HARRISON ALLOYS INC -- 023, HAI-EPX ALLOY
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLPKD
MSDS NAME: 023, HAI-EPX ALLOY
Responsible Party
Name: HARRISON ALLOYS INC
Address: 308 MIDDLESEX STREET
City: HARRISON NJ 07029
Info Phone: 201-483-4800
Emergency Phone Number: 201-483-4800
Preparer's Name: NOT PROVIDED
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HARRISON ALLOYS INC
Address: 308 MIDDLESEX STREET
City: HARRISON NJ 07029
Phone: 201-483-4800
=======================================================
Ingredients
=======================================================
Cas: 7440-47-3
RTECS #: GB4200000
Name: CHROMIUM
Percent by Wt: 8.
Other REC Limits: NOT PROVIDED
OSHA PEL: 1 MG/M3
ACGIH TLV: 0.5 MG/M3
ACGIH STEL: NOT ESTABLISHED
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-02-0
RTECS #: QR5950000
Name: NICKEL
Percent by Wt: 92.
Other REC Limits: NOT PROVIDED
OSHA PEL: 1 MG/M3
ACGIH TLV: 1 MG/M3
EPA Rpt Qty: 100 LBS
DOT Rpt Qty: 100 LBS
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NOT PROVIDED
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: EFFECTS OF EXPOSURE TO DUST, WELDING FUME AND GASES: SHORT
TERM EXPOSURE: NAUSEA, TIGHTNESS OF CHEST, FEVER, IRRITATION OF EYES, NOSE,
THROAT, AND SKIN; LOSS OF CONSCIOUSNESS DUE TO WELDING GASES OR L ACK OF
OXYGEN. LONG TERM EXPOSURE: ADVERSE EFFECTS MAY INCLUDE SKIN SENSITIZATION,
NEUROLOGICAL DAMAGE AND RESPIRATORY DISEASES (BRONCHIAL ASHTMA, LUNG FIBROSIS
OR PNEUMOCONIOSIS). ACCORDING TO OSHA 2 9CFR 1910.1200 NICKEL AND CHROMIUM
ARE CONSIDERED POSSIBLE CARCINOGENS. RECENT EPIDEMIOLOGICAL STUDIES OF
WORKERS MELTING AND WORKING ALLOYS CONTAINING NICKEL-CHROMIUM HAVE FOUND NO
INCREASED RISK OF CANCER.
Explanation Of Carcinogenicity: CONTAINS CHROMIUM AND NICKEL.
Signs And Symptions Of Overexposure: UNDER NORMAL HANDLING AND USE, EXPOSURE TO
SOLID, MASSIVE FORMS OF ALLOY PRESENTS FEW HEALTH HAZARDS. THEY MAY INCLUDE
SKIN IRRITATION OR OTHER ALLERGIC REACTIONS IN SENSITIVE INDIVIDUALS. EFFECTS
OF EXPOSURE TO DUST, WELDING FUME AND GASES MAY INCLUDE NAUSEA, TIGHTNESS OF
CHEST, FEVER, IRRITATION OF EYES, NOSE, THROAT, AND SKIN; LOSS OF
CONSCIOUSNESS DUE TO WELDING GASES OR LACK OF OXYGEN.
Medical Cond Aggravated By Exposure: SENSITIVE INDIVIDUALS.
First Aid: REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL ATTENTION. ADMINISTER
OXYGEN IF VICTIM IS UNCONSCIOUS. IF NOT BREATHING, RESUSCITATE IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: UNDER NORMAL HANDLING AND USE, MATERIAL IS NOT
VOLATILE/DUSTY AND DOES NOT PRESENT SPILLAGE AND LEAKAGE PROBLEMS. NO
PROTECTION REQUIRED, EXCEPT AVOID PROLONGED OR REPEATED DIRECT SKIN CONTACT
IF SENS ITIVE TO METALS. USE GLOVES. IF MATERIAL IS RELEASED/SPILLED FROM
CUTTING, GRINDING/WELDING OPERATIONS, VACUUM RESIDUE INTO SUITABLE CONTAINERS
AND DISPOSE OF IN ACCORDANCE WITH EPA/LOCAL REGULATIONS.
