===================== Product Identification =====================
MSDS NAME:AMOCO NO. 2 KORITE ASPHALT
NIIN:00N014720
MSDS Number: BKMLY
=== Responsible Party ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DRIVE
City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Info Phone Num:312-856-3907
Emergency Phone Num:800-447-8735,800-424-9300(CHEMTREC)
CAGE:15958
=== Contractor Identification ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DR
Box:City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Phone:312-856-3907- EM HLTH: 800 447-8735
CAGE:15958
============= Composition/Information on Ingredients =============
Name:PETROLEUM ASPHALT, OXIDIZED TLV FOR ASPHALT (PETROLEUM)
FUMES CAS # 8052-42-4.
CAS:64742-93-4
ACGIH TLV:5 MG/M3
Name:HYDROGEN SULFIDE (SARA III)
CAS:7783-06-4
RTECS #:MX1225000
OSHA PEL:(C),20 PPM
ACGIH TLV:10 PPM/15 STEL; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:SUPP DATA: BRONCH, PNEUM & ABSCESS FORMATION, AMONG OTHERS,
SIMILAR TO PROBLEMS CAUSED BY OTHER NON-SPECIFIC IRRITANTS.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:EYE: HEATED MATL CAN CAUSE THERMAL
BURNS. SKIN: HEATED MATL CAN CAUSE THERMAL BURNS. COLD MATL: NONE
EXPECTED FOR A SINGLE SHORT-TERM EXPOS. CAN CAUSE SKIN IRRIT ON
PRLNG OR RPTD CONT. INHAL: VAPS CON TAINING HYDROGEN SULFIDE MAY
ACCUM DURING STORAGE OR TRANSPORT OF ASPHALTIC MATLS, PARTICULARLY
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:ASPHALT: LIMITED EVIDENCE.
Effects of Overexposure:HLTH HAZ: THOSE THAT CONTAIN LITTLE DILUENT.
INGEST: IF A LARGE AMOUNT IS SWALLOWED, INDUCE VOMITING. GET MD.
PRLNG BRTHG (GREATER THAN ONE HR OF CONC OF H2S AROUND 50 PPM CAN
PRODUCE EYE & RESP TRACT IRRIT: LEVS OF 250 TO 600 PPM WILL RESULT
IN FLUID IN LUNGS, AND CONC AROUND 1,000 PPM WILL CAUSE UNCON (SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: HOT & COLD MATL: IMMED FLUSH EYE WITH PLENTY OF WATER
FOR AT LEAST 15 MINUTES. GET MD IMMED. SKIN: HOT MATL: IMMED FLUSH
IN COOL WATER FOR AT LEAST 15 MIN. GET MD IMMED. COLD MATL: CLEAN
EXPOSED SKIN WITH WATERLESS HAND CLEANER. INHAL: IF ADVERSE
EFFECTS OCCUR, REMOVE TO UNCONTAMINATED AREA. GIVE ARTF RESP IF NOT
BREATHING. GET MD. INGEST: IF LRG AMT IS SWALLOWED, INDUCE VOMIT.
GET MD.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:475F,246C
Extinguishing Media:AGENTS APPROVED FOR CLASS B (E.G., DRY CHEMICAL,
CO2, HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:IF HYDROGEN SULFIDE IS PRESENT, FLAM LIMS
CAN BE FROM 4.3 TO 45.5% BY VOLUME & ITS PRESENCE MAY PROMOTE THE
FORMATION OF PYROPHORIC IRON COMPOUNDS.
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN AND REMOVE BY MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP ADEQ VENT. OUTSIDE STORAGE IS
REC. HYDROGEN SULFIDE (H2S) GAS MAY ACCUM IN STORAGE TANKS & BULK
TRANSPORT COMPARTMENTS CONTAINING ASPHALTS.
Other Precautions:ALWAYS EXERCISE CAUTION WHEN WORKING AROUND CLSD BULK
CNTNRS OF ASPHALTS. WARNING! VAP MAY CONTAIN HYDROGEN SULFIDE (H2S)
GAS WHICH CAN BE HARMFUL/FATAL IF INHALED. HEATED MATL CAN CAUSE
SEVERE BURNS. COLD MATL CAN CAUSE SKIN IRRIT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF OPERATING CONDITIONS CAUSE HIGH VAPOR
CONCENTRATION OR TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
SUPPLIED-AIR RESPIRATOR.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
DECOMP PRODS: CO AND/OR CO2 AND OTHER HARMFUL PRODUCTS. EFTS OF
OVEREXP: AND DEATH IN A SHORT PERIOD OF TIME. LAB ANIMALS EXPOSED
TO RPTD APPLICATNS OF ASPHALT MATL FOR THEIR ENTIRE LIFE HAVE
DEVELOPE D SKIN TUMORS PRIMARILY AT SITE OF APPLICATN. LUNG DAMAGE
IN TEST ANIMALS WAS OBSERVED. FINDINGS INCLUDED (SEE ING 3)
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:0.97
Solubility in Water:<0.1%
Appearance and Odor:DARK BROWN TO BLACK VISCOUS FLUID.
================= Stability and Reactivity Data =================
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HYDROGEN SULFIDE & OTHER TOXIC VAPORS ARE
GIVEN OFF AT ROOM TEMPERATURE.
Hazardous Decomposition Products:TOXIC HYDROGEN SULFIDE GAS & OTHER
SULFUR- CONTAINING GASES CAN BE GIVEN OFF WHEN HEATED. BURNING CAN
PRODUCE (SUPP DATA
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE, OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION IS RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|