Of Carcinogenicity: IARC HAS CONCLUDED THAT HIGHLY REFINED MINERAL
OILS ARE GROUP 3 SUBSTANCES, "NOT CLASSIFIABLE AS TO THEIR CARCINOGENICITY TO
HUMANS", BASED ON INADEQUATE HUMAN AND INADEQUATE ANIMAL EVIDENCE. THIS SUB
STANCE IS NOT CARCINOGENIC ACCORDING TO THE OSHA HAZARD COMMUNICATION
STANDARD.
Signs And Symptions Of Overexposure: HLTH HAZ: CAUTION SHOULD BE TAKEN TO PVNT
AEROSOLIZATION/MISTING OF PROD. PEL & TLV FOR PROD AS OIL MIST IS 5
MG/M3. EXPOS BELOW 5 MG/M3 APPEAR TO BE W/OUT SIGNIFICANT HLTH RISK.
SHORT-TERM EXPOS LIM FOR PROD AS OIL MIST IS 10 MG/M3. INGEST: DO NOT
INGEST. PROD IS RELATIVELY NON-TOX BY INGEST. PROD HAS LAXATIVE PROPERTIES
& MAY RSLT IN ABDOM CRAMPS & DIARR. SEE HLTH DATA SECTION BELOW. HLTH
DATA: ON RARE OCCASIONS, PRLNG & RPTD EXPOS TO OIL MIST POSES RISK OF
PULM DISEASE SUCH AS CHRONIC LUNG INFLAMM. THIS CNDTN IS USUALLY ASYMPTOMATIC
AS A RESULT OF RPTD SML ASPIRATIONS. SHORTNESS OF BREATH & COUGH ARE
MOST COMMON SYMPS.
First Aid: EYES: IMMED FLUSH W/LARGE AMOUNTS OF WATER & CONTINUE FLUSHING
UNTIL IRRIT SUBSIDES (AT LEAST 15 MINUTES). IF MATERIAL IS HOT, TREAT FOR
THERMAL BURNS & TAKE TO HOSPITAL IMMED. SKIN: REMOVE CONTAMINAT ED
CLOTHING. WASH CONTAMINATED AREA THORO W/SOAP & WATER. IF REDNESS/IRRIT
OCCURS, SEEK MED ATTN. IF MATERIAL IS HOT, SUBMERGE INJURED AREA IN COLD
WATER. IF SEVERELY BURNED, REMOVE TO HOSPITAL IMMED. INHAL: THIS MATERIAL
HAS LOW VAPOR PRESSURE & IS NOT EXPECTED TO PRESENT INHAL EXPOS AT
AMBIENT CONDITIONS. REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) (FP N). INGEST: DO NOT INDUCE VOMITING. SEEK
MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONSULT HLTH EFTS INFO, PERS HLTH PROT INFO, FIRE
PROT INFO, & REACTIVITY DATA. NOTIFY APPROP AUTHS OF SPILL. CONTAIN SPILL
IMMED. DO NOT ALLOW SPILL TO ENTER SEWERS/WATERCOURSES. REMOVE ALL SOURCES O
F IGNIT. ABSORB W/APPROP INERT MATL SUCH AS SAND, CLAY, ETC. LGE SPILLS MAY
BE PICKED UP USING VACUUM PUMPS, SHOVELS, BUCKETS/OTHER MEANS & PLACED IN
DRUMS/OTHER SUITABLE CONTRS.
Waste Disposal Methods: ALL DISPS MUST COMPLY W/FED, STATE, & LOC REGS.
MATL, IF SPILLED/DISCARDED, MAY BE REGULATED WASTE. REFER TO STATE & LOC
REGS. CAUTION! IF REGULATED SOLVS ARE USED TO CLEAN UP SPILLED MATL,
RESULTING WASTE MIXT MAY BE REGULATED. DOT REGS MAY APPLY FOR TRANSPORTING
MATL WHEN SPILLED. (SUP DAT)
Handling And Storage Precautions: DO NOT TRANSFER TO UNMARKED CONTAINERS. STORE
IN CLOSED CONTAINERS AWAY FROM HEAT, SPARKS, OPEN FLAME/OXIDIZING MATERIALS.
PRODUCT IS NOT CLASSIFIED AS HAZARDOUS UNDER DOT REGULATIONS. FIRE EXTINGUISH
ERS SHOULD BE KEPT READILY AVAILABLE. SEE NFPA 30 & OSHA
1910.106--FLAMMABLE & COMBUSTIBLE LIQUIDS.
