ITW DYKEM/ DYMON -- 83307, HI-SPOT BLUE
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-311-6172
MSDS Num: CLNRF
MSDS NAME: 83307, HI-SPOT BLUE
Responsible Party
Name: ITW DYKEM/ DYMON
Address: 805 E OLD 56 HWY
City: OLATHE KS 66061
Info Phone: 800-443-9536
Emergency Phone Number: (800)424-9300
Resp. Party Other MSDS No.: FORMULA KEY: 8716
=======================================================
Item Description Information
=======================================================
Item Name: BEARING DYE,BLUE
Unit of Issue: TU
Quantitative Expression: 20000000022OZ
UI Container Qty: 0
Type of Container: TUBE
=======================================================
Health Hazards Data
=======================================================
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYE: MODERATE IRRITATION. SKIN: MODERATE IRRITANT.
INHALATION: HIGH CONCENTRATIONS OF VAPORS MAY PRODUCE IRRITATION OF THE
RESPIRATORY TRACT, HEADACHE, DIZZINESS, AND NAUSEA. INGESTION: SIMILAR TO
INHALATION. CHRONIC: PROLONGED REPEATED OVEREXPOSURE TO THIS PRODUCT MAY LEAD
TO SKIN SENSITIZATION OR DERMATITIS.
Explanation Of Carcinogenicity: NTP CARCINOGEN: NO. IARC MONOGRAPHS: NO. OSHA
REGULATED: NO. ACGIH CARCINOGENICITY: NO.
Signs And Symptions Of Overexposure: INHALATION: HIGH CONCENTRATIONS OF VAPORS
MAY PRODUCE IRRITATION OF THE RESPIRATORY TRACT, HEADACHE, DIZZINESS, AND
NAUSEA. SKIN AND EYE CONTACT: MODERATE IRRITATION. SKIN ABSORPTION: MODERATE
IRRITAN T. INGESTION: NAUSEA AND VOMITING. DO NOT INDUCE VOMITING. IF
VOMITING OCCURS KEEP HEAD BELOW HIPS TO PREVENT ASPIRATION OF LIQUID INTO
LUNGS. CALL A PHYSICIAN IMMEDIATELY.
First Aid: EYE: FLUSH WELL WITH WATER. CONTACT A PHYSICIAN IF IRRITATION
PERSISTS. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE PATIENT TO FRESH
AIR. CONTACT A PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING. CONTACT A
PHYSICIAN. IF VOMITING OCCURS, KEEP HEAD BELOW HIPS TO PREVENT ASPIRATION OF
LIQUID INTO LUNGS
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PREVENT SKIN AND EYE CONTACT. USE NON-COMBUSTIBLE
MATERIAL TO CONFINE AND/OR ABSORB. ELIMINATE IGNITION SOURCES. VENTILATE
AREA.
Waste Disposal Methods: REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: "EMPTY" CONTAINERS RETAIN RESIDUE (LIQUID
AND/OR VAPOR) AND CAN BE DANGEROUS. DO NOT PRESSUREISE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, SPARKS, FLAMES,
STATIC ELEC TRICITY OR OTHER SOURCES OF IGNITION. USE WITH ADEQUATE
VENTILATION.
Other Precautions: ANY PROPOSED USE OF THIS PRODUCT IN ELEVATED-TEMPERATURE
PROCESSES SHOULD BE THOROUGHLY EVALUSTED TO ASSURE THAT SAFE OPERATING
CONDITIONS ARE ESTABLISHED AND MAINTAINED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =111.1C, 232.F
Extinguishing Media: CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures: FIRE FIGHTERS SHOULD WEAR SELF CONTAINED BREATHING
APPARATUS IN CONFINED AREAS
Unusual Fire/Explosion Hazard: NONE
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED FOR NORMAL USE WITH ADEQUATE VENTILATION.
IN POORLY VENTILATED AREAS, USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation: LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
MECHANICAL VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves: CHEMICAL RESISTANT RUBBER GLOVES SUCH AS POLYVINYL
CHLORIDE-COATED.
Eye Protection: SAFETY GLASSES. SPLASH PROOF GOGGLES.
Other Protective Equipment: EYE BATH AND SAFETY SHOWER. OTHER PROTECTIVE GEAR
AS REQUIRED TO MINIMIZE SKIN CONTACT.
Work Hygienic Practices: FOLLOW CURRENT H.M.I.S REGULATIONS.
Supplemental Safety and Health: CODES: H=1, F=1, R=0, P=B.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
Vapor Density: >1(AIR=1)
Spec Gravity: 0.95 (H2O=1)
Solubility in Water: INSOLUBLE
Appearance and Odor: BLUE OPAQUE PASTE LIKE SOLID WITH PETROLEUM OIL ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS, AND OPEN FLAMES.
Materials To Avoid: STRONG OXIDIZING AGENTS
Hazardous Decomposition Products: OXIDES OF CARBON AND PARAFFIN FUME
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR
=======================================================
Toxicological Information
=======================================================
Toxicological Information: IF MISTS ARE GENERATED IN THE USE OF THIS PRODUCT,
THEN THE FOLLOWING VALUES FOR PETROLEUM OILS APPLY. ACHIG: TLV/TWA=
5MG/M3/8HR. OSHA PEL/TWA= 5MG/M3/8HR. ACGIH: TLV/STEL= 10 MG/M3.
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: PROPER SHIPPING NAME: NON-HAZARDOUS ACCORDING TO IATA,
49CFR AND IMDG REGULATIONS.
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: NO REPORTABLE QUANTITIES OF HAZARDOUS
INGREDIENTS ARE PRESENT.
