LOCTITE CORP -- 81686 FORM A GASKET SILICONE HIGH TEMP SEALAN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BVTJS
MSDS NAME: 81686 FORM A GASKET SILICONE HIGH TEMP SEALANT
Responsible Party
Name: LOCTITE CORP
Address: 705 N MOUNTAIN ROAD
City: NEWINGTON CT 06111-1411
Info Phone: 203-278-1280
Emergency Phone Number: 203-278-1280
Preparer's Name: STEPHEN REPETTO
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: LOCTITE CORP
Address: 705 N MT RD
City: NEWINGTON CT 06111
=======================================================
Contractor Summary
=======================================================
Name: LOCTITE CORP
Address: 705 N MT RD
City: NEWINGTON CT 06111
Phone: 312-689-6200
Name: LOCTITE CORPORATION
Address: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT 06067-3910
Phone: 860-571-5100
=======================================================
Ingredients
=======================================================
Cas: 63148-62-9
RTECS #: JT6484500
Name: DIMETHYL POLYSILOXANE (MONOMER: DIMETHYL SILOXANE), SILICONE FLUID, DOW
CORNING 200, POLYMETHYLSILOXANE
% Wt: 80-85
------------------------------
Cas: 7631-86-9
RTECS #: VV3100000
Name: SILICON DIOXIDE, CELITE 322
% Wt: 10-15
OSHA PEL: 80 MG/CUM
ACGIH TLV: 0.2 MG/CUM
------------------------------
Cas: 17689-77-9
Name: ETHYLTRIACETOXYSILANE *94-3*
% Wt: 1-3
------------------------------
Cas: 1309-37-1
RTECS #: NO7400000
Name: RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC OXIDE/YELLOW
IRON OXIDE/IRON OXIDE PIGMENT
% Wt: 1-3
OSHA PEL: 10 MG/CUM
ACGIH TLV: 5 MG/CUM (FE)
------------------------------
Cas: 4253-34-3
RTECS #: VV4500000
Name: METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE
% Wt: 1-3
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE & SKIN IRRITANT. MODERATE BY INGESTION.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: EYE & SKIN IRRITANT. MODERATE BY
INGESTION.
Medical Cond Aggravated By Exposure: METHYLTRIACETOXYSILANE: EYE, SKIN &
PULMONARY DISORDERS
First Aid: INGESTION: DON'T INDUCE VOMITING. KEEP CALM. INHALATION: REMOVE TO
FRESH AIR. TREAT SYMPTOMATICALLY. SKIN: WIPE OFF PASTE W/PAPER TOWEL/CLOTH.
WASH EXPOSED AREA W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WIPE/SCRAPE UP MATERIAL. MAINTAIN GOOD VENTILATION
FOR LARGE SPILL. PLACE SCRAP MATERIAL IN A WELL VENTILATED PLACE & ALLOW
TO CURE TO RUBBER.
Waste Disposal Methods: CURED RUBBER CAN BE INCINERATED. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Handling And Storage Precautions: STORE IN A DRY AREA. KEEP CONTAINER CLOSED
WHEN NOT IN USE.
Other Precautions: AVOID EYE/SKIN CONTACT. AVOID BREATHING VAPOR.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: >200F
Lower Limits: 2.6
Upper Limits: 12.5
Extinguishing Media: CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures: NONE
Unusual Fire/Explosion Hazard: NONE
=======================================================
Control Measures
=======================================================
Ventilation: LOCAL FOR PROLONGED USE IN CONFINED AREA.
Protective Gloves: RUBBER/PLASTIC
Eye Protection: SAFETY GLASSES/GOGGLES
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: <5
Spec Gravity: 1.05
Solubility in Water: POLYMERIZED
Appearance and Odor: RED PASTE W/ACETIC ACID.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: MOISTURE
Hazardous Decomposition Products: ACETIC ACID
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 81686 FORM A GASKET SILICONE HIGH TEMP SEALANT
Company: LOCTITE CORP
Street: 705 N MT RD
City: NEWINGTON CT
Zipcode: 06111
Health Emergency Phone: 203-278-1280
Label Required IND: Y
Date Of Label Review: 12/16/1998
Status Code: C
Label Date: 12/16/1998
Origination Code: G
Hazard And Precautions: EYE & SKIN IRRITANT. MODERATE BY INGESTION.
EYE
& SKIN IRRITANT. MODERATE BY INGESTION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.