Other Precautions: MIXTURE MAY BE FORMULATED IN PART W/COMPONENTS PURCHASED
FROM OTHER COMPANIES. IN MANY INSTANCES, ESPECIALLY WHEN PROPRIETARY/TRADE
SECRET MATERIALS ARE USED, PENNZOIL COMPANY MUST RELY UPON HAZARD EV ALUATION
OF SUCH COMPONENTS SUBMITTED TO PENNZOIL BY THAT PRODUCT'S MFR/IMPORTER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: >150.C, 302.F
Extinguishing Media: USE DRY CHEMICAL, FOAM, OR CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS AND FULL PROTECTIVE EQUIPMENT (FP N). WATER MAY BE INEFFECTIVE BUT
CAN BE USED TO COOL CONTAINERS EXPOSED TO HEAT OR FLAME. CAUTION SHOULD BE
EXE RCISED WHEN USING WATER OR FOAM AS FROTHING MAY OCCUR, ESPECIALLY IF
SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID.
Unusual Fire/Explosion Hazard: DENSE SMOKE MAY BE GENERATED WHILE BURNING.
CARBON MONOXIDE, CARBON DIOXIDE, AND OTHER OXIDES MAY BE GENERATED AS
PRODUCTS OF COMBUSTION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: RESPIRATORY PROTECTION IS NOT REQUIRED UNDER CONDITIONS
OF NORMAL USE. IF VAPOR OR MIST IS GENERATED WHEN THE MATERIAL IS HEATED OR
HANDLED, USE AN ORGANIC VAPOR RESPIRATOR WITH A DUST AND MIST FILTER . ALL
RESPIRATORS MUST BE NIOSH CERTIFIED. DO NOT USE COMPRESSED OXYGEN IN
HYDROCARBON ATMOSPHERES.
Ventilation: IF VAP/MIST IS GENERATED WHEN MATL IS HEATED/HANDLED, ADEQ VENT
I/A/W GOOD ENGINEERING PRACTICE MUST BE PROVIDED TO MAINTAIN CONCS BELOW (SUP
DAT)
Protective Gloves: IMPERVIOUS GLOVES FOR PROLONGED OR REPEATED EXPOSURES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: EYEWASH & DELUGE SHWR MTG ANSI DESIGN CRITERIA(FP
N). NO SKIN PROT IS REQ FOR SINGLE, SHORT DURATION EXPOS. FOR PRLNG/RPTD
EXPOS, USE IMPERVIOUS (BOOTS, APRONS, ETC) OVER PARTS OF BODY SUBJECT (SUP
DAT)
Work Hygienic Practices: CONSUMPTION OF FOOD & BEVERAGE SHOULD BE AVOIDED IN
WORK AREAS WHERE HYDROCARBONS ARE PRESENT. ALWAYS WASH HANDS & FACE W/SOAP &
WATER BEFORE EATING, DRINKING/SMOKING. (OTHER INFO)
Supplemental Safety and Health: WASTE DISPOSAL METHOD: WASTE MATERIAL MAY BE
LANDFILLED/INCINERATED AT APPROVED FACILITY. MATERIALS SHOULD BE RECYCLED IF
POSS. -- VENT: SPECIFIC EXPOSURE/FLAMMABLE LIMITS. -- OTHER PROT EQUIP: TO
EXP OSURE. IF HANDLING HOT MATERIAL, USE INSULATED PROTECTIVE CLOTHING
(BOOTS, GLOVES, APRONS, ETC).
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >260.C, 500.F
Vapor Pres: NEGLIGIBLE
Spec Gravity: 0.9
Solubility in Water: INSOLUBLE
Appearance and Odor: CLEAR STRAW TO YELLOW LIQUID; NO DATA FOR ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE.
Materials To Avoid: MAY REACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: NONE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THIS PRODUCT IS NOT KNOWN TO CONTAIN ANY SARA TITLE
III, SECTION 313 REPORTABLE CHEMICALS AT OR GREATER THAN 1.0% (0.1% FOR
CARCINOGENS).
=======================================================
Other Information
=======================================================
Other Information: NFPA HAZARD IDENTIFICATION: DEGREE OF HAZARD: HEALTH = 0;
FIRE = 1; REACTIVITY = 0; HAZARD RATINGS: 0-LEAST, 1-SLIGHT, 2-MODERATE,
3-HIGH, 4-EXTREME. -- HYGIENE PRACTICES: PROPERLY DISPOSE OF CONTAMIN ATED
LEATHER ARTICLES INCLUDING SHOES, WHICH CANNOT BE DECONTAMINATED.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: IRM 903
Assigned IND: Y
Company: PENRECO
Street: 4426 EAST WASHINGTON BOULEVARD
City: LOS ANGELES CA
Zipcode: 99023-4411
Health Emergency Phone: 800-546-6040
Label Required IND: Y
Date Of Label Review: 12/29/1999
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: PRACTICALLY NON-IRRITATING. SKIN: MAY
CAUSE SLIGHT IRRIT UPON DIRECT CONT. PRLNG/RPTD CONT MAY RSLT IN CONT DERM
WHICH IS CHARACTERIZED BY DRYNESS, CHAPPING, & REDDENING. THIS CNDTN MAY
M AKE SKIN MORE SUSCEPTIBLE TO OTHER IRRITANTS, SENSITIZERS, & DISEASE.
