HOWMET CORPORATION, DOVER ALLO -- U700, NICKEL ALLOY
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLPJX
MSDS NAME: U700, NICKEL ALLOY
Responsible Party
Name: HOWMET CORPORATION, DOVER ALLOY
Address: ROY STREET
City: DOVER, NJ 07801-2310
Info Phone: 203-625-8733
Emergency Phone Number: 203-625-8733
Preparer's Name: KEITH SHELL
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HOWMET CORP
Address: ROY ST
City: DOVER NJ 07801
Phone: 203-625-8733/973-361-2310
=======================================================
Ingredients
=======================================================
Cas: 7440-02-0
RTECS #: QR5950000
Name: NICKEL
Percent by Wt: 59.
OSHA PEL: 1 MG/M3
ACGIH TLV: 1 MG/M3
EPA Rpt Qty: 100 LBS
DOT Rpt Qty: 100 LBS
------------------------------
Cas: 7440-47-3
RTECS #: GB4200000
Name: CHROMIUM
Percent by Wt: 15.
OSHA PEL: 1 MG/M3
ACGIH TLV: 0.5 MG/M3
ACGIH STEL: NOT ESTABLISHED
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-48-4
RTECS #: GF8750000
Name: COBALT
Percent by Wt: 15.
OSHA PEL: 0.05 MG/M3
ACGIH TLV: 0.05MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 7439-98-7
RTECS #: QA4680000
Name: MOLYBDENUM
Percent by Wt: 4.
OSHA PEL: 5 MG/M3
ACGIH TLV: 10 MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 7429-90-5
RTECS #: BD0330000
Name: ALUMINUM
Percent by Wt: 4.
OSHA PEL: 5 MG/M3
ACGIH TLV: 10 MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 7440-32-6
RTECS #: XR1700000
Name: TITANIUM
Percent by Wt: 3.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
IARC: YES
Effects of Exposure: INHALATION: DUSTS AND FUMES CONTAING NICKEL, CHROMIUM,
COBALT AND OTHER METALS CAN BE TOXIC IF THE PEL OR TLV SAFETY GUIDELINES ARE
EXCEEDED. SKIN CONTACT: EXPOSURE OR REPEATED CONTACT MAY IRRITATE TH E SKIN
OF SENSITIZED INDIVIDUALS. INGESTION: SEEK PROMPT MEDICAL HELP.
Explanation Of Carcinogenicity: THE IARC AND AND THE US DEPARTMENT OF HEALTH
AND HUMAN SERVICES (BASED ON THE WORK OF THE IARC) HAVE STAATED THAT NICKEL,
CHROMIUM, AND COBALT IN CERTAIN CHEMICAL FORMS CAN CAUSE CANCER.
Signs And Symptions Of Overexposure: SKIN CONTACT: EXPOSURE OR REPEATED CONTACT
MAY IRRITATE THE SKIN OF SENSITIZED INDIVIDUEALS. AVOID REPEATED AND
PROLONGED CONTACT.
Medical Cond Aggravated By Exposure: SENSITIVE INDIVIDUALS MAY DEVELOP ALLERGIC
ASTHMA.
First Aid: INHALATION: REMOVE VICTIM TO FRESH AIR. BEGIN ARTIFICIAL
RESPIRATION, IF VICTIM IS NOT BREATHING. SKIN CONTACT: BRUSH OFF SKIN AND
CLOTHING. WASH WITH SOAP AND WATER. REMOVE METALLIC PARTICLES AND CLE ANSE
WOUNDS. EYES: FLUSH WITH WATER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SOLID FORM: RETURN TO THE ORIGINAL CONTAINER AND
RECYCLE. DUST: CLEANUP PERSONNEL SHOULD WEAR PROTECTIVE CLOTHING AND
EQUIPMENT: GLOVES, GOGGLES, APRONS, RESPIRATORS, ETC. KEEP AIRBORNE DUST TO A
MINI MUM. SWEEP OR VACUUM P SPOLLED MATERIALS. WET DOWN AREA IF NECESSARY, BU
DO NOT FLUSH INTO DRAINS OR WATERWAYS. PLACE IN A METAL OR PLASTIC DRUM, SEAL
AND SAVE FOR RECLAMATION.
Waste Disposal Methods: THIS PRODUCT CONTAINS TOXIC CHEMICAL (E.G., NICKEL,
CHROMIUM, COBALT). IF THESE MATERIALS ARE RELEASED FROM THE ARTICLE THROUGH
METAL FINISHING, WELDING, MELTING, OF DISSOLVING, THE RELEASES MAY BE SU
BJECT TO EMERGENCY AND ANNUAL RELEASE REPORTING UNDER SECTIONS 304 AND 313 OF
THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW ACT.
Handling And Storage Precautions: USE GOOD HOUSECLEANING PRACTICES TO PREVENT
ACCUMLATION OF DUST, AND FOLLOW CLEANING TECHNIQUES (VACUUMING AND WET
SWEEPING) THAT WILL KEEP DUSTING TO A MINIMUM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NOT IGNITABLE
Extinguishing Media: SAND, DOLOMITE, GRAPHITE POWDER OR SODIUM CHLORIDE.
Unusual Fire/Explosion Hazard: SOLID METAL: NOT IGNITABLE. MODERATE FIRE AND
EXPLOSIVE HAZARD WHEN EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT OR STATIC
ELECTRICITY.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH APPROVED RESPIRATORS AS NECESSARY.
Ventilation: PROVIDE LOCAL EXHAUST VENTILATION IN AREAS WHERE METAL FUMES OR
DUSTS ARE PRODUCED.
