===================== Product Identification =====================
MSDS NAME:EA 9323 PART A
NIIN:01-288-5858
Kit Part:Y
MSDS Number: BKKHZ
=== Responsible Party ===
Company:HYSOL AEROSPACE & INDUSTIRAL PRODUCTS, DEXTER CORP
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Info Phone Num:415-687-4201
Emergency Phone Num:415-687-4201
CAGE:HYSOL
=== Contractor Identification ===
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564
Company:HYSOL AEROSPACE & INDUSTRIAL PRODUCTS
Address:2850 WILLOW PASS ROAD
City:PITTSBURG
State:CA
ZIP:94565
Country:US
Phone:415-687-4201 X362 X319
CAGE:HYSOL
Company:STEVEN INDUSTRIES
Address:39 AVENUE C
Box:8
City:BAYONNE
State:NJ
ZIP:07002-3417
Country:US
Phone:201-437-6501
CAGE:33150
============= Composition/Information on Ingredients =============
Name:TRIGLYCIDYL P-AMINOPHENOL EPOXY RESIN
CAS:5026-74-4
Fraction by Wt: < 55%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
======================= First Aid Measures =======================
First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS OR INCREASES, SEE PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS, OR USE DETERGENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. FOLLOW RECOMMENDED CURING SCHEDULE.
Other Precautions:*SURFACES TO BE BONDED. FAILURE TO OBSERVE CAUTIONS
MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC
GASES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL IS RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01 MM
Vapor Density:NIL
Spec Gravity:> 1
Evaporation Rate & Reference:NIL (BU AC=1)
Solubility in Water:NIL
Appearance and Odor:TAN PASTE WITH SLIGHT CHARACTERISTIC ODOR
Percent Volatiles by Volume:<0.01
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NO2, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIX RESIN/CURING AGENT IN
BATCHES GREATER THAN 1 LB TOTAL. DO NOT HEAT MIXED ADHESIVE ABOVE
75F UNLESS CURING *
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED DISPOSE OF AS ORM-E. DISPOSAL METHOD
CAN BE LAND BURIAL OR CHEMICAL INCINERATION AS REGULATED BY ALL
GOVERNMENTAL AGENCIES .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|