3M GENERAL OFFICES -- SCOTCH-WELD DP-460 (PART B) OFF-WHITE EPOXY (
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXDXD
MSDS NAME: SCOTCH-WELD DP-460 (PART B) OFF-WHITE EPOXY (SUP DAT)
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST. PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MODERATE EYE IRRIT: SIGNS/SYMPTOMS CAN INCLUDE
REDNESS, SWELLING, PAIN, TEARING, & HAZY VISION. VAPS FROM HEATED MATL
MAY CAUSE EYE IRRIT. DUST CREATED BY CUTTING, GRINDING, SANDING/MACHINING MA
Y CAUSE EYE IRRIT. SKIN: ALLERGIC SKIN RXN: SIGNS/SYMPTOMS CAN INCLUDE
REDNESS, SWELLING, BLISTERING (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: ITCHING. MILD SKIN IRRIT:
SIGNS/SYMP CAN INCLUDE REDNESS, SWELLING, & ITCHING. INHAL: IRRIT (UPPER
RESP): SIGNS/SYMP CAN INCLUDE SORENESS OF NOSE & THROAT, COUGHING &
SNEEZING. VAPS OF HEATE D MATL MAY CAUSE RESP SYS IRRIT. DUST FROM CUTTING,
GRINDING, SANDING/MACHINING MAY CAUSE IRRIT OF RESP SYS. (SUP DAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN. GET IMMED
MD ATTN. SKIN: IMMED WASH W/SOAP & LGE AMTS OF WATER. REMOVE CONTAM
CLTHG. IF SIGNS/SYMP OCCUR, CALL MD. WASH CONTAM CLTHG BEFORE R EUSE &
DISPOSE OF CONTAM SHOES. INHAL: IF SIGNS/SYMP OCCUR, REMOVE PERS TO FRESH
AIR. IF SIGNS/SYMP CONTINUE, CALL MD. INGEST: DO NOT INDUCE VOMIT. DRINK TWO
GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFORMATION
REGARDING PHYSICAL & HLTH HAZ, RESP PROT, VENT, & PERSONAL PROT
EQUIP. CALL (612) 733-1110/(612) 733-6100 FOR 24-HOUR SPILL ASSISTANCE. COVER
W/ABS ORBENT MATL. COLLECT SPILLED MATL. PLACE
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCIN UNCURED
WASTE IN INDUSTRIAL/COMMERCIAL INCINERATOR. DISP OF COMPLETELY CURED (OR
POLYMERIZED) MATL IN A SANITARY LANDFILL. ALL DISP MUST BE IN ACCORDANC E
W/LOCAL, STATE & FEDERAL REGS (FP N).
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP OUT OF REACH OF
CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: >340F,171C
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N), BUNKER COAT & PANTS, BANDS AROUND ARMS, WAIST & LEGS, FACE MASK,
& PROT COVERING FOR EXPOS AREAS OF HEAD.
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID INHAL OF VAPS CREATED DURING CURE CYCLE. AVOID
INHAL OF DUST CREATED BY CUTTING, SANDING/GRINDING. SELECT ONE OF FOLLOWING
NIOSH APPRVD RESP BASED ON AIRBORNE CONC OF CONTAMINANTS & IN ACCORDANC E
W/OSHA REGS: HALF-MASK DUST RESP.
Ventilation: PROVIDE APPROPRIATE LOC EXHAUST FOR GRINDING, CUTTING/SANDING
CURED MATL. CURING OVENS MUST BE EXHAUSTED TO
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPRVD CHEM WORK GOGG (FP N).
Other Protective Equipment: EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK/SMOKE WHEN USING THIS PROD. WASH
EXPOSED AREAS THORO W/SOAP & WATER. DO NOT INGEST.
Supplemental Safety and Health: TRADE NAME/PART NO: ADHESIVE (1PB). USERS OF
THE "L" VERSION OF TO CONSULT "LR" VERSION FOR ADDITIONAL INFO (FP N). EFTS
OF OVEREXP: INGEST: IRRIT OF GI TISS: SIGNS/SYMP CAN INCLUDE PAIN, VOMIT,
ABDOM SORE, NAUSEA, BLOOD IN VOMITUS, &BLOOD IN FECES. OTHER HLTH HAZ
INFO: EXPOS TO THIS MATL IN NORM STOR &
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.140 (WATER=1)
Solubility in Water: NIL
Appearance and Odor: VISCOUS LIQUID, WHITE, VERY MILD ODOR
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG ACIDS, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE & CARBON DIOXIDE, ALDEHYDES,
KETONES, HYDROCARBONS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-460 (PART B) OFF-WHITE EPOXY (SUP DAT)
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 03/20/1995
Status Code: C
Label Date: 03/20/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: EYES: MODERATE EYE IRRIT, REDNESS,
SWELLING, PAIN, TEARING, & HAZY VISION. VAPS FROM HEATED MATL MAY CAUSE
EYE IRRIT. DUST CREATED MAY CAUSE EYE IRRIT. INHAL: IRRIT, SORENESS OF NO SE
& THROAT, COUGHING & SNEEZING. VAPS OF HEATED MATL MAY CAUSE RESP SYS
IRRIT. DUST MAY CAUSE IRRIT OF RESP SYS. INGEST: IRRIT OF GI TISSUE, PAIN,
VOMIT, ABDOM SORE, NAUSEA, BLOOD IN VOMITUS, & BLOOD IN FECES. CHRONIC:
SKIN:ALLERGIC SKIN RXN, REDNESS, SWELLING, BLISTERING, & ITCHING.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|