Neutralizing Agent: NOT RELEVANT
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH EPA OR LOCAL REGULATIONS.
Handling And Storage Precautions: MATERIAL IN SOLID FORM DOES NOT REQUIRE
SPECIAL PRECAUTIONS IN HANDLING AND STORING. HOWEVER, USE INDUSTRIAL HYGIENE
AIR MONITORING TO ENSURE THAT THE USE OF THIS MATERIAL DOES NOT CREATE
EXPOSURES WH ICH EXCEED THE LEVELS SPECIFIED FOR INGREDIENTS PEL/TLV.
Other Precautions: NOT PROVIDED
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: UNFLAMMABLE
Extinguishing Media: MATERIAL IS UNFLAMMABLE; HOWEVER, WELDING ARCS AND SPARKS
CAN IGNITE FLAMMABLE LIQUIDS AND VAPORS AND COMBUSTIBLE SOLIDS.
Fire Fighting Procedures: NONE
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF SOLID METAL ALLOYS ARE CONVERTED IN MANUFACTURING
(GRINDING, HIGH TEMPERATURE CUTTING AND WELDING) PROCESSES TO DUSTS, FUMES,
GASES/MISTS AND VENTILATION IS NOT ADEQUATE TO MAINTAIN EXPOSURES BELOW
LIMITS SPECIFIED IN INGREDIENTS' PEL/TLV, THEN RESPIRATORY PROTECTION SHOULD
BE USED. USE NIOSH APPROVED RESPIRATORS IN ACCORDANCE WITH OSHA 29 CFR
1910.134.
Ventilation: IF SOLID METAL ALLOYS ARE CONVERTED TO DUSTS, FUMES OR MISTS,
MAINTAIN WORKING ENVIRONMENT BELOW THE EXPOSURE LIMITS WITH ADEQUATE EXHAUST
VENTILATION.
Protective Gloves: LEATHER OR RUBBER GLOVES ARE RECOMMENDED.
Eye Protection: USE SAFETY GOGGLES WHEN CUTTING, GRINDING, OR WELDING.
Other Protective Equipment: WHEN CUTTING, GRINDING OR WELDING, WEAR GLOVES,
FACE PROTECTION AND FLAME RETARDANT CLOTHING. SELECT WELDING LENSE SHADE FROM
AWS PUBLICATIONS F2.2.
Work Hygienic Practices: NOT PROVIDED
Supplemental Safety and Health: ABBREVIATION: N/A = NOT APPLICABLE. N/AV = NOT
AVAILABLE. N/K = UNKNOWN. N/P = NOT PROVIDED. N/R = NOT RELEVANT. N/D = NOT
DETERMINED. N/E = NOT ESTABLISHED.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
NRC/State LIC No: NOT RELEVANT
Boiling Point: =2750.C, 4982.F
B.P. Text: +/- 200C
Melt/Freeze Pt: =1425.C, ######F
M.P/F.P Text: APPROX.
Decomp Text: NOT PROVIDED
Spec Gravity: (H2O=1)8.7
Solubility in Water: 0
Appearance and Odor: GREY METALLIC WIRE, ROD OR STRIP - ODORLESS
Percent Volatiles by Volume: 0
Corrosion Rate: NOT PROVIDED
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NOT PROVIDED
Materials To Avoid: AVOID ACIDS. CONTACT WITH MINERAL ACIDS WILL RELEASE
HYDROGEN- A READILY COMBUSTIBLE GAS.
Hazardous Decomposition Products: FUMES AND GASES FROM WELDING AND HIGH
TEMPERATURE CUTTING MAY INCLUDE OXIDES OF METALS, CHROMATES, FLUORIDES AND
COMPLEX METALLICS. THE GASES MAY INCLUDE CARBON MONOXIDE, OZONE AND NITROGEN
OXIDES.
Conditions To Avoid Polymerization: NOT PROVIDED
=======================================================
Toxicological Information
=======================================================
Toxicological Information: NOT PROVIDED
=======================================================
Ecological Information
=======================================================
Ecological: NOT PROVIDED
=======================================================
MSDS Transport Information
=======================================================
Transport Information: NOT PROVIDED
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: NOTE: UNDER SARA, TITLE III, IT IS REQUIRED THAT
INGREDIENTS WHICH ARE LISTED IN SECTION 313, TOXIC CHEMICAL LIST, BE
SPECIFICALLY IDENTIFIED. THESE ARE: CHROMIUM, COPPER, MANGANESE AND NICKEL.
