Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF UPPER
RESPIRATORY SYSTEM, HEADACHE, NAUSEA & DIZZINESS. SKIN/EYES:
IRRITATION, REDNESS, ITCHING & BURNING SENSATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION OF UPPER RESPIRATORY
SYSTEM, HEADACHE, NAUSEA & DIZZINESS. SKIN/EYES: IRRITATION,
REDNESS, ITCHING & BURNING SENSATION.
======================= First Aid Measures =======================
Eyes: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR OR
OXYGEN IF NEEDED. KEEP WARM & QUIET. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>199F
Extinguishing Media:CO2, DRY CHEMICAL & FOAM
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA. REMOVE WITH INERT ABSORBENT MATERIALS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE <90F. USE VENTILATION. AVOID
BREATHING VAPOR/MIST/CONTACT W/SKIN/EYE. KEEP CONTAINER CLOSED.
DON'T MIX MATERIAL BACK INTO CAN OF UNMIXED FILLER.
Other Precautions:CONTAINS MATERIALS CLASSIFIED AS NUISANCE
PARTICULATES WHEN SANDING/ABRADING OF DRIED FILM. TRANSFER TO
APPROVED CONTAINERS W/APPROPRIATE LABLES. DON'T TAKE INTERNALLY.
KEEP AWAY FROM CHILDREN. MUST B E MIXED W/OTHER COMPONENTS BEFORE
USE.
Respiratory Protection:IF >TLV, WEAR A PROPERLY FITTED ORGANIC
VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA. WEAR A DUST
MASK OR PARTICULATE RESPIRATOR WHEN SANDING OR ABRADING THE DRIED
FILM.
Ventilation:PROVIDE LOCAL EXHAUST/MECHANICAL VENTILATION TO KEEP
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
WT/GAL: 9.29 LB.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:NO
CATALYSTS AS PEROXIDES, STRONG ACIDS
Stability Condition to Avoid:HEAT, SOURCES OF IGNITION, SANDING,
ABRADING & DUST. DON'T STORE <90F.
Hazardous Decomposition Products:CO & CO2
Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE CLOSED CONTAINERS.
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
INCINERATE IN APPROVED FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.