HASA INC -- HASA MURIATIC ACID
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLNGB
MSDS NAME: HASA MURIATIC ACID
Responsible Party
Name: HASA INC
Address: 23119 DRAYTON STREET
City: SAUGUS CA 91350
Info Phone: 661-259-5848
Emergency Phone Number: (800)424-9300
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HASA INC
Address: 23119 DRAYTON STREET
City: SAUGUS CA 91350
Phone: 661-259-5848
=======================================================
Ingredients
=======================================================
Cas: 7647-01-0
RTECS #: MW4025000
Name: HYDROCHLORIC ACID
> Wt: 1.
OSHA PEL: C7 MG/M3;C5 PPM
ACGIH TLV: NOT ESTABLISHED
ACGIH STEL: C7.5 MG/M3;C5 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE: IRRITATION, CORROSIVE. WILL BURN EYES ON CONTACT;
FUMES AND/OR LIQUID CONTACT. SKIN: LIQUID CONTACT; IRRITATION, CORROSIVE.
NOT CONSIDERED TO BE A SKIN SENSITIZER.
Signs And Symptions Of Overexposure: EYE AND SKIN BURNS. NOT A SKIN SENSITIZER.
Medical Cond Aggravated By Exposure: NO DATA AVAILABLE.
First Aid: EYE: FLUSH WITH WATER. REMOVE CONTACT LENESES. HOLD EYELIDS OPEN.
CONTINUE FLUSHING WITH WATER FOR 15 MINUTES. GET PROMPT MEDICAL ATTENTION.
SKIN: WASH AFFECTED AREA WITH WATER FOR 15 MINUTES. GET MED ICAL ATTENTION.
INGESTION: DRINK LARGE QUANTITIES OF WATER. DO NOT INDUCE VOMITING. FOLLOW
WITH MILK OF MAGNESIA, VEGETABLE OIL, OR BEATEN EGG. CALL A PHYSICIAN OR
POISON CONTROL CENTER IMMEDIATELY. I NHALATION: FUMES. MOVE TO A SAFE AREA.
IF NOT BREATHING, GIVE ARTIFICIAL RSPIRATION. CALL PHYSICIAN IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: NEUTRALIZE LIQUID WITH SODA ASH, SODIUM
SESQUIRCARBONATE, SLAKED LIME, OR SODIUM BICARBONATE, AND FLUSH TO A SANITARY
SEWER.
Neutralizing Agent: SODA ASH, SODIUM SESQUIRCARBONATE, SLAKED LIME, OR SODIUM
BICARBONATE.
Waste Disposal Methods: NEUTRALIZE AND FLUSH TO A SANITARY SEWER.
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE. DO NOT MIX WITH
ALKALINE MATERIALS OR METALS. KEEP CONTAINER CLOSED AND PROTECTED AGAINST
PHYSICAL DAMAGE. SEPARATE FROM INCOMPATIBLE MATERIALS IN STORAGE AREAS. STORE
SEPA RATED FROM OXIDIZERS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. KEEP OUT
OF THE REACH OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NONFLAMMABLE
Extinguishing Media: USE WATER SPRAY OR FOG NOZZLE TO KEEP CONTAINERS COOL MOVE
CONTAINERS AWAY FROM FIRE IF THERE IS NO RISK.
Fire Fighting Procedures: WEAR SRLF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard: FORMS FLAMMABLE HYDROGEN GAS ON CONTACT WITH
METALS. WILL REACT WITH CAUSTIC MATERIALS, OXIDIZING MATERIALS AND METALS
(ZINC, GALVANIZED IRON, BRASS, ALUMINUM, COPPER AND COPPER ALLOYS, ETC.)
=======================================================
Control Measures
=======================================================
Respiratory Protection: DO NOT BREATHE VAPOR.
Ventilation: PROVIDE VENTILATION FOR STORAGE AND USE AREAS.
Protective Gloves: RUBBER GLOVES
Eye Protection: GOGGLES SHOULD BE VAPOR PROOF.
Other Protective Equipment: IMPERVIOUS CLOTHING WHEN HANDLING AND USING THIS
PRODUCT.
Work Hygienic Practices: WASH HANDS AFTER HANDLING. AVOID CONTACT WITH SKIN AND
CLOTHING. WEAR RUBBER GLOVES AND EYE PROTECTION WHEN HANDLING.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: C1
Boiling Point: =83.C, 181.4F
Melt/Freeze Pt: =-46.C, -50.8F
Vapor Pres: 35 MM HG @ 25 C
Vapor Density: 1.16
PH: <1.0
Solubility in Water: COMPLETE
Appearance and Odor: STRAW YELLOW TO WATER WHITE SOLUTION, IRRITATING PUNGENT,
ACIDIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: WILL REACT WITH CAUSTIC MATERIALS, OXIDIZING MATERIALS AND
METALS (ZINC, GALVANIZED IRON, BRASS, ALUMINUM, COPPER AND COPPER ALLOYS,
ETC.)
Hazardous Decomposition Products: FORMS FLAMMABLE HYFROGEN GAS ON CONTACT WITH
METALS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: ORAL (INGESTION) LD50:900 MG/KG (RAT).
INHALATION(BREATHING) LC50: 3124 PPM (1 HOUR, RAT). DERMAL LD 50: NO DATA
AVAILABLE. EYE IRRITATION: CORROSIVE. WILL BURN EYES ON CONTACT. SKIN
IRRITATION: CORRO SIVE, NOT CONSIDERED TO BE A SKIN SENSITIZER.
