DRYDEN OIL CO -- TEC II MOTOR OIL, 10W-40
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXFBQ
MSDS NAME: TEC II MOTOR OIL, 10W-40
Responsible Party
Name: DRYDEN OIL CO
Address: 9300 PULASKI HIGHWAY
City: BALTIMORE MD 21220
Info Phone: 301-574-5000
Emergency Phone Number: 800-777-1466
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DRYDEN OIL CO INC
Address: 9300 PULASKI HWY
City: BALTIMORE MD 21220
Phone: 301-574-5000
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHAL:VAPOR PRESSURE IS VERY LOW. VAPOR INHALATION UNDER
AMBIENT TEMPERATURE CONDITIONS IS NOT NORMALLY A PROBLEM. SKIN:PROLONGED OR
REPEATED CONTACT MAY CAUSE IRRITATION. EYE:SLIGHT IRRITATION. INGES
T:RELATIVELY NON-TOXIC.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE:FLUSH W/CLEAR WATER FOR AT LST 15 MINS/UNTIL IRRIT SUBSIDES. IF
IRRIT PERSISTS, CALL MD. SKIN:REMOVE ANY CONTAM CLTHG & WASH SKIN THORO
W/SOAP & WATER. INGEST:DO NOT INDUCE VOMIT; CALL MD IMMED. I NHAL:IMMED
REMOVE FROM EXPOS & CALL MD.ADMIN OXYGEN, IF AVAIL. IF OVER-EXPOSED TO
OIL MIST, REMOVE FROM FURTHER EXPOS UNTIL EXCESSIVE MIST OIL CONDITION
SUBSIDES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REPORT SPILLS AS REQD TO APPROP AUTHS. U.S. COAST
GUARD REGS REQ IMMED REPORTING OF SPILLS THAT COULD REACH ANY WATERWAY INCL
INTERMITTENT DRY CREEKS. REPORT SPILL TO COAST GUARD TOLL FREE NUMBER 800-
424-8802. RECOVER FREE PROD. ADD SAND,
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N).
Handling And Storage Precautions: USE PROD W/CAUT AROUND HEAT, SPKS, PILOT
LIGHTS, STATIC ELEC & OPEN FLAME. KEEP CNTNRS & STOR CNTNRS CLSD WHEN
NOT IN USE.
Other Precautions: DO NOT STORE NEAR HEAT, SPKS, FLAME/STRONG OXIDANTS. "EMPTY"
CNTNRS RETAIN RESIDUE (LIQ &/OR VAP) & CAN BE DANGEROUS. DO NOT
PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND/EXPOSE SUCH CNTNRS TO HE
AT, FLAME, SPKS/OTHER SOURCES OF
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: >390F,>199C
Lower Limits: 0.9%
Upper Limits: 7%
Extinguishing Media: FOAM, WATER SPRAY (FOG), DRY CHEM, CARBON DIOXIDE &
VAPORIZING LIQ TYPE EXTING AGENTS MAY ALL BE SUITABLE FOR (SUPDAT)
Fire Fighting Procedures: USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N). PLAN FIRE PROT & RESPONSE STRATEGY THRU CONSULTATION W/LOC FIRE PROT
AUTHS/APPROP SPECIALISTS. USE (SUPDAT)
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS OF USE
& W/ADEQUATE VENTILATION.
Ventilation: NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS OF USE.
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: REMOVE CONTAM CLTHG; LAUNDER/DRY CLEAN BEFORE REUSE.
REMOVE CONTAM SHOES & THORO CLEAN BEFORE REUSE; DISCARD IF
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). SPEC GRAV:0.8762-0.8899 (H*2O=1). EXTING
MEDIA:EXTING FIRES INVOLVING THIS TYPE OF PROD, DEPENDING ON SIZE/POTNTL SIZE
OF F IRE & CIRCUMSTANCES RELATED TO SITUATION. FIRE FIGHT PROC:WATER TO
KEEP FIRE-EXPOS CNTNRS COOL. IF LEAK/SPILL HAS
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NEGLIGIBLE
Vapor Density: HVR/AIR
Spec Gravity: SUPP DATA
Evaporation Rate & Reference: NEGLIGIBLE
Solubility in Water: NEGLIGIBLE (
Appearance and Odor: CLEAR, DARK AMBER LIQUID; MILD, BLAND PETROLEUM ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID HEAT & OPEN FLAMES.
Materials To Avoid: AVOID OXIDIZING MATERIALS.
Hazardous Decomposition Products: THERMAL DECOMP PRODS ARE HIGHLY DEPENDENT ON
COMBUST CNDTNS. COMPLEX MIXT OF AIRBORNE SOLID, LIQ, PARTICULATES &
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TEC II MOTOR OIL, 10W-40
Company: DRYDEN OIL CO INC
Street: 9300 PULASKI HWY
City: BALTIMORE MD
Zipcode: 21220
Health Emergency Phone: 800-777-1466
Label Required IND: Y
Date Of Label Review: 03/27/1995
Status Code: C
Label Date: 03/27/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE:SKIN:PROLONGED OR REPEATED CONTACT MAY CAUSE
IRRITATION. EYE:SLIGHT IRRITATION. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.