=======================================================
Other Information
=======================================================
Other Information: WARNING: MANY HOT ORGANIC CHEMICAL VAPORS OR MISTS ARE
SUSCEPTIBLE TO SUDDEN SPONTANEOUS COMBUSTIN WHEN MIXED WITH AIR. IGNITION MAY
OCCUR AT TEMPERATURES BELOW THOSE PUBLISHED IN LITERATURE AS "AUTOI GNITION"
OR "IGNITION" TEMPERATURES. IGNITION TEMPERATURES DECREASE WITH INCREASING
VAPOR VOLUME & VAPOR/AIR CONTACT TIME, & ARE INFLUENCED BY PRESSURE
CHANGES. IGNITION OF ORGANIC CHEMICAL VAPORS MAY OCCUR AT TYPICAL
ELEVATED-TEMPERATURE PROCESS CONDITIONS, ESPECIALLY IN PROCESS OPERATING
UNDER VACUUM IF SUBJECTED TO SUDDEN INGRESS OF AIR, OR OUTSIDE PROCESS
EQUIPMENT OPERATING UNDER ELEVATED PRE SSURE IF SUDDEN ESCAPE OF VAPOR/MIST.
=======================================================
Transportation Information
=======================================================
Trans ID NO: 159355
MSDS NAME: 83307, HI-SPOT BLUE
MSDS Prepared Date: 01/12/2001
Review Date: 10/19/2001
Net Unit Weight: 3.4 LBS
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: TU
Container QTY: 0
Type Of Container: TUBE
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 83307, HI-SPOT BLUE
Company: ITW DYKEM/ DYMON
Street: 805 E OLD 56 HWY
City: OLATHE KS
Zipcode: 66061
Health Emergency Phone: (800)424-9300
Label Required IND: Y
Date Of Label Review: 10/19/2001
Status Code: A
Year Procured: 2001
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: NO
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYE: MODERATE IRRITATION. SKIN: MODERATE
IRRITANT. INHALATION: HIGH CONCENTRATIONS OF VAPORS MAY PRODUCE IRRITATION OF
THE RESPIRATORY TRACT, HEADACHE, DIZZINESS, AND NAUSEA. INGESTION: SIMILAR
TO INHALATION. CHRONIC: PROLONGED REPEATED OVEREXPOSURE TO THIS PRODUCT MAY
LEAD TO SKIN SENSITIZATION OR DERMATITIS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
HASA MURIATIC ACID
| 7647-01-0 |
|
0301-6,QED
| |
|
1676B-176, HARVEST KING DEXRON III/MERCON ATF
| |
|
HENRY 595 COVE BASE ADHESIVE
| |
|
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
| |
|
0301-1,QED
| |
|
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
| |
|
STADIS 450 CONDUCTIVITY IMPROVER
| |
|
AI 8493-2 AIR FORCE TYPE II
| |
|
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
| |
|
SERMETEL 1337 PART B
| |
|
LS-29 (CP-29)
| |
|
19025, MIL-PRF-17672D GR 2075 TH
| 64742-54-7 |
|
INTERIOR SANDING WOOD SEALER/FINISH, 15-014
| 96-29-7
8052-41-3
8032-32-4
557-05-1 |
|
83307, HI-SPOT BLUE
| |
|
IMPERIAL 2135TH
| |
|
UNIFLOR 8991MT
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
| |
|
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
| |
|
BACK TO NATURE STRIP-TOX
| 872-50-4
1119-40-0
627-93-0 |
|
C4821A, C4846A, C4872A, C4891A
| |
|
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
| |
|
AEROGLAZE 9947B WASH PRIMER, PART B
| 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2 |
|
PERMA-SLIK RAC AEROSOL (PPSRACAE)
| |
|
FB080, BRAKE PREP
| 111-76-2
6834-92-0 |
|
FC-15 GEL
| |
|
FIRELAND FLOOR TILE ADHESIVE
| |
|
RTV 5145 PASTE NON-CORR RTV SEALANT 20250
| 64-17-5
67-56-1 |
|
CHISEL GASKET REMOVER SOLVENT
| 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1 |
|
BINDER 350
| |
|
C4822A, C4847A, C4874A, C4892A
| |
|
MIL P20689D T1 C1 PLASTISOL, VP694581
| |
|
343715, FANOX N 33
| |
|
C4823A, C4848A, C4873A, C4893A
| |
|
PLASTISEAL "F"
| |
|
STEPANFOAM C-614-R
| |
|
INSBOARD 2600, INSBOARD 2600 HD
| |
|
REMOVABLE THREADLOCKER 242, IN 24231
| 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7 |
|
PPB-4 NEUTRALIZER SOLUTION, 23688
| 1310-73-2
7732-18-5
77-86-1
87-69-4 |
|
POLYSPEC 700 EPOXY RESIN (700000, 700004)
| 115-86-6
84852-15-3 |
|
TWICELL, NICKEL METAL HYDRIDE BATTERY
| 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2 |
|
UTP S, AWS ENI-C1
| 7440-02-0
7782-42-5
1344-09-8 |
|
30522, HYDRAULIC JACK OIL
| 64742-52-5 |
|
POLYSPEC "M-50" PRIMER - A708 (708043)
| 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8 |
|
DCI-4A
| |
|
U500, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7 |
|
U700, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6 |
|
X750, NICKEL ALLOY
| 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3 |
|
836, HAI-836 ALLOY
| 7440-47-3
7439-89-6
7440-02-0 |
|
023, HAI-EPX ALLOY
| 7440-47-3
7440-02-0 |
|
|