Federal Regulatory Information: NOT PROVIDED
State Regulatory Information: NOT PROVIDED
=======================================================
Other Information
=======================================================
Other Information: NONE
=======================================================
Transportation Information
=======================================================
Trans ID NO: 159553
MSDS NAME: 023, HAI-EPX ALLOY
MSDS Prepared Date: 01/01/1996
Review Date: 10/27/2001
Multiple KIT Number: 0
Unit Of Issue: CY
Type Of Container: CYLINDER
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 023, HAI-EPX ALLOY
Company: HARRISON ALLOYS INC
Street: 308 MIDDLESEX STREET
City: HARRISON NJ
Zipcode: 07029
Health Emergency Phone: 201-483-4800
Date Of Label Review: 10/27/2001
Status Code: A
Signal Word: NONE
Health Hazard: None
Contact Hazard: None
Fire Hazard: None
Reactivity Hazard: None
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HASA MURIATIC ACID
| 7647-01-0 |
|
0301-6,QED
| |
|
1676B-176, HARVEST KING DEXRON III/MERCON ATF
| |
|
HENRY 595 COVE BASE ADHESIVE
| |
|
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
| |
|
0301-1,QED
| |
|
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
| |
|
STADIS 450 CONDUCTIVITY IMPROVER
| |
|
AI 8493-2 AIR FORCE TYPE II
| |
|
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
| |
|
SERMETEL 1337 PART B
| |
|
LS-29 (CP-29)
| |
|
19025, MIL-PRF-17672D GR 2075 TH
| 64742-54-7 |
|
INTERIOR SANDING WOOD SEALER/FINISH, 15-014
| 96-29-7
8052-41-3
8032-32-4
557-05-1 |
|
83307, HI-SPOT BLUE
| |
|
IMPERIAL 2135TH
| |
|
UNIFLOR 8991MT
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
| |
|
BACK TO NATURE STRIP-TOX
| 872-50-4
1119-40-0
627-93-0 |
|
C4821A, C4846A, C4872A, C4891A
| |
|
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
| |
|
AEROGLAZE 9947B WASH PRIMER, PART B
| 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2 |
|
PERMA-SLIK RAC AEROSOL (PPSRACAE)
| |
|
FB080, BRAKE PREP
| 111-76-2
6834-92-0 |
|
FC-15 GEL
| |
|
FIRELAND FLOOR TILE ADHESIVE
| |
|
RTV 5145 PASTE NON-CORR RTV SEALANT 20250
| 64-17-5
67-56-1 |
|
CHISEL GASKET REMOVER SOLVENT
| 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1 |
|
BINDER 350
| |
|
C4822A, C4847A, C4874A, C4892A
| |
|
MIL P20689D T1 C1 PLASTISOL, VP694581
| |
|
343715, FANOX N 33
| |
|
C4823A, C4848A, C4873A, C4893A
| |
|
PLASTISEAL "F"
| |
|
STEPANFOAM C-614-R
| |
|
INSBOARD 2600, INSBOARD 2600 HD
| |
|
REMOVABLE THREADLOCKER 242, IN 24231
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
PPB-4 NEUTRALIZER SOLUTION, 23688
| 1310-73-2
7732-18-5
77-86-1
87-69-4 |
|
POLYSPEC 700 EPOXY RESIN (700000, 700004)
| 115-86-6
84852-15-3 |
|
TWICELL, NICKEL METAL HYDRIDE BATTERY
| 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2 |
|
UTP S, AWS ENI-C1
| 7440-02-0
7782-42-5
1344-09-8 |
|
30522, HYDRAULIC JACK OIL
| 64742-52-5 |
|
POLYSPEC "M-50" PRIMER - A708 (708043)
| 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8 |
|
DCI-4A
| |
|
U500, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7 |
|
U700, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6 |
|
X750, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3 |
|
836, HAI-836 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
023, HAI-EPX ALLOY
| 7440-47-3
7440-02-0 |
|
|