PRLNG/RPTD CONT MAY RSLT IN OIL ACNE WHICH IS CHARACTERIZED BY BLACKHEADS
W/POSS SECONDARY INFECTION. INHAL: PROD HAS LOW VAP PRE SS & IS NOT
EXPECTED TO PRESENT INHAL HAZ AT AMBIENT CNDTNS. CHRONIC: NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
INPRO-CLEAN 2500, 4407
HBI-101 MIL 64742-94-5
67-64-1
1330-20-7
BIO-DUR 561 CURING AGENT WHITE, BD561-17880B
AOS HEAT SINK COMPOUND, 52022
0638, METAL MEDIC
850 SERIES WATER BORNE ACRYLIC EPOXY TOPCOAT
DOUBLE BUBBLE GREEN, 04004 PART B
LESLIE'S FILTER CLEANER
LESLIE'S SPRAY & RINSE
CUT-MAX 570-ND, 415707 64742-52-5
64742-46-7
68410-99-1
PR-421, 04211 PART B
SPRAY STENCIL INK, ALL COLORS, 27004
LESLIE'S DE FILTER CLEANER
IRM 903 64742-52-5
SILASTIC 738 RTV NON-CORROSIVE ADHESIVE/SEALANT WHITE 7631-86-9
1185-55-3
546-68-9
67-63-0
67-56-1
70131-67-8
80801-30-5
0810002,ANDEROL 401 D SYNTHETIC INSTRUMENT OIL
CRISP GUM REMOVER, F4260
TONER CARTRIDGE, FO-45ND
ZYMIT 9003-11-6
57-55-6
9014-01-1
56-81-5
INTERSHIELD PRORECO 609 CLEAR BASE, PRA610 110-43-0
108-10-1
108-65-6
123-86-4
INTERSHIELD PRORECO 609 CLEAR CONVERTER, PRA611 3779-63-3
123-86-4
TRIFREE BRAKE CLEANER, 03620 142-82-5
67-64-1
108-87-2
124-38-9
110-82-7
108-88-3
628-63-7
SCOTCHBOND MULTIPURPOSE ADHESIV, 70-2010-0402-8 1565-94-2
868-77-9
10373-78-1
10287-53-3
58109-40-3
PRESOLVE (AEROSOL), 01420 64742-88-7
5989-27-5
124-38-9
AKROFAX A SOFT (CAKE), 67378
FLOR-DECORATIVE FLAKES 108-05-4
7727-43-7
14807-96-6
13845-36-8
13463-67-7
1333-86-4
7440-50-8
SHIPPING-MATE BOX RENU COATING, 62-4973-4830-0 67-64-1
78-93-3
68512-98-1
74-98-6
8030-30-6
108-88-3
1330-20-7
64-17-5
13463-67-7
PLY#2 PROTECTIVE SKIN CREAM
EVERLUBE 9002 (10-955)
D.E.H. 26 EPOXY CURING AGENT 112-57-2
112-24-3
68131-73-7
VCI-238 ELECTRICORR
STADIS 450 CONDUCTIVITY IMPROVER (DINNSA STABILIZER)
CONSERVE SC TURF & ORNAMENTAL INSECT CONTROL
SAG 10
INTERSHIELD PRORECO 508 NAVY BLUE PART A, PRA559 110-43-0
13463-67-7
1333-86-4
PLY#2 PROTECTIVE SKIN CREAM
INTERSHIELD PRORECO 508, PRA556, DARK GRAY PART A 110-43-0
13463-67-7
1333-86-4
7631-86-9
ART UTILITY SPRAY GLUE 75-09-2
26523-64-8
124-38-9
F. P. ETHYL METHACRYLATE MONOMER
MAXI-LUBE, 4098
LUBE SHIELD PLUS, 4220
CALCIUM OXIDE
BARIUM NITRATE
DRI-SLIDE MULTI-PURPOSE LUBRICANT 64742-88-7
1317-33-5
7782-42-5
64742-52-5
85595-45-5
26566-95-0
DRI-SLIDE MULTI-PURPOSE LUBRICANT AEROSOL 64742-88-7
1317-33-5
7782-42-5
64742-52-5
85595-45-5
26566-95-0
68476-86-8
VESTENAMER 8012, 1252000
CAROLINA BLU DNA STAIN
SUPER ALL FLEET 30 63649-42-3
68649-42-3
POLYETHYLENE 10462N HIGH DENSITY, 47055 26221-73-8
POLYETHYLENE 955I LOW DENSITY, 23821 9002-88-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com