===================== Product Identification =====================
MSDS NAME:EA 9323 PART B
NIIN:01-288-5858
Kit Part:Y
MSDS Number: BKKJB
=== Responsible Party ===
Company:HYSOL AEROSPACE & INDUSTRIAL PRODUCTS DIV, DEXTER
Address:2850 WILLOW PASS ROAD,
Box:312
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Info Phone Num:415-687-4201
Emergency Phone Num:415-687-4201
CAGE:HYSOL
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
Company:HYSOL AEROSPACE & INDUSTRIAL PRODUCTS
Address:2850 WILLOW PASS ROAD
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Phone:415-687-4201 X362 X319
CAGE:HYSOL
Company:STEVEN INDUSTRIES
Address:39 AVENUE C
Box:8
City:BAYONNE
State:NJ
ZIP:07002-3417
Country:US
Phone:201-437-6501
CAGE:33150
============= Composition/Information on Ingredients =============
Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: < 12%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSTIC ALKALINE/CORROSIVE. RELATIVELY
NON-TOXIC BY INGESTION. SKIN OR EYE CONTACT MAY CAUSE MODERATE
IRRITATION OR BURNS. SKIN SENSITIZATION, RASH, CHEMICAL BURNS. AT
ELEVATED TEMPS OR IN CONFINED AR EAS, INHALATION MAY CAUSE THROAT
IRRIT.HIGH CONCENTRATION OF VAPORS CAUSES RESPIRATORY IRRIT, COUGH,
NAUSEA & VOMITING.
Explanation of Carcinogenicity:DIETHYLENETRIAMINE IS ON THE THE CALIF
DIRECTOR'S LIST OF HAZAROUS SUBSTANCES BUT NOT AN OSHA CARCINOGEN
OR POTENTIAL.
Effects of Overexposure:CHEST DISCOMFORT AND BRONCHITIS SYMPTOMS.
======================= First Aid Measures =======================
First Aid:EYE: IRRIGATE WITH LARGE AMOUNTS OF WATER FOR A MINIMUM OF 15
MIN. MEDICAL AID FOR ASSESSMENT OF INJURIES. SKIN: WASH WITH SOAP &
WATER (PREFER SAFETY SHOWER) FOR 15 MIN IMMEDIATELY. REMOVE ALL
CONTAM INATED CLOTHES. INHALE: REMOVE TO UNCONTAMINATED ATMOSPHERE,
GET MEDICAL AID. INGEST: DRINK LARGE AMOUNTS OF WATER OR MILK. GET
IMMEDIATE MEDICAL AID.
===================== Fire Fighting Measures =====================
Flash Point:>300F,>149C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM OR
CARBON DIOXIDE.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOSURES
AND TO DILUTE SPILLS TO NONFLAMMABLE MIXTURES.
Unusual Fire/Explosion Hazard:CARE MUST BE USED TO PREVENT IGNITION
WHEN PROCESSING OR HANDLING AT TEMPERATURES ABOVE THE FLASH POINT.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS OR USE DETERGENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP PRODUCT COOL IN ACCORDANCE WITH
LABEL INSTRUCTIONS. FOLLOW RECOMMENDED CURING SCHEDULE.
Other Precautions:*SURFACES TO BE BONDED. FAILURE TO OBSERVE CAUTIONS
MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC
GASES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL (GENERAL)
RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:405F,207C
Vapor Pres:0.37 MM
Vapor Density:3.48
Spec Gravity:0.951
Evaporation Rate & Reference:LOW (BU AC=1)
Solubility in Water:100%
Appearance and Odor:AMBER COLORED PASTE WITH AMMONIACAL ODOR
Percent Volatiles by Volume:LOW
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, NO2, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN AND AND CURING
AGENT IN BATCHES GREATER THAN 1 POUND TOTAL. DO NOT HEAT MIX ABOVE
75F UNLESS CURING*
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.
DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION AS
REGULATED BY ALL GOVERNMENTAL AGENCIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|