Protective Gloves: WEAR PROTECTIVE GLOVES.
Eye Protection: GOGGLES DURING PROCESSING.
Other Protective Equipment: PROTECTIVE CLOTHING AND EQUIPMENT SHOULD BE WORN TO
PREVENT REPEATED SKIN CONTACT.
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE IN AREAS WHERE METAL DUSTS
OR FUMES ARE GENERATED. USE GOOD HOUSECLEANING PRACTICES TO PREVENT
ACCUMULATION OF DUST, & FOLLOW CLEANING TECHNIQUES THAT WILL KEEP DUSTING
DOWN.
Supplemental Safety and Health: MSDS 113 - NICKEL ALLOYS (U 500, U 700, X750
LOW CARBON ASTROLOGY VPSD). CHEMICAL CLASS: NICKEL ALLOY.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Appearance and Odor: SOLID METAL
=======================================================
Reactivity Data
=======================================================
Stability Condition To Avoid: SOLID FORM IS NOT REACTIVE.
Materials To Avoid: IN POWDER FORM, METALS ARE INCOMPATIBLE WITH STRONG
OXIDIZING AGENTS, SUCH AS CONCENTRATED NITRIC ACID.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THIS PRODUCTY CONTAINS TOXIC CHEMICALS (E.G.
NICKEL, CHROMIUM, COBALT). IF THESE MATERIALS ARE RELEASED FROM THE ARTICLE
THROUGH METAL FINISHING, WELDING, MELTING OR DISSOLVING, THE RELEASE MAY BE
SUB JECT TO EMRGENCY AND ANNUAL RELEASE REPORTING UNDER SECTION 304 AND 313
OF THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW ACT.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 159548
MSDS NAME: U700, NICKEL ALLOY
MSDS Prepared Date: 09/25/1992
Review Date: 10/27/2001
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: CY
Type Of Container: CYLINDER
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: U700, NICKEL ALLOY
Company: HOWMET CORP
Street: ROY ST
City: DOVER NJ
Zipcode: 07801
Health Emergency Phone: 203-625-8733
Label Required IND: Y
Date Of Label Review: 10/27/2001
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: NONE
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: None
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: INHALATION: DUSTS AND FUMES CONTAING NICKEL, CHROMIUM,
COBALT AND OTHER METALS CAN BE TOXIC IF THE PEL OR TLV SAFETY GUIDELINES ARE
EXCEEDED. SKIN CONTACT: EXPOSURE OR REPEATED CONTACT MAY IRRITATE TH E SKIN
OF SENSITIZED INDIVIDUALS. INGESTION: SEEK PROMPT MEDICAL HELP.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HASA MURIATIC ACID
| 7647-01-0 |
|
0301-6,QED
| |
|
1676B-176, HARVEST KING DEXRON III/MERCON ATF
| |
|
HENRY 595 COVE BASE ADHESIVE
| |
|
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
| |
|
0301-1,QED
| |
|
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
| |
|
STADIS 450 CONDUCTIVITY IMPROVER
| |
|
AI 8493-2 AIR FORCE TYPE II
| |
|
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
| |
|
SERMETEL 1337 PART B
| |
|
LS-29 (CP-29)
| |
|
19025, MIL-PRF-17672D GR 2075 TH
| 64742-54-7 |
|
INTERIOR SANDING WOOD SEALER/FINISH, 15-014
| 96-29-7
8052-41-3
8032-32-4
557-05-1 |
|
83307, HI-SPOT BLUE
| |
|
IMPERIAL 2135TH
| |
|
UNIFLOR 8991MT
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
| |
|
BACK TO NATURE STRIP-TOX
| 872-50-4
1119-40-0
627-93-0 |
|
C4821A, C4846A, C4872A, C4891A
| |
|
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
| |
|
AEROGLAZE 9947B WASH PRIMER, PART B
| 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2 |
|
PERMA-SLIK RAC AEROSOL (PPSRACAE)
| |
|
FB080, BRAKE PREP
| 111-76-2
6834-92-0 |
|
FC-15 GEL
| |
|
FIRELAND FLOOR TILE ADHESIVE
| |
|
RTV 5145 PASTE NON-CORR RTV SEALANT 20250
| 64-17-5
67-56-1 |
|
CHISEL GASKET REMOVER SOLVENT
| 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1 |
|
BINDER 350
| |
|
C4822A, C4847A, C4874A, C4892A
| |
|
MIL P20689D T1 C1 PLASTISOL, VP694581
| |
|
343715, FANOX N 33
| |
|
C4823A, C4848A, C4873A, C4893A
| |
|
PLASTISEAL "F"
| |
|
STEPANFOAM C-614-R
| |
|
INSBOARD 2600, INSBOARD 2600 HD
| |
|
REMOVABLE THREADLOCKER 242, IN 24231
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
PPB-4 NEUTRALIZER SOLUTION, 23688
| 1310-73-2
7732-18-5
77-86-1
87-69-4 |
|
POLYSPEC 700 EPOXY RESIN (700000, 700004)
| 115-86-6
84852-15-3 |
|
TWICELL, NICKEL METAL HYDRIDE BATTERY
| 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2 |
|
UTP S, AWS ENI-C1
| 7440-02-0
7782-42-5
1344-09-8 |
|
30522, HYDRAULIC JACK OIL
| 64742-52-5 |
|
POLYSPEC "M-50" PRIMER - A708 (708043)
| 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8 |
|
DCI-4A
| |
|
U500, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7 |
|
U700, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6 |
|
X750, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3 |
|
836, HAI-836 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
023, HAI-EPX ALLOY
| 7440-47-3
7440-02-0 |
|
|