=======================================================
Ecological Information
=======================================================
Ecological: AQUATIC AND ENVIRONMENTAL TOSICITY: 96- HOUR LC50 (MOSQUITO FISH):
282 MG/L. 96- HOUR LC 50(BLUE GIL): 100 PH LOWERED TO 3.6.L
=======================================================
MSDS Transport Information
=======================================================
Transport Information: HYDROCHLORIC ACID SOLUTION, 8, UN 1789 P.G. 11(4-1
GALLON RETURNABLE BOTTLES IN PLSTIC CRATE ADD DOT-E-6614 AFTER P.G. II.
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: CERCLA HAZARDOUS SUBSTANCE, RQ=5000 LBS. (17100
GALLONS BASED ON HCL IN SOLUTION
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 159241
MSDS NAME: HASA MURIATIC ACID
MSDS Prepared Date: 01/01/2001
Review Date: 10/11/2001
Multiple KIT Number: 0
Unit Of Issue: CY
Type Of Container: CYLINDER
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: HJG
DOT Proper Shipping Name: HYDROCHLORIC ACID
Hazard Class: 8
UN ID Num: UN1789
DOT Packaging Group: II
Label: CORROSIVE
Special Provision: A3,A6,B3,B15,N41,T9,T27
Packaging Exception: 154
Non Bulk Pack: 202
Bulk Pack: 242
Max Qty Pass: 1 L
Max Qty Cargo: 30 L
Vessel Stow Req: C
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: IEX
IMO Proper Shipping Name: HYDROCHLORIC ACID
IMDG Page Number: 8183
UN Number: 1789
UN Hazard Class: 8
IMO Packaging Group: II/III
Subsidiary Risk Label: -
EMS Number: 8-03
MED First Aid Guide NUM: 700
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: NPG
IATA UN ID Num: 1789
IATA Proper Shipping Name: HYDROCHLORIC ACID
IATA UN Class: 8
IATA Label: CORROSIVE
UN Packing Group: II
Packing Note Passenger: 809
Max Quant Pass: 1L
Max Quant Cargo: 30L
Packaging Note Cargo: 813
Exceptions: A3
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: NPG
AFI Proper Shipping Name: HYDROCHLORIC ACID, SOLUTION
AFI Hazard Class: 8
AFI UN ID NUM: UN1789
AFI Packing Group: II
Special Provisions: P4, A3, A6, N41
Back Pack Reference: A12.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HASA MURIATIC ACID
Assigned IND: Y
Company: HASA INC
Street: 23119 DRAYTON STREET
City: SAUGUS CA
Zipcode: 91350
Health Emergency Phone: (800)424-9300
Label Required IND: Y
Date Of Label Review: 10/11/2001
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: EYE: IRRITATION, CORROSIVE. WILL BURN EYES ON CONTACT;
FUMES AND/OR LIQUID CONTACT. SKIN: LIQUID CONTACT; IRRITATION, CORROSIVE.
NOT CONSIDERED TO BE A SKIN SENSITIZER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HASA MURIATIC ACID
| 7647-01-0 |
|
0301-6,QED
| |
|
1676B-176, HARVEST KING DEXRON III/MERCON ATF
| |
|
HENRY 595 COVE BASE ADHESIVE
| |
|
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
| |
|
0301-1,QED
| |
|
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
| |
|
STADIS 450 CONDUCTIVITY IMPROVER
| |
|
AI 8493-2 AIR FORCE TYPE II
| |
|
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
| |
|
SERMETEL 1337 PART B
| |
|
LS-29 (CP-29)
| |
|
19025, MIL-PRF-17672D GR 2075 TH
| 64742-54-7 |
|
INTERIOR SANDING WOOD SEALER/FINISH, 15-014
| 96-29-7
8052-41-3
8032-32-4
557-05-1 |
|
83307, HI-SPOT BLUE
| |
|
IMPERIAL 2135TH
| |
|
UNIFLOR 8991MT
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
| |
|
BACK TO NATURE STRIP-TOX
| 872-50-4
1119-40-0
627-93-0 |
|
C4821A, C4846A, C4872A, C4891A
| |
|
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
| |
|
AEROGLAZE 9947B WASH PRIMER, PART B
| 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2 |
|
PERMA-SLIK RAC AEROSOL (PPSRACAE)
| |
|
FB080, BRAKE PREP
| 111-76-2
6834-92-0 |
|
FC-15 GEL
| |
|
FIRELAND FLOOR TILE ADHESIVE
| |
|
RTV 5145 PASTE NON-CORR RTV SEALANT 20250
| 64-17-5
67-56-1 |
|
CHISEL GASKET REMOVER SOLVENT
| 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1 |
|
BINDER 350
| |
|
C4822A, C4847A, C4874A, C4892A
| |
|
MIL P20689D T1 C1 PLASTISOL, VP694581
| |
|
343715, FANOX N 33
| |
|
C4823A, C4848A, C4873A, C4893A
| |
|
PLASTISEAL "F"
| |
|
STEPANFOAM C-614-R
| |
|
INSBOARD 2600, INSBOARD 2600 HD
| |
|
REMOVABLE THREADLOCKER 242, IN 24231
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
PPB-4 NEUTRALIZER SOLUTION, 23688
| 1310-73-2
7732-18-5
77-86-1
87-69-4 |
|
POLYSPEC 700 EPOXY RESIN (700000, 700004)
| 115-86-6
84852-15-3 |
|
TWICELL, NICKEL METAL HYDRIDE BATTERY
| 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2 |
|
UTP S, AWS ENI-C1
| 7440-02-0
7782-42-5
1344-09-8 |
|
30522, HYDRAULIC JACK OIL
| 64742-52-5 |
|
POLYSPEC "M-50" PRIMER - A708 (708043)
| 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8 |
|
DCI-4A
| |
|
U500, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7 |
|
U700, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6 |
|
X750, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3 |
|
836, HAI-836 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
023, HAI-EPX ALLOY
| 7440-47-3
7440-02-0 |
|
|