Search   
MSDS  : ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
CAS  :
NAME  : *** proprietary ***
BENNETTE PAINT MANUFACTURING C -- ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 3
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLNRS
MSDS NAME: ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
Responsible Party
Name: BENNETTE PAINT MANUFACTURING COMPANY INC.
Address: 401 INDUSTRY DRIVE
City: HAMPTON VA 23661
Info Phone: 804-838-7777
Emergency Phone Number: 804-838-7777
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: BENNETTE PAINT MANUFACTURING CO INC
Address: 401 INDUSTRY DR
City: HAMPTON VA 23661
Phone: 804-838-7777
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: RESIDUAL VAPORS MAY BE IRRITATING TO EYES,
SKIN MUCOUS MEMBRANES, RESPIRATORY TRACT, AND MAY PRODUCE SYMPTOMS OF
HEADACHE, NAUSEA IN POORLY VENTILATED AREAS. SKIN CONTACT: PROLONGED OR REP
EATED CONTACT WITH PAINT MAY CAUSE SKIN IRRITATION. EYE CONTACT: DIRECT
CONTACT WITH PAINT MAY RESULT IN EYE IRRITATION. THIS PRODUCT CONTAINS CHROME
OXIDE WHICH IS A STABLE CRYSTAL STRUCTURE. PROLONG ED OVEREXPOSURE TO
AIRBORNE DUSTS OF CERTAIN COMPOUNDS IS KNOWN TO CAUSE ADVERSE EFFECTS ON THE
LUNGS.
Medical Cond Aggravated By Exposure: ALLERGY OR SKIN SENSITIZATION.
First Aid: INHALATION: MOVE SUBJECT TO FRESH AIR. EYE CONTACT: FLUSH EYES WITH
PLENTY OF WATER AND CONSULT A PHYSICIAN. SKIN CONTACT: WASH SKIN THOROUGHLY
WITH SOAP AND PLENTY OF WATER. INGESTION: GIVE TWO GLASS ES OF WATER TO DRINK
AND CALL A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: RECOVER LIQUID WITH ABSORBENT MATERIAL.
Waste Disposal Methods: DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATIONS.
Handling And Storage Precautions: KEEP OUT OF REACH OF CHILDREN. DO NOT INGEST.
Other Precautions: AVOID PROLONGED CONTACT WITH SKIN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point: =71.1C, 160.F
Lower Limits: 0.9%
Upper Limits: 8.5%
Extinguishing Media: FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS
AND FULL PROTECTIVE EQUIPMENT (FP N). WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE EXPLOSION WHEN EXPOSED
TO EXTREME HEAT.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. CAN FORM PEROXIDES OF UNKNOWN STABILITY.
=======================================================
Control Measures
=======================================================
Respiratory Protection: A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN (FP N). IN CONFINED AREAS AND WHEN SPRAYING, USE NIOSH
APPROVED RESPIRATORY DEVICE.
Ventilation: PROPER VENTILATION.
Protective Gloves: RUBBER GLOVES IF SKIN SENSITIZTION PRESENT.
Eye Protection: ANSI APPROVED CHEMICAL SAFETY GOGGLES (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). NONE NEEDED UNLESS SPECIAL EQUIPMENT DESIRED.
Work Hygienic Practices: WASH HANDS AFTER USE, BEFORE EATING OR USING WASHROOM.
Supplemental Safety and Health: PHYSICAL/CHEMICAL INFORMATION (CON'T): WEIGHT
PER GALLON: 10.0. VAPOR PRESSURE: PROPYLENE GLYCOL MONOBUTYL ETHER - 0.29
MMHG @ 68F; DIETHYLENE GLYCOL MONOMETHYL ETHER - 0.20 MMHG @ 68F; ETHYLENE
GLYC OL MONO-2-ETHYLHEXEL ETHER - 17.5 MMHG @ 20C.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =100.C, 212.F
Vapor Density: > AIR.
Spec Gravity: 1.0 (H2O=1)
VOC Pounds/Gallon: 1.5
VOC Grams/Liter: 166
Evaporation Rate & Reference: SLOWER THAN ETHER.
Solubility in Water: SOLUBLE.
Appearance and Odor: VISCOUS LIQUID. MILD ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: CHEMICALS SUBJECT TO THE REPORTING REQUIREMENTS OF
SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW ACT OF 1986
AND OF 40 CFR 372: PROPYLENE GLYCOL MONOBUTYL ETHER, DIETHYLENE GLYCOL
MONOMETHYL ETHER, AND ETHYLENE GLYCOL MONO-2-ETHYLHEXEL ETHER.
=======================================================
Other Information
=======================================================
Other Information: N/P.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
Company: BENNETTE PAINT MANUFACTURING CO INC
Street: 401 INDUSTRY DR
City: HAMPTON VA
Zipcode: 23661
Health Emergency Phone: 804-838-7777
Label Required IND: Y
Date Of Label Review: 10/19/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: ACUTE: INHALATION: RESIDUAL VAPORS MAY BE IRRITATING TO
EYES, SKIN MUCOUS MEMBRANES, RESPIRATORY TRACT, AND MAY PRODUCE SYMPTOMS OF
HEADACHE, NAUSEA IN POORLY VENTILATED AREAS. EYE CONTACT: DIRECT CON TACT
WITH PAINT MAY RESULT IN EYE IRRITATION. CHRONIC: SKIN: PROLONGED OR REPEATED
CONTACT WITH PAINT MAY CAUSE SKIN IRRITATION. PROLONGED OVEREXPOSURE TO
AIRBORNE DUSTS OF CERTAIN COMPOUNDS IS KNOWN TO CAUSE ADVERSE EFFECTS ON THE
LUNGS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
HASA MURIATIC ACID 7647-01-0
0301-6,QED
1676B-176, HARVEST KING DEXRON III/MERCON ATF
HENRY 595 COVE BASE ADHESIVE
L-4498 SIMILAR TO PRODUCT FAMILY L-6543A
0301-1,QED
O301, QED ENVIRONMENTALLY PREFERRED SOLVENT
STADIS 450 CONDUCTIVITY IMPROVER
AI 8493-2 AIR FORCE TYPE II
DIESEL STARTING FLUID (CYLINDERS 820-0327, 820-0335, 820-127
SERMETEL 1337 PART B
LS-29 (CP-29)
19025, MIL-PRF-17672D GR 2075 TH 64742-54-7
INTERIOR SANDING WOOD SEALER/FINISH, 15-014 96-29-7
8052-41-3
8032-32-4
557-05-1
83307, HI-SPOT BLUE
IMPERIAL 2135TH
UNIFLOR 8991MT
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330085 (ACRYLIC)
ACRYLIC/EPOXY WATERBORNE SEMI-GLOSS/ENAMEL, 330086 (EPOXY)
BACK TO NATURE STRIP-TOX 872-50-4
1119-40-0
627-93-0
C4821A, C4846A, C4872A, C4891A
NOFIRE (R) A18NV INTUMESCENT FIRE RETARDANT COATING
AEROGLAZE 9947B WASH PRIMER, PART B 108-65-6
88917-22-0
64-17-5
7664-38-2
78-92-2
PERMA-SLIK RAC AEROSOL (PPSRACAE)
FB080, BRAKE PREP 111-76-2
6834-92-0
FC-15 GEL
FIRELAND FLOOR TILE ADHESIVE
RTV 5145 PASTE NON-CORR RTV SEALANT 20250 64-17-5
67-56-1
CHISEL GASKET REMOVER SOLVENT 75-09-2
106-97-8
75-28-5
74-98-6
67-56-1
BINDER 350
C4822A, C4847A, C4874A, C4892A
MIL P20689D T1 C1 PLASTISOL, VP694581
343715, FANOX N 33
C4823A, C4848A, C4873A, C4893A
PLASTISEAL "F"
STEPANFOAM C-614-R
INSBOARD 2600, INSBOARD 2600 HD
REMOVABLE THREADLOCKER 242, IN 24231 25852-47-5
9004-96-0
81-07-2
80-15-9
67-56-1
112945-52-5
613-48-9
13463-67-7
PPB-4 NEUTRALIZER SOLUTION, 23688 1310-73-2
7732-18-5
77-86-1
87-69-4
POLYSPEC 700 EPOXY RESIN (700000, 700004) 115-86-6
84852-15-3
TWICELL, NICKEL METAL HYDRIDE BATTERY 7440-02-0
12054-48-7
7440-48-4
7439-96-5
7439-91-0
7440-45-1
7440-00-8
1310-58-3
1310-73-2
1310-65-2
UTP S, AWS ENI-C1 7440-02-0
7782-42-5
1344-09-8
30522, HYDRAULIC JACK OIL 64742-52-5
POLYSPEC "M-50" PRIMER - A708 (708043) 13463-67-7
71-36-3
110-43-0
12001-26-2
25085-99-8
DCI-4A
U500, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7439-98-7
U700, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7439-98-7
7429-90-5
7440-32-6
X750, NICKEL ALLOY 7440-02-0
7440-47-3
7440-48-4
7429-90-5
7440-32-6
7439-89-6
7440-21-3
836, HAI-836 ALLOY 7440-47-3
7439-89-6
7440-02-0
023, HAI-EPX ALLOY 7440-47-3
